4.2.2 · CorePaper 1Paper 2Paper 3Paper 4Paper 5Paper 6

Electric current

In a minute

An is a flow of charge. In a metal wire the charge is carried by drifting along the wire. You measure current in amperes with an : a cell gives a current that flows one way only, while the mains supply's current keeps reversing.

You'll be able to

  • Say what an electric current is, and describe how a metal conducts using its free electrons.
  • Use analogue and digital ammeters: connect them in series, choose a suitable range and read the scale.
  • Tell (d.c.) from (a.c.).
  • Define current as charge per unit time, and use I=QtI = \frac{Q}{t}.
  • State which way and the free electrons flow round a circuit.
Before you start3 quick questions on what this builds on
Check yourself
What type of charge does an carry?
Check yourself
Which of these materials is a good ?
Check yourself
A source makes 120 complete vibrations in 3.0 s3.0\ \text{s}. What is its ?

Revise first: 1.1 Physical quantities and measurement techniques, 2.3.1 Conduction, 3.1 General properties of waves and 4.2.1 Electric charge

Current is a flow of charge

An is a flow of . Whenever charge moves round a circuit, there is a current. The more charge that flows past a point each second, the bigger the current.

Current is measured in amperes (A), often called amps. Small currents are given in milliamperes (mA): 1 mA=0.001 A1\ \text{mA} = 0.001\ \text{A}.

A metal is made of positive ions in fixed positions, with moving in the gaps between them. A free is not tied to any one atom. The ions can only vibrate where they are.

A short piece of metal wire drawn as a long box. Inside are rows of large circles marked plus, the positive ions, in fixed positions. Small circles marked minus, the free electrons, sit in the gaps between them. An arrow below the wire shows the free electrons drifting along the wire from left to right. + + + + + + + + + + + + + + + + + + + + + positive ion: stays in place, only vibrates free electron the free electrons drift along the wire: this flow of charge is the current
Only the free electrons move along the wire. The positive ions stay where they are.

Connect the wire to a cell and the free electrons drift along it, all in the same overall direction. This flow of charge is the current.

This is why metals are good : they have charges that are free to move. Insulators such as plastic have no free electrons, so charge cannot flow through them.

Worked exampleDescribe how a metal wire conducts electricity when it is connected to a battery.

Try it first, then reveal one step at a time.

  1. Say what is inside the metal that can move.
Check yourself
There is a current in a copper wire. What do the positive ions in the copper do?
Check yourself
Which of these is a unit of electric current?

Measuring current with an ammeter

An measures current. It is connected in series: break the circuit and put the ammeter in the gap, so the current you want to measure passes through it. Its circuit symbol is a circle with the letter A.

An ammeter has a very small resistance, so it hardly changes the current it measures.

A digital ammeter shows the current as a number. An analogue ammeter has a pointer that moves over a scale, and you read the value yourself.

Most ammeters have several ranges, such as 0–200 mA, 0–2 A and 0–20 A. The range is the largest current the meter can show on that setting. Choose the smallest range that is still bigger than the current you expect: it gives the most precise reading.

If you have no idea how big the current is, start on the largest range, then switch down. A current bigger than the range can damage the meter.

To read an analogue scale, first work out what one small division is worth. Then count divisions from the labelled mark below the pointer. If the pointer is between two marks, read to the nearest half division.

Look straight at the pointer, not from one side, to avoid a parallax error. Before you switch on, check that the pointer starts at zero.

The scale of an analogue ammeter, marked A. The scale runs from 0 to 1.0 with labels at 0, 0.2, 0.4, 0.6, 0.8 and 1.0. There are four small divisions between each pair of labels. The pointer lies on the third small mark after 0.6. 0 0.2 0.4 0.6 0.8 1.0 A
An analogue ammeter on its 0–1.0 A range.
Worked exampleThe analogue ammeter in the figure is on its 0–1.0 A range. State the current it shows.

Try it first, then reveal one step at a time.

  1. Between two labelled marks, such as 0.60.6 and 0.80.8, the scale goes up by 0.2 A0.2\ \text{A}.
Worked exampleA student expects the current in a small motor to be about 0.4 A0.4\ \text{A}. Her digital ammeter has three ranges: 0–200 mA, 0–2 A and 0–20 A. Which range should she use? Explain your choice.

Try it first, then reveal one step at a time.

  1. Put the expected current in the same unit as the smallest range: 0.4 A=400 mA0.4\ \text{A} = 400\ \text{mA}.
Check yourself
Which meter measures the current in a lamp, and how is it connected?
Check yourself
A digital ammeter on its 0–200 mA range shows 36.5. What is the current in amperes?

Direct and alternating current

With (d.c.), charge flows round the circuit in one direction only. Cells, batteries and solar cells give d.c.

With (a.c.), the current keeps reversing: it flows one way, then the other way, many times each second. The mains supply in homes is a.c.

Three graphs of current against time. First, steady d.c.: a horizontal line above the time axis. Second, varying d.c.: a wavy line that rises and falls but always stays above the time axis. Third, a.c.: a smooth wave that goes above the time axis, then below it, again and again, so the current keeps reversing direction. current time steady d.c. 0 current time varying d.c. 0 current time a.c. 0
Above the time axis is one direction and below it is the other. Only the a.c. graph crosses the axis.

