A circuit carries from a cell or the mains to its components, which pass it on to the surroundings. P=IV says how fast that happens, and the transferred is E=IVt. Electricity companies charge you per : the energy a 1 kW appliance transfers in 1 hour.
You'll be able to
Describe how a circuit moves energy from a cell or the mains supply to its components, and from them to the surroundings.
Calculate electrical power with P=IV, and rearrange it to find a current or a p.d.
Calculate the energy a component transfers with E=IVt, or with E=Pt when you know its .
Define the kilowatt-hour and work out what it costs to run an appliance.
Before you start2 quick questions on what this builds on
Check yourself
A pump transfers 4500J of energy in 90s. What is its power, in W?
Check yourself
A lamp is connected to a cell. How does the current going into the lamp compare with the current coming out of it?
A cell or the mains supply is a source of energy for a circuit. When there is a current, the source does electrical work: it transfers energy to the components the current passes through.
Each component passes that energy on to the surroundings. A lamp gives out light and heats the air around it. A heater just heats. A motor makes things move, and friction and sound then pass that energy to the surroundings too.
Energy flows from the source, through the components, into the surroundings.
By , none of it is destroyed. In the end it spreads out into the internal (thermal) of the surroundings, which warm up very slightly. Energy stored on the way, such as in a charging phone's battery, ends up there too once it is used.
Worked exampleAn electric fan is plugged into the mains and switched on. Describe the energy transfers, from the mains supply to the surroundings.
Try it first, then reveal one step at a time.
Start at the source and say how the energy reaches the fan.
Name the useful store the motor fills.
Name the wasted transfers, then say where all the energy ends up.
The current does electrical work, carrying energy from the mains supply to the fan's motor. The motor turns the blades, so energy goes into the kinetic store of the blades and the moving air. Some energy is wasted by heating the motor and as sound. In the end all the energy spreads out into the surroundings, which warm up slightly.
Check yourself
A torch is left switched on until its battery is flat. Where has the energy from the battery ended up?
Electrical power: P = IV
is how fast energy is transferred. For a component in a circuit, two things set its power. A bigger means more charge passes through it each second. A bigger means each unit of charge transfers more energy in it.
Learn this
P=IV
P is the in watts (W), I is the current in the component in amperes (A), and V is the p.d. across it in volts (V). Rearranged: I=VP and V=IP.
Worked exampleA car cool box is connected to a 12V car battery. The current in it is 4.5A. Calculate the power of the cool box.
Try it first, then reveal one step at a time.
Write the equation: P=IV.
Substitute: P=4.5×12.
P=54W
P=54W
Worked exampleA kettle has a power of 2.8kW when it is connected to the 230V mains. Calculate the current in the kettle.
Try it first, then reveal one step at a time.
Convert the power to watts: 2.8kW=2800W.
Rearrange P=IV to I=VP.
Substitute: I=2302800=12.17…A
The power, 2.8kW, has only 2 significant figures, so give 12A.
I≈12A
Check yourself
The p.d. across a lamp is 6.0V and the current in it is 0.50A. What is the power of the lamp?
Check yourself
A laptop charger takes 65W from the 230V mains. What is the current in it, in A, to 2 significant figures?
Electrical energy: E = IVt
Power is energy transferred per second. So the energy transferred in a time t is the power multiplied by the time, E=Pt. Put P=IV into this and you get the equation for .
Learn this
E=IVt
E is the energy transferred in joules (J), I is the current in A, V is the p.d. in V and t is the time in seconds (s). Convert minutes and hours to seconds first: 1min=60s and 1h=3600s.
Worked exampleA phone charges at 5.0V with a current of 1.8A for 40 minutes. Calculate the energy transferred to the phone, in kJ.
Try it first, then reveal one step at a time.
Convert the time to seconds: t=40×60=2400s.
Write the equation: E=IVt.
Substitute: E=1.8×5.0×2400=21600J.
Convert to kJ and round to 2 significant figures, as the data are: 21.6kJ≈22kJ.
