4.1 · CorePaper 1Paper 2Paper 3Paper 4

Simple phenomena of magnetism

Builds on 1.5.1 Effects of forces26 min read

In a minute

A has a north pole and a south pole: like poles repel and unlike poles attract. A magnet also attracts iron and steel by making them into magnets. Around every magnet is a , which you can map with a compass or iron filings.

You'll be able to

  • Say how push and pull on each other and on magnetic materials, using attract, repel, magnetised and unmagnetised, and tell magnetic from non-magnetic materials.
  • Describe , and compare soft iron () with steel ().
  • Describe uses of permanent magnets and .
  • Describe a magnetic field, say how its direction is defined, and draw the field around a bar magnet.
  • Map a field using a plotting compass or iron filings, and find its direction with a compass.
  • Explain magnetic as fields interacting, and judge field strength from line spacing.
Before you start2 quick questions on what this builds on
Check yourself
What is the unit of force?
Check yourself
A force acts on an object. Which of these can it NOT do?

Revise first: 1.5.1 Effects of forces

Poles, attraction and repulsion

Hang a bar magnet from a thread and it turns to lie north–south. The end that points north is the north pole (N pole); the other end is the south pole (S pole).

Like poles (N and N, or S and S) repel: they push apart. Unlike poles (N and S) attract. Magnets do this without touching.

Magnetic materials are attracted by a magnet and can be made into magnets: iron, steel, nickel and cobalt. Non-magnetic materials, such as copper, aluminium, plastic and wood, are not attracted and cannot be magnetised.

Magnetic material that is not acting as a magnet is unmagnetised, and a magnet attracts it at either pole. Once made into a magnet, it is magnetised, with its own N and S poles.

Worked examplePriya has a steel needle and a bar magnet with labelled poles. Describe how she could test whether the needle is magnetised.

Try it first, then reveal one step at a time.

  1. Find the result only a magnet can give. Test both ends of the needle with both poles.
Check yourself
The S pole of one bar magnet is pushed towards the S pole of another. What happens?
Check yourself
Which object would be attracted by a magnet?

Induced magnetism: soft iron and steel

Why does a magnet attract an unmagnetised iron nail? Near the magnet, the nail becomes a magnet itself: this is .

The end of the nail nearest the magnet becomes the opposite pole, so they attract. Next to an N pole it becomes an S pole; next to an S pole it becomes an N pole.

A bar magnet on the left with its S pole at the left end and its N pole at the right end. To its right, with a small gap, lies an iron nail that was unmagnetised. The end of the nail nearest the magnet is labelled S and its far end, the point, is labelled N. Arrows between the magnet and the nail point towards each other, labelled attract. A note says the end of the nail nearest the N pole becomes an S pole, and unlike poles attract. S N S N unmagnetised iron nail becomes an induced magnet attract bar magnet The end of the nail nearest the N pole becomes an S pole. Unlike poles attract.
The magnet induces an S pole in the near end of the nail, so they attract.

Soft iron is easy to magnetise and loses its magnetism as soon as the magnet is removed. It makes a .

Steel is harder to magnetise, but it keeps its magnetism. It makes a .

Worked exampleA steel paper clip hangs from the N pole of a bar magnet. A second paper clip hangs from the bottom of the first, not touching the magnet. Explain why the second clip does not fall.

Try it first, then reveal one step at a time.

  1. Say what the magnet does to the first clip, then what the first clip does to the second.
Worked exampleA student holds a rod against a strong magnet and counts the paper clips that hang in a chain from it, then removes the magnet and counts again. Rod A holds 9 clips, then 0. Rod B holds 4 clips, then 3. One rod is soft iron and one is steel. Identify each, and explain.

Try it first, then reveal one step at a time.

  1. The count after the magnet is removed shows which rod keeps its magnetism.
Check yourself
Which description fits soft iron?

Permanent magnets and electromagnets in use

An is a coil of wire wound round a soft-iron core. A current in the coil magnetises the core; switch it off and the core loses its magnetism. You will meet the field of a current in 4.5.3.

