IB Maths AA notes › Glossary
Glossary
Key terms in plain words, with the lesson that teaches each one.
6
- 68–95–99.7 rule
- For a normal distribution, about , and of values lie within one, two and three standard deviations of the mean.Taught in 4.9 Normal distribution
A
- acceleration
- The rate of change of velocity, .Taught in 5.9 Kinematics
- addition principle
- If a task is done in one of two separate cases that cannot both happen, with ways and ways, there are ways in total.Taught in 1.10 Counting principles and the extended binomial theorem
- ambiguous case
- When two sides of a triangle and an angle not between them are known, the sine rule can give an acute and an obtuse angle, so two different triangles may fit.Taught in 3.5 Unit-circle trigonometry and exact values
- amplitude
- Half the difference between the maximum and minimum values of a sine or cosine wave; for it is .Taught in 3.7 Circular functions, graphs and transformations
- analytic solution
- A solution found exactly by algebra, such as , rather than read from a graph or a calculator.Taught in 2.10 Solving equations graphically and analytically
- angle between a line and a plane
- The angle between the line and its projection on the plane: the line from where it meets the plane to the foot of a perpendicular dropped from it.Taught in 3.1 3D distance, midpoint and measurement
- angle between two lines
- The acute or right angle between two lines, found from their direction vectors by .Taught in 3.14 Vector equations of lines
- angle between two planes
- The acute angle between the planes' normal vectors, which is the angle you see between the planes when you look along their line of intersection.Taught in 3.18 Intersections and angles of lines and planes
- angle of depression
- The angle you look down through from the horizontal to see an object below you.Taught in 3.3 Applied triangle trigonometry
- angle of elevation
- The angle you look up through from the horizontal to see an object above you.Taught in 3.3 Applied triangle trigonometry
- antiderivative
- A function whose derivative is the given function: is an antiderivative of when .Taught in 5.5 Antidifferentiation, definite integrals and area
- arc
- The part of a circle's circumference between two points on it.Taught in 3.4 Radians, arc length and sector area
- Argand diagram
- A plane with a horizontal real axis and a vertical imaginary axis, where is the point ; also called the complex plane.Taught in 1.12 Complex numbers and the Argand diagram
- argument of a complex number
- The angle from the positive real axis to the line from the origin to , in radians, usually with .Taught in 1.12 Complex numbers and the Argand diagram
- arithmetic sequence
- A sequence in which you add the same number each time to get from one term to the next.Taught in 1.2 Arithmetic sequences and series
- asymptote
- A straight line that a graph gets closer and closer to as or becomes very large in size, such as for .Taught in 2.3 Graphs of functions
- augmented matrix
- A grid holding the coefficients of each equation in a linear system, one row per equation, with the right-hand sides in a final column after a bar.Taught in 1.16 Systems of linear equations
- axis of symmetry
- A line that a graph can be folded along so that its two halves match; for a parabola, the vertical line through its vertex.Taught in 2.4 Key features of graphs
B
- back bearing
- The bearing of the return journey: if is on bearing from , then is on bearing from .Taught in 3.3 Applied triangle trigonometry
- base vectors
- The unit vectors , and along the -, - and -axes, so that .Taught in 3.12 Vectors in 2D and 3D
- Bayes' theorem
- A formula that turns a conditional probability round: it finds from and the chances of on every first-stage branch.Taught in 4.13 Bayes’ theorem
- bearing
- A direction given as the angle measured clockwise from north, written with three figures before any decimal point, such as or .Taught in 3.3 Applied triangle trigonometry
- binomial coefficient
- The number : the number of ways to choose objects from , and the coefficient of in .Taught in 1.9 Binomial theorem
- binomial distribution
- The distribution of the number of successes in independent trials that each succeed with the same probability , written .Taught in 4.8 Binomial distribution
- binomial theorem
- The rule that expands , for , as the sum of the terms for .Taught in 1.9 Binomial theorem
- bivariate data