E≈22kJ
Worked exampleA lamp is marked "230V, 40W". It works normally for 15 minutes. Calculate the energy it transfers.
Try it first, then reveal one step at a time.
The marking gives the power directly: P=40W. You don't need the p.d. to find the energy.
Convert the time: t=15×60=900s.
Use E=Pt: E=40×900=36000J, which is 36kJ.
E=36kJ
Check yourself
A small heater is connected to a 9.0V supply. The current in it is 0.50A. How much energy does it transfer in 3.0 minutes?
Check yourself
A motor runs from a 24V supply. It transfers 3600J in 50s. What is the current in the motor, in A?
The kilowatt-hour and the cost of electricity
A joule is a tiny amount of energy for a home: a kettle transfers thousands every second. So electricity companies measure energy in a much bigger unit, the kilowatt-hour (kW h).
The kW h is a unit of energy, not power. In joules: 1kW h=1000W×3600s=3600000J, which is 3.6MJ.
To find a cost, use E=Pt with the power in kW and the time in hours. That gives the energy in kW h. Then multiply by the price of one kW h.
Learn this
cost=energy in kW h×price per kW h
Worked exampleA 2.2kW electric heater is switched on for 3.5 hours. Electricity costs $0.28 per kW h. Calculate the cost of using the heater.
Try it first, then reveal one step at a time.
Energy in kW h: E=Pt=2.2×3.5=7.7kW h.
Cost: 7.7×0.28=2.156 dollars.
Round to the nearest cent: $2.16.
cost=$2.16
Worked exampleA fridge has a power of 150W. Its motor runs for a total of 10 hours each day. Electricity costs 32 cents per kW h. Calculate the cost of running the fridge for 30 days, in dollars.
Try it first, then reveal one step at a time.
Convert the power to kW: 150W=0.150kW.
Total time: 10×30=300 hours.
Energy: E=Pt=0.150×300=45kW h.
Cost: 45×32=1440 cents, which is $14.40.
cost=$14.40
Check yourself
How many joules are there in 1kW h?
Check yourself
An oven of power 3.0kW is used for 40 minutes. Electricity costs 30 cents per kW h. What does this cost, in cents?
Common mistakes
Dividing V by I (or I by V) for the power. Power is the product: P=IV.
Leaving the time in minutes or hours in E=IVt. Convert to seconds first: 1min=60s and 1h=3600s.
Using the voltage marked on an appliance as well as its power. For energy from a power rating, E=Pt is all you need.
Mixing W and kW in a cost calculation. Use the power in kW and the time in hours to get kW h.
Forgetting to multiply by every hour or day of use when finding a total cost.
Giving an energy in W, or a power in J. Energy is in J (or kW h); power is in W.
Exam tips
"Calculate" the power or the energy: write the equation, then the numbers, then the answer with its unit. The equation and substitution lines can earn marks even if the final value slips.
Paper 1/2 multiple choice: wrong options often come from a time left in minutes or from dividing instead of multiplying. Check the unit of each option too: energy is in J, power in W.
"Define" the kilowatt-hour in words: the energy transferred by a 1kW appliance in 1 hour. Then you can add that it equals 3.6MJ.
Key takeaways
Learn thisA circuit transfers energy from its source (a cell or the mains) to its components, and they transfer it to the surroundings. The current is not used up; the energy ends up spread out in the surroundings.
Learn thisP=IV(power in W, current in A, p.d. in V)
Learn thisE=IVt(energy in J, with the time in s)
Learn thisWhen a steady power is given, the energy transferred is E=Pt. With P in W and t in s, E is in J.
Learn thisOne kilowatt-hour is the energy transferred by a 1kW appliance in 1 hour: 1kW h=3.6×106J. It is a unit of energy, not power.
Learn thisCost of electricity: energy in kW h (power in kW × time in hours) × price per kW h.
Practise this
14 past-paper questions on Electrical energy and electrical power in the 0625 Extended bank, each with a mark scheme and a worked explanation.