A permanent magnet gives a field all the time, with no power supply. An electromagnet can be switched on and off, and a bigger current makes it stronger.

Permanent magnets: compass needles, fridge-door seals, cupboard catches, loudspeakers, microphones and electric motors. Electromagnets: scrap-yard lifting magnets, electric door locks, electric bells and relays.

Worked exampleA fire door is held open by an electromagnet in the wall, which attracts a steel plate on the door. When the fire alarm sounds, the current is switched off and the door closes. Explain why an electromagnet with a soft-iron core is used, rather than a permanent magnet or a steel core.

Try it first, then reveal one step at a time.

  1. Say what the magnet must do when the alarm sounds, then why each other choice fails.
Check yourself
Which of these uses a permanent magnet rather than an electromagnet?

Magnetic fields and field lines

By agreement, the direction of the at a point is the way an N pole placed there would be pushed. An S pole is pushed the opposite way.

show the field. Outside a magnet each line leaves the N pole, curves round and enters the S pole, with an arrow. The lines never cross, and they are closest together at the poles.

A bar magnet with its N pole on the left and its S pole on the right. Curved field lines leave the N pole, loop round above and below the magnet, and enter the S pole. Arrows on the lines point from N towards S. One straight line leaves the N end pointing left, away from the magnet, and another straight line on the right points left, into the S end. The lines are closest together at the two poles and spread out further away. None of the lines cross. N S Outside the magnet, the field lines run from N to S. They never cross.
The field around a bar magnet. The pattern is the same above and below the magnet.
Worked exampleField lines are drawn round an unlabelled bar magnet. Their arrows point away from end P and into end Q. Which end is the N pole? Explain.

Try it first, then reveal one step at a time.

  1. Recall which way the arrows point near each pole.
Worked exampleAt point K near a magnet, the magnetic field points due east. A tiny magnet is placed at K. State the direction of the force on (a) its N pole and (b) its S pole.

Try it first, then reveal one step at a time.

  1. The field's direction is defined by the force on an N pole; an S pole is pushed the opposite way.
Check yourself
Four small objects are placed in turn at the same point near one pole of a bar magnet. Which one feels a force from the magnet's field?
Check yourself
A bar magnet lies with its N pole on the left. Which way does the field point just above the middle of the magnet?

Plotting field lines

A plotting compass has a tiny magnet for a needle, free to turn. Its N end points along the field where it sits, so it shows the field's direction at that point.

To plot one field line, lay the magnet on paper:

1. Put the compass near the N pole and mark a dot at the N end of the needle.

2. Move the compass so the S end of its needle is over that dot, and mark a new dot at the N end.

3. Repeat until you reach the S pole. Join the dots with a smooth line and add an arrow from N to S. Start from other points to plot more lines.

A bar magnet with its N pole on the left and S pole on the right. A curved row of dots starts near the N pole, arches over the top of the magnet and ends near the S pole, with a dashed line joining them. Two small plotting compasses sit on the row of dots. Each needle lies along the curve, with its shaded N end pointing the way the row goes, from the N pole towards the S pole. One label points to a compass. Another label says a dot is marked at the N end of the needle. Notes say to move the compass along dot by dot from the N pole to the S pole, then join the dots with a smooth line and add an arrow from N to S. N S plotting compass (N end of needle shaded) dot marked at the N end of the needle Move the compass along, dot by dot, from the N pole to the S pole. Join the dots with a smooth line and add an arrow from N to S.
Plotting a field line, dot by dot, with a plotting compass.

Iron filings show the whole pattern at once. Sprinkle them on paper laid over the magnet and tap gently. Each filing becomes an induced magnet and lines up with the field. Filings show no direction, so use a compass for the arrows.

Worked exampleDescribe how to use a plotting compass to draw one magnetic field line of a bar magnet, including its direction.

Try it first, then reveal one step at a time.