- Data made of pairs of values: two measurements taken from each member of a sample, such as the age and price of each car.Taught in 4.4 Correlation and regression (y on x)
- boundary condition
- A known value, such as when , used to find the constant of integration.Taught in 5.5 Antidifferentiation, definite integrals and area
- box and whisker diagram
- A diagram of a data set drawn to scale, with a box from the lower to the upper quartile, a line at the median, whiskers to the most extreme values that are not outliers, and a cross for each outlier.Taught in 4.2 Data presentation
C
- Cartesian equation of a plane
- An equation satisfied by exactly the points of a plane, where is a normal to the plane.Taught in 3.17 Vector equations of planes
- Cartesian equations of a line
- The equations of the line through with direction , found by removing from the parametric equations.Taught in 3.14 Vector equations of lines
- Cartesian form
- The way of writing a complex number as , real part first, with .Taught in 1.12 Complex numbers and the Argand diagram
- causation
- A link in which a change in one variable directly produces a change in another.Taught in 4.4 Correlation and regression (y on x)
- chain rule
- The rule for differentiating a composite function: , the outside's derivative times the inside's.Taught in 5.6 Differentiation rules and standard functions
- change of base
- Rewriting a logarithm in another base with , for example to work out as on a calculator.Taught in 1.7 Rational exponents and logarithm laws
- chord
- A straight line joining two points on a curve. It is also called a secant.Taught in 5.1 Limits and the derivative as a rate of change
- chord of a circle
- A straight line segment joining two points on a circle.Taught in 3.4 Radians, arc length and sector area
- class interval
- A group of values in a grouped frequency table, written as an inequality such as , so that every value falls in exactly one class.Taught in 4.2 Data presentation
- coincident lines
- Two descriptions of the same line, so every point is shared: the direction vectors are multiples of each other and a point of one line lies on the other.Taught in 3.15 Relationships between lines
- collinear
- Lying on one straight line; points A, B and C are collinear when for some scalar .Taught in 3.12 Vectors in 2D and 3D
- combination
- A selection of objects from different objects, where the order does not matter; there are of them.Taught in 1.10 Counting principles and the extended binomial theorem
- common difference
- The fixed amount added to each term of an arithmetic sequence to get the next one, so .Taught in 1.2 Arithmetic sequences and series
- common ratio
- The fixed number that each term of a geometric sequence is multiplied by to give the next, found as .Taught in 1.3 Geometric sequences and series
- comparing coefficients
- Matching the coefficient of each power of on the two sides of an identity, to get equations for unknown constants.Taught in 1.11 Partial fractions
- complementary angles
- Two angles that add up to , or ; the sine of each is the cosine of the other.Taught in 3.11 Trigonometric-function relationships and symmetry
- complementary events
- An event and the event (not ), which holds every outcome in that is not in ; exactly one of them happens, so .Taught in 4.5 Probability foundations and expected value
- completing the square
- Rewriting as , which turns a quadratic into the vertex form .Taught in 2.6 Quadratic functions
- complex conjugate
- For , the number : the reflection of in the real axis.Taught in 1.12 Complex numbers and the Argand diagram
- complex number
- A number , where and .Taught in 1.12 Complex numbers and the Argand diagram
- composite function
- A function made by applying one function to the output of another: , where acts first.Taught in 2.5 Composite and inverse functions
- compound angle identity
- An identity that writes the sine, cosine or tangent of or in terms of the ratios of and , such as .Taught in 3.10 Compound-angle identities
- compound interest
- Interest that is added to an investment and then earns interest itself, so at a rate of per cent the value is multiplied by each period.Taught in 1.4 Financial applications of geometric sequences
- concave-down
- Bending downwards like an upside-down cup on an interval: the gradient decreases as increases there, as it does wherever .Taught in 5.7 Second derivative and concavity
- concave-up
- Bending upwards like a cup on an interval: the gradient increases as increases there, as it does wherever .Taught in 5.7 Second derivative and concavity