What decides d.c. or a.c. is the direction, not the size. A current that rises and falls but never reverses is still d.c.

The of an a.c. supply is the number of complete cycles each second, in hertz (Hz). In one cycle the current flows one way, then back the other way. Mains supplies are 50 Hz in many countries and 60 Hz in some.

Worked exampleA graph of the current from a power supply against time shows the current rising and falling between 0.3 A0.3\ \text{A} and 0.7 A0.7\ \text{A}. State whether this is d.c. or a.c. Explain your answer.

Try it first, then reveal one step at a time.

  1. Look at the sign of the current: it stays above zero the whole time.
Check yourself
Which of these supplies gives an alternating current?
Check yourself
A mains supply has a frequency of 60 Hz. What does this tell you?

Current as charge per second, and its direction Extended only

Learn this
I=QtI = \frac{Q}{t}

Here II is the current in amperes (A), QQ is the charge in (C) and tt is the time in seconds (s). So 1 A1\ \text{A} is a flow of 1 C1\ \text{C} each second.

Rearranged, Q=ItQ = It and t=QIt = \frac{Q}{I}. Convert minutes and hours to seconds, and mA to A, before you substitute.

Worked exampleA charge of 84 C84\ \text{C} flows through a kettle's heating element in 12 s12\ \text{s}. Calculate the current in the element.

Try it first, then reveal one step at a time.

  1. Write the equation: I=QtI = \frac{Q}{t}.
Worked exampleA lamp carries a current of 250 mA250\ \text{mA} for 4.04.0 minutes. Calculate the charge that passes through the lamp.

Try it first, then reveal one step at a time.

  1. Convert to amperes and seconds: 250 mA=0.25 A250\ \text{mA} = 0.25\ \text{A} and 4.0×60=240 s4.0 \times 60 = 240\ \text{s}.
Check yourself
A current of 2.5 A2.5\ \text{A} flows in a circuit. How long does it take for 150 C150\ \text{C} of charge to pass a point?
Check yourself
A current of 1.6 A1.6\ \text{A} flows for 45 s45\ \text{s}. How much charge passes, in C?

Scientists chose a direction for current before electrons were discovered. They took current to leave the supply at its + terminal, go round the circuit and return to the − terminal. This is , and circuit diagrams still use it.

A cell and a lamp joined in a single loop. The cell is in the top wire with its positive terminal on the left and its negative terminal on the right. Outside the loop, an arrow labelled conventional current leaves the positive terminal and goes anticlockwise round the circuit: left along the top, down the left side, along the bottom through the lamp and up the right side to the negative terminal. Inside the loop, an arrow labelled electron flow goes the opposite way, clockwise, from the negative terminal round to the positive terminal. +− celllamp conventional current conventional current electron flow: from − round to + conventional current: from + round to −
Round the circuit outside the cell, conventional current flows from + to −. The free electrons flow the other way.
Check yourself
A cell is connected to a resistor. Which way do the free electrons flow through the resistor?

Common mistakes

  • Saying that protons or positive ions carry the current along a metal. The ions keep their places; only the free electrons move along.
  • Using a voltmeter to measure current, or connecting the ammeter in parallel. An ammeter measures current and goes in series.
  • Reading an analogue scale without working out what one small division is worth, or reading it from the side. Find the division value first and look straight at the pointer.
  • Calling a current a.c. just because its size changes. It is a.c. only if its direction keeps reversing.
  • Extended: putting minutes or milliamperes straight into I=QtI = \frac{Q}{t}. Convert to seconds and amperes first.
  • Extended: drawing the electron flow the same way as conventional current. Electrons flow from − to +, the opposite way.

Exam tips

  • "Describe" how a metal conducts: name the free electrons, say they drift along the wire, and say the positive ions stay in fixed positions.
  • "State" which meter measures current and how it is connected: an ammeter, in series. Naming a voltmeter, or putting the ammeter in parallel, is wrong.
  • "Define" current (Extended): the charge that passes a point per unit time. The equation I=QtI = \frac{Q}{t} alone counts only if you say what II, QQ and tt stand for.
  • "Calculate" with I=QtI = \frac{Q}{t} (Extended): write the equation, substitute in coulombs and seconds, then give the answer with its unit.

Key takeaways

Learn thisElectric current is a flow of charge, measured in amperes (A). 1 mA=0.001 A1\ \text{mA} = 0.001\ \text{A}.
Learn thisIn a metal, the current is free electrons drifting along the wire. The positive ions stay in place and only vibrate.
Learn thisAn ammeter measures current and is connected in series. Choose the smallest range bigger than the expected current; if you can't estimate it, start on the largest range.
Learn thisd.c. flows in one direction only (cells, batteries). a.c. keeps reversing direction (mains supply). A current that changes size but never reverses is still d.c.
Learn thisI=QtI = \frac{Q}{t}
Learn thisCurrent is the charge that passes a point each second. Round the circuit outside the supply, conventional current flows from + to −, and free electrons flow from − to +.

Practise this

26 past-paper questions on Electric current in the 0625 Extended bank, each with a mark scheme and a worked explanation.

Practise Electric current →