  1. Give the steps in order: start, mark, move, repeat, join, arrow.
Check yourself
Why can iron filings not show the direction of a magnetic field?
Check yourself
A plotting compass sits just beyond the S end of a bar magnet, on the line through the magnet's middle. Which way does the N end of its needle point?

Field strength and forces between fields Extended only

The spacing of field lines shows how strong the field is. Close lines mean a strong field; widely spaced lines mean a weak one. Around a bar magnet, the field is strongest at the poles.

Check yourself
On a field-line diagram, the lines near point L are much closer together than the lines near point M. Which statement is correct?

Magnets push and pull without touching because each has its own field. When two magnets are close, their fields overlap and combine: the force comes from this interaction.

Two diagrams side by side. Left: two bar magnets in a line, the N pole of the first facing the S pole of the second across a small gap. Field lines run straight across the gap from the N pole to the S pole, close together, with arrows pointing from N to S. Two more lines bulge slightly above and below the gap. A label says the lines join across the gap, and the heading says unlike poles facing attract. Right: two bar magnets with their N poles facing each other across a gap. Field lines leave each N pole, go into the gap, then turn sharply up or down, away from each other, with arrows pointing up and down away from the magnets. The lines from the two magnets never meet. At the centre of the gap is a point X with no field lines. A label says the lines push apart and there is no field at X, and the heading says like poles facing repel. unlike poles facing: attract S N S N lines join across the gap like poles facing: repel S N N S X lines push apart; no field at X
Combined fields of two magnets. The lines join between unlike poles and push apart between like poles.

Between unlike poles, lines run from one magnet into the other, and the magnets attract. Between like poles, the lines turn away from each other, and the magnets repel. At X the fields cancel.

A magnet attracts iron in the same way: its field induces magnetism in the iron, and the iron's field interacts with the magnet's.

Worked exampleTwo bar magnets lie end to end with the N pole of one facing the S pole of the other, a short gap apart. Explain, in terms of magnetic fields, why they attract.

Try it first, then reveal one step at a time.

  1. Say that each magnet has a field, how the fields combine, and what the lines do in the gap.

Common mistakes

  • Saying a magnet attracts all metals. Only magnetic materials (iron, steel, nickel, cobalt) are attracted.
  • Taking attraction as proof of a magnet. Unmagnetised iron is attracted too: test for repulsion.
  • Choosing steel for an electromagnet's core. Steel stays magnetised when the current stops; use soft iron.
  • Drawing field-line arrows from S to N, or labelling the poles backwards. The arrows point away from N and into S.

Exam tips

  • "Explain" why iron is attracted to a magnet: magnetism is induced in it, the near end becomes the opposite pole, and unlike poles attract.
  • "State" the field's direction: the direction of the force on an N pole. Saying "on a magnet" does not name the pole.

Key takeaways

Learn thisLike poles repel; unlike poles attract. A magnet attracts unmagnetised magnetic materials at either pole, so only repulsion proves an object is a magnet.
Learn thisMagnetic materials (iron, steel, nickel, cobalt) are attracted by a magnet and can be magnetised. Non-magnetic materials, including copper and aluminium, are not.
Learn thisInduced magnetism: a magnetic material near a magnet becomes a magnet, with the opposite pole at the end nearest the magnet's pole.
Learn thisSoft iron is easy to magnetise and loses its magnetism easily (temporary magnets, electromagnet cores). Steel is harder to magnetise but keeps its magnetism (permanent magnets).
Learn thisA magnetic field is a region where any magnetic pole feels a force. Its direction is the direction of the force an N pole would feel there.
Learn thisOutside a bar magnet, field lines run from N to S, never cross, and crowd together at the poles. Plot them with a compass, or show the pattern with iron filings.
Learn thisThe closer together the field lines, the stronger the field. Magnetic forces come from the interaction between magnetic fields.

Practise this

66 past-paper questions on Simple phenomena of magnetism in the 0625 Extended bank, each with a mark scheme and a worked explanation.

Practise Simple phenomena of magnetism →