- conditional probability
- The probability that happens given that has happened, found as .Taught in 4.6 Probability diagrams, rules and independence
- conjugate pair
- Two complex numbers and , with and : each is the complex conjugate of the other.Taught in 1.14 Complex roots and De Moivre’s theorem
- constant of integration
- The at the end of an indefinite integral, there because any constant differentiates to .Taught in 5.5 Antidifferentiation, definite integrals and area
- constant term
- The term of an expression with no power of the variable in it, that is, the term in .Taught in 1.9 Binomial theorem
- continuous
- A function is continuous at if exists and : near its graph has no break or jump.Taught in 5.12 Continuity, limits and higher derivatives
- continuous data
- Data that is measured and can take any value in a range, such as a time, a mass or a length.Taught in 4.1 Sampling, data quality and outliers
- continuous random variable
- A random variable that can take any value in an interval, such as a time or a mass; its probabilities are areas under a curve, so for any single value .Taught in 4.9 Normal distribution
- convenience sampling
- Taking the members of the population that are easiest to reach, such as the first people to arrive.Taught in 4.1 Sampling, data quality and outliers
- convergent
- A sequence or series is convergent if its terms (or its partial sums) settle on one finite value as .Taught in 1.8 Infinite geometric series
- correlation
- How closely the points of a scatter diagram follow a straight line, and whether that line slopes up (positive) or down (negative).Taught in 4.4 Correlation and regression (y on x)
- cosine rule
- In any triangle , , which links all three sides and one angle.Taught in 3.2 Triangle trigonometry
- counterexample
- A particular case for which a statement is false, which shows that the statement is not always true.Taught in 1.15 Proof by induction, contradiction and counterexample
- critical value
- A boundary value used to solve an inequality: a value where the two sides are equal, such as or for , or where a vertical asymptote splits the number line.Taught in 2.7 Quadratic equations and inequalities
- critical value of r
- The value that must exceed, for a given number of data pairs, before the linear correlation counts as significant rather than possibly due to chance.Taught in 4.4 Correlation and regression (y on x)
- cumulative frequency
- The number of data values less than or equal to a given value: the running total of the frequencies.Taught in 4.2 Data presentation
- cusp
- A sharp point on a graph where the curve suddenly changes direction, so it has no single tangent there.Taught in 2.16 Modulus and related graph transformations
D
- De Moivre's theorem
- For an integer , : raise the modulus to the power and multiply the argument by .Taught in 1.14 Complex roots and De Moivre’s theorem
- decreasing function
- A function whose value goes down as goes up on an interval, so gives .Taught in 5.2 Increasing and decreasing functions
- deductive proof
- An argument that starts from known facts and reaches a result through logical steps, each following from the ones before, so the result holds in every case.Taught in 1.6 Elementary deductive proof
- definite integral
- An integral with limits, . Its value is a number, not a function.Taught in 5.5 Antidifferentiation, definite integrals and area
- degree of a polynomial
- The highest power of with a non-zero coefficient; has degree .Taught in 2.12 Polynomial functions
- depreciation
- A loss of value over time; at a rate of per cent a year the value is multiplied by each year.Taught in 1.4 Financial applications of geometric sequences
- derivative
- The gradient function , or : the gradient of at each , and the rate of change of with respect to .Taught in 5.1 Limits and the derivative as a rate of change
- differentiable
- A function is differentiable at if its derivative exists there: the graph is smooth at that point, with one tangent and no corner.Taught in 5.12 Continuity, limits and higher derivatives
- differential equation
- An equation that contains a derivative, such as ; solving it means finding the function.Taught in 5.18 First-order differential equations
- direction vector
- A non-zero vector parallel to a line, so that any non-zero multiple of it is also a direction vector of the same line.Taught in 3.14 Vector equations of lines
- discrete data
