Electric charge
In a minute
Objects can carry positive or negative : like charges repel and unlike charges attract. Rubbing two materials together moves from one to the other, which is how a plastic rod or a balloon gets charged. Metals let charge move through them because they have ; plastics, rubber and glass don't.
You'll be able to
- State that there are two kinds of charge, and say which pairs of charges repel and which attract.
- Explain charging by rubbing as a transfer of electrons, and describe experiments that make charge and detect it.
- Describe a test that sorts materials into conductors and insulators, and explain the difference using electrons, with examples of each.
- State the unit of charge, and describe an and its direction.
- Draw the field pattern around a point charge, around a charged sphere and between two oppositely charged plates.
Before you start3 quick questions on what this builds on
Revise first: 1.1 Physical quantities and measurement techniques, 1.5.1 Effects of forces, 2.1.2 Particle model, 2.3.1 Conduction and 4.1 Simple phenomena of magnetism
Positive and negative charge
Electric charge comes in two kinds: positive (+) and negative (−). Most objects are neutral. They hold equal amounts of both kinds, so the charges cancel out.
Where does charge come from? Every atom has a tiny nucleus at its centre, which is positive. Around the nucleus are , which are negative. A neutral atom has equal amounts of positive and negative charge.
In a solid, the nuclei are held in place and cannot move from one object to another. Some electrons can. So a solid becomes charged by gaining or losing electrons.
An object that gains electrons has more negative charge than positive, so it is negatively charged. An object that loses electrons is left with more positive charge than negative, so it is positively charged.
Rubbing two different materials together charges them both. Friction between the surfaces moves electrons from one material to the other. Rub a polythene rod with a dry woollen cloth: electrons move from the cloth onto the rod. The rod becomes negative and the cloth becomes positive, by the same amount.
Try it first, then reveal one step at a time.
- Name the particles that move: only electrons can transfer between solids.
- Decide the direction: the strip ends up positive, so it must have lost electrons.
- Say where those electrons went, and what that does to the cloth.
- Friction between the strip and the cloth moves electrons from one to the other. Only electrons move; the positive charges stay in the nuclei. The strip loses electrons to the cloth, so it is left positively charged. The cloth gains these electrons, so the cloth is negatively charged.
Try it first, then reveal one step at a time.
- Start from the bead whose charge you know: Z is negative.
- Y attracts Z. Two charged objects attract only when their charges are unlike, so Y is positive.
- X repels Y. Repulsion means like charges, so X has the same charge as Y.
- Y is positive, because it attracts the negative bead Z and unlike charges attract. X is positive, because it repels Y and like charges repel.
Experiments that make and detect charge
Papers 3/4 and 5/6 can ask you to describe these experiments. Use plastic rods such as polythene or acetate. On plastic, the charge stays where you rubbed it.
1. Make charge: rub a polythene rod firmly with a dry woollen cloth for a few seconds.
2. Detect it: hold the rod just above some tiny pieces of paper. The pieces jump up to the rubbed rod. An unrubbed rod does nothing, so the rubbing made the difference.
3. Test like and unlike charges: hang a rubbed polythene rod in a paper stirrup on a thread, so it can turn freely. Bring a second rubbed polythene rod near one end: the hanging rod turns away. Bring a rubbed acetate rod near instead: the hanging rod turns towards it, because rubbed acetate is positive.
A gold-leaf electroscope also detects charge. It has a metal cap on a metal rod, with a thin gold leaf hanging against the bottom of the rod. Touch the cap with a charged rod and charge spreads over the cap, rod and leaf. The leaf and the metal rod now have like charges, so the leaf is pushed out and rises.
Try it first, then reveal one step at a time.
- Start with a control: show the unrubbed balloon has no effect.
- Say what you rub it with, and how.
- Say what you do next and what you see, then the conclusion.
- Hold an unrubbed balloon just above some tiny pieces of paper: nothing happens. Rub the balloon firmly with a dry woollen cloth for a few seconds. Hold it above the paper again. The pieces of paper jump up and stick to the balloon. So the rubbed balloon is now charged.