- Data that can take only separate values, usually counts, such as the number of goals in a match.Taught in 4.1 Sampling, data quality and outliers
- discrete random variable
- A random variable whose possible values can be listed, such as .Taught in 4.7 Discrete random variables and expected value
- discriminant
- The number for the quadratic ; its sign tells you whether there are two distinct, two equal or no real roots.Taught in 2.7 Quadratic equations and inequalities
- disguised quadratic
- An equation that becomes a quadratic after a substitution, such as turning into .Taught in 2.10 Solving equations graphically and analytically
- dispersion
- How spread out a data set is, measured by the range, the interquartile range or the standard deviation.Taught in 4.3 Central tendency and dispersion
- displacement
- The position of a particle measured from a fixed point O on its line of motion, with a sign: means it is on the negative side of O.Taught in 5.9 Kinematics
- displacement vector
- A vector describing the move from one point to another, such as .Taught in 3.12 Vectors in 2D and 3D
- distance travelled
- The total length of path a particle covers, counting motion in both directions as positive: .Taught in 5.9 Kinematics
- divergent
- A sequence or series is divergent if it does not converge: its values grow without limit or never settle on one value.Taught in 1.8 Infinite geometric series
- domain
- The set of input values for which a function is defined.Taught in 2.2 Function concepts, domain and range
- double angle identity
- An identity that writes a ratio of in terms of ratios of , such as or .Taught in 3.6 Trigonometric identities
E
- equally likely outcomes
- Outcomes that each have the same chance of happening, as with a fair die or a person chosen at random.Taught in 4.5 Probability foundations and expected value
- Euler form
- A complex number written as , where is its modulus and its argument; the polar form written as a power of .Taught in 1.13 Complex numbers in polar form
- Euler's method
- A numerical method that estimates a solution of by repeated short steps along the tangent.Taught in 5.18 First-order differential equations
- even function
- A function with for every in its domain, so its graph is symmetric in the -axis.Taught in 2.14 Odd, even and inverse functions
- event
- A set of outcomes from the sample space, such as rolling an even number; it happens when the outcome of the trial is in the set.Taught in 4.5 Probability foundations and expected value
- expected value
- The long-run mean of a random variable, for a discrete .Taught in 4.7 Discrete random variables and expected value
- exponent
- The raised number in a power , also called the index or power; for a positive integer it counts how many copies of the base are multiplied together.Taught in 1.5 Exponents and introductory logarithms
- exponential equation
- An equation with the unknown in an exponent, such as ; you solve it by writing both sides with the same base or by taking logarithms of both sides.Taught in 1.7 Rational exponents and logarithm laws
- exponential function
- A function , where and : the variable is in the power, so equal steps in multiply the output by the same factor.Taught in 2.9 Exponential and logarithmic functions
- extrapolation
- Using a model to predict a value for an outside the range of the data the model was built from, which may be unreliable.Taught in 4.4 Correlation and regression (y on x)
F
- factor theorem
- is a factor of a polynomial exactly when .Taught in 2.12 Polynomial functions
- factorial
- For a whole number , is the product ; by definition .Taught in 1.9 Binomial theorem
- fair game
- A game in which the expected gain of a player is , so where is the player's gain.Taught in 4.7 Discrete random variables and expected value
- family of curves
- All the curves given by one indefinite integral: the same shape, shifted up or down by different constants .Taught in 5.15 Extended differentiation and integration
- first principles
- Finding a derivative straight from its definition, , without the differentiation rules.Taught in 5.12 Continuity, limits and higher derivatives
- five-number summary
- The smallest value, lower quartile, median, upper quartile and largest value of a data set.Taught in 4.2 Data presentation
- frequency
- The number of times a value, or a value inside a class, occurs in a data set.Taught in 4.2 Data presentation
- frequency table
- A table that lists each value, or each class of values, beside the number of times it occurs.Taught in 4.2 Data presentation
- function
- A rule that gives exactly one output for each input in its domain.Taught in 2.2 Function concepts, domain and range
- fundamental theorem of calculus
- The result , where is any antiderivative of : integration and differentiation undo each other.Taught in 5.11 Definite integrals and areas
- future value
- The value of an investment or item at a later time, written .Taught in 1.4 Financial applications of geometric sequences
G
- general form of a line
- A line's equation written with every term on one side, .Taught in 2.1 Straight-line equations
- general solution
- The family of all solutions of a differential equation, written with an arbitrary constant.Taught in 5.18 First-order differential equations
- general solution (of a linear system)
- Every solution of a linear system with infinitely many solutions, written with each unknown in terms of parameters such as , one for each free unknown.Taught in 1.16 Systems of linear equations
- geometric sequence
- A sequence in which each term is the one before multiplied by the same non-zero number, such as Taught in 1.3 Geometric sequences and series
- geometric series
- The sum of the terms of a geometric sequence, such as Taught in 1.3 Geometric sequences and series
- gradient
- How steep a straight line is: the change in divided by the change in between any two points on it, written .Taught in 2.1 Straight-line equations
H
- half-turn symmetry
- A graph has half-turn symmetry about a point if turning it through about leaves it unchanged.Taught in 3.11 Trigonometric-function relationships and symmetry
- hemisphere
- Half of a sphere, cut through its centre; a solid hemisphere has a curved surface and a flat circular face.Taught in 3.1 3D distance, midpoint and measurement
- higher derivative
- A derivative found by differentiating more than once; the th derivative is written or .Taught in 5.12 Continuity, limits and higher derivatives
- histogram
- A diagram for grouped data with one bar per class on a continuous scale; with equal class widths, each bar's height is the class frequency and neighbouring bars touch.Taught in 4.2 Data presentation
- homogeneous differential equation
- A first-order differential equation that can be written as , solved with the substitution .Taught in 5.18 First-order differential equations
- horizontal stretch
- The transformation , which multiplies every -coordinate by the scale factor and keeps every -coordinate.Taught in 2.11 Transformations of graphs
- hypotenuse
- The longest side of a right-angled triangle: the side opposite the right angle.Taught in 3.2 Triangle trigonometry
I
- identity
- A statement that two expressions are equal for every value of their variables, written with , such as .Taught in 1.6 Elementary deductive proof
- identity function
- The function , which maps every value to itself.Taught in 2.5 Composite and inverse functions
- imaginary part
- For with and real, the real number that multiplies .Taught in 1.12 Complex numbers and the Argand diagram
- implicit differentiation
- Finding from an implicit equation by differentiating every term with respect to , multiplying each derivative of a term by .Taught in 5.14 Implicit differentiation, related rates and optimisation
- implicit equation
- An equation that links and without giving on its own as a function of , such as .Taught in 5.14 Implicit differentiation, related rates and optimisation
- included angle
- The angle between two given sides of a triangle, at the corner where they meet.Taught in 3.2 Triangle trigonometry
- inconsistent system
- A system of equations with no solution; row reduction gives a row that says with .Taught in 1.16 Systems of linear equations
- increasing function
- A function whose value goes up as goes up on an interval, so gives .Taught in 5.2 Increasing and decreasing functions
- independent events
- Events where one happening does not change the probability of the other, so .Taught in 4.6 Probability diagrams, rules and independence
- indeterminate form
- A limit of a fraction whose top and bottom both tend to 0, written , or both tend to , written , so the form alone does not give the value.Taught in 5.13 Evaluating limits
- inflation
- The general rise in prices over time, given as a percentage per year.Taught in 1.4 Financial applications of geometric sequences
- integrand
- The function being integrated: in it is .Taught in 5.5 Antidifferentiation, definite integrals and area