Conductors and insulators
An is a material that lets charge flow through it easily. An is a material that does not let charge flow through it.
To test a material, set up a circuit with a cell, a lamp and two crocodile clips with a gap between them. First touch the clips together: the lamp should light, which shows the circuit works. Then clip the sample across the gap.
If the lamp lights, the sample is a conductor. If it stays off, the sample is an insulator. An ammeter in series with the lamp is more sensitive: it shows a current too small to light the lamp.
Why the difference? In a metal, some electrons are not held by any one atom. These can drift through the whole metal, carrying charge with them.
In an insulator, every electron is held tightly in its own atom. There are no free electrons, so charge cannot move through the material.
Good conductors: metals such as copper, aluminium and steel, and graphite (a form of carbon). Insulators: plastics such as PVC and polythene, rubber, glass, dry wood and dry air.
This is also why rubbing charges a plastic rod but not a metal rod you hold in your hand. On the plastic, the extra electrons stay put. On the metal, charge flows away through the metal and through you.
Try it first, then reveal one step at a time.
- For copper, name the particles that carry the charge and say why they can move.
- For rubber, say what is different about its electrons.
- Finish each part with the conclusion: conductor or insulator.
- In copper, a metal, some electrons are not held by any one atom: they are free electrons. These free electrons can move through the copper, so charge flows through it easily. So copper is a good conductor. In rubber, every electron is held tightly in its atom. Rubber has no free electrons, so charge cannot flow through it, and it is an insulator.
Electric fields Extended only
Charge is measured in , symbol C. You will use this unit in 4.2.2, where current is the charge passing a point each second.
Field lines show a field. Each line carries an arrow for the field's direction, and the lines never cross. A positive charge is pushed away from positive charges and pulled towards negative ones, so the arrows point away from positive charges and towards negative charges.
Point charge: straight lines spreading out in all directions, like the spokes of a wheel. The arrows point outwards for a positive charge and inwards for a negative charge.
Charged metal sphere: outside the sphere, the same spoke pattern as a point charge. The lines start or end on the surface and meet it at right angles.
Two parallel plates with opposite charges: straight, parallel, evenly spaced lines from the positive plate to the negative plate, at right angles to both. Near the edges of the plates the lines curve, but this is not examined.
Try it first, then reveal one step at a time.
- Shape: the field between parallel plates is the same everywhere in the middle.
- Spacing and angle: show that with even spacing, meeting the plates square on.
- Direction: arrows go the way a positive charge would be pushed.
- Draw straight lines from one plate to the other, parallel to each other and evenly spaced. Each line meets the plates at right angles. Put an arrow on each line pointing from the positive plate to the negative plate, so from left to right.
Try it first, then reveal one step at a time.
- The field points from the positive plate to the negative plate.
- The speck is negative, so the force on it is opposite to the field.
- The field points downwards, from the positive top plate to the negative bottom plate. The speck is negative, so the force on it is opposite to the field: upwards.
Common mistakes
- Saying protons or positive charges move during rubbing. Only electrons transfer; a positive object has lost electrons.
- Getting the rule backwards. Between two charged objects, attraction means unlike charges and repulsion means like charges.
- Writing about poles or magnetism in an answer about charge. Charges are positive or negative, and the force between them is electric.
- Saying a metal conducts because its protons or atoms move. Only the free electrons move.
- Extended: drawing field arrows from negative to positive. They point away from + and towards −.
Exam tips
- "Explain" how a rod becomes charged: name electrons, say which way they move, and give the charge on both the rod and the cloth.
- "Describe" an experiment: say what you rub with what, what you bring near what, and what you see, such as "the hanging rod turns away".
- Extended: "draw" field lines with a ruler, an arrow on every line, and lines that touch the charge or the plates. Between plates, keep them parallel and evenly spaced.
Key takeaways
Practise this
27 past-paper questions on Electric charge in the 0625 Extended bank, each with a mark scheme and a worked explanation.