- integrating factor
- The multiplier that turns the left side of into the derivative of one product.Taught in 5.18 First-order differential equations
- integration by inspection
- Integrating by spotting the answer: guess a function whose derivative is the integrand, often by reversing the chain rule, then differentiate the guess and fix any constant factor.Taught in 5.10 Indefinite integration and substitution
- integration by parts
- A method for integrating a product that reverses the product rule: .Taught in 5.16 Integration by substitution and parts
- integration by substitution
- Integrating by renaming an inner function as , rewriting the whole integral in terms of , integrating, then putting the original expression back.Taught in 5.10 Indefinite integration and substitution
- interpolation
- Using a model to predict a value for an inside the range of the data the model was built from.Taught in 4.4 Correlation and regression (y on x)
- interquartile range
- The upper quartile minus the lower quartile, : the spread of the middle half of the data.Taught in 4.1 Sampling, data quality and outliers
- intersecting lines
- Two lines with different directions that meet at exactly one point, the point of intersection.Taught in 3.15 Relationships between lines
- intersection
- The event , read " and ": the outcomes that are in both events.Taught in 4.6 Probability diagrams, rules and independence
- invariant point
- A point that a transformation leaves where it is, such as a point on the mirror line of a reflection.Taught in 2.11 Transformations of graphs
- inverse function
- The function that undoes : if , then .Taught in 2.2 Function concepts, domain and range
- inverse normal
- Working back from a probability to a value: finding with when is normal with a given mean and standard deviation.Taught in 4.9 Normal distribution
- inverse trig function
- One of , and : the angle, in a restricted range, whose sine, cosine or tangent is .Taught in 3.9 Reciprocal and inverse trigonometric functions
- irrational number
- A real number that cannot be written as with and , such as or .Taught in 1.15 Proof by induction, contradiction and counterexample
L
- l'Hôpital's rule
- If has the form or , it equals , provided this second limit exists.Taught in 5.13 Evaluating limits
- laws of logarithms
- The rules , and , for and .Taught in 1.7 Rational exponents and logarithm laws
- leading coefficient
- The coefficient of the highest power of in a polynomial; for it is .Taught in 2.12 Polynomial functions
- limit
- The value that gets closer and closer to as approaches , written .Taught in 5.1 Limits and the derivative as a rate of change
- limits of integration
- The numbers and in : is the lower limit and the upper limit.Taught in 5.11 Definite integrals and areas
- line of best fit
- A straight line drawn by eye through the mean point of a scatter diagram, following the trend of the points.Taught in 4.4 Correlation and regression (y on x)
- line of intersection
- The line where two non-parallel planes meet: its points satisfy both plane equations, and its direction is perpendicular to both normals.Taught in 3.18 Intersections and angles of lines and planes
- local maximum
- A point on a graph that is at least as high as every point close to it, like the top of a hill. There for a smooth curve.Taught in 5.8 Extrema, inflexion and optimisation
- local minimum
- A point on a graph that is at least as low as every point close to it, like the bottom of a valley. There for a smooth curve.Taught in 5.8 Extrema, inflexion and optimisation
- logarithm
- is the exponent you raise the base to in order to get , so means (for , , ).Taught in 1.5 Exponents and introductory logarithms
- logarithmic function
- A function , for , where and ; it is the inverse of .Taught in 2.9 Exponential and logarithmic functions
- logistic equation
- The differential equation , with ; a solution that starts between and grows and then levels off towards .Taught in 5.18 First-order differential equations
M
- Maclaurin series
- The never-ending sum in powers of , which matches a function and all its derivatives at .Taught in 5.19 Maclaurin series and deriving expansions
- magnitude of a vector
- The length of a vector, ; it is never negative.Taught in 3.12 Vectors in 2D and 3D
- mathematical induction
- A proof that a statement holds for every positive integer : show is true, then show that true implies true.Taught in 1.15 Proof by induction, contradiction and counterexample
- mathematical model
- A function that describes a real situation, used over a domain the context allows.Taught in 2.2 Function concepts, domain and range
- mean
- The total of the data values divided by how many there are, written .Taught in 4.3 Central tendency and dispersion
- mean point
- The point made from the mean of the values and the mean of the values; lines of best fit and regression lines pass through it.Taught in 4.4 Correlation and regression (y on x)
- median
- The middle value of the data in order; for an even number of values, the mean of the middle two.Taught in 4.3 Central tendency and dispersion
- mid-interval value
- The value halfway along a class, for the class , used to stand for every value in that class.Taught in 4.3 Central tendency and dispersion
- modal class
- For grouped data with equal class widths, the class with the highest frequency.Taught in 4.3 Central tendency and dispersion
- mode
- The value that occurs most often in a data set.Taught in 4.3 Central tendency and dispersion
- modulus
- The modulus of a real number is its distance from : if , and if .Taught in 1.8 Infinite geometric series
- modulus of a complex number
- The distance of from the origin on an Argand diagram, .Taught in 1.12 Complex numbers and the Argand diagram
- multiplicity
- The number of times a factor appears in a polynomial; a root of multiplicity is a repeated root.Taught in 2.12 Polynomial functions
- mutually exclusive events
- Events that cannot both happen, so .Taught in 4.6 Probability diagrams, rules and independence
N
- natural logarithm
- The logarithm with base , written ; it is the inverse of .Taught in 1.5 Exponents and introductory logarithms
- negative reciprocal
- For a non-zero number , the number : flip the fraction and change its sign.Taught in 2.1 Straight-line equations
- nominal interest rate
- The yearly interest rate a bank quotes before compounding is taken into account; compounded times a year, each period earns per cent.Taught in 1.4 Financial applications of geometric sequences
- normal (to a curve)
- The straight line through a point on a curve that is perpendicular to the tangent at that point.Taught in 5.4 Tangents and normals
- normal distribution
- A continuous probability distribution whose curve is bell-shaped and symmetric about its mean; has mean and variance .Taught in 4.9 Normal distribution
- normal to a plane
- A non-zero vector perpendicular to every vector lying in a plane; any non-zero multiple of it is also a normal.Taught in 3.17 Vector equations of planes
O
- oblique asymptote
- A slanted line , with , that a graph gets closer and closer to as becomes very large in size, such as for .Taught in 2.13 Rational functions
- odd function
- A function with for every in its domain, so its graph looks the same after a half-turn about the origin.Taught in 2.14 Odd, even and inverse functions
- one-to-one
- A function in which no two different inputs give the same output, so it has an inverse.Taught in 2.2 Function concepts, domain and range
- order of magnitude
- The power of 10 that sets a number's size: in standard form it is , and each extra order of magnitude means about 10 times bigger.Taught in 1.1 Standard form and orders of magnitude
- outcome
- One possible result of a trial, such as rolling a .Taught in 4.5 Probability foundations and expected value
- outlier
- A data value more than below the lower quartile or above the upper quartile.Taught in 4.1 Sampling, data quality and outliers
P
- parabola
- The U-shaped curve that is the graph of a quadratic function; it opens upwards when and downwards when .Taught in 2.6 Quadratic functions
- parallel lines
- Two different lines with the same direction, so their direction vectors are multiples of each other and they have no point in common.Taught in 3.15 Relationships between lines
- parallel vectors
- Non-zero vectors where one is a scalar multiple of the other, ; they point the same way if and opposite ways if .Taught in 3.12 Vectors in 2D and 3D
- parameter
- A letter such as that stands for a fixed but unknown number in an equation, as opposed to the variable .Taught in 2.7 Quadratic equations and inequalities
- parametric equations of a line
- The equations , , , which give each coordinate of a point on a line in terms of the parameter .Taught in 3.14 Vector equations of lines
- partial fractions
- Simpler fractions, each over one linear factor, that add up to a given fraction, such as for .Taught in 1.11 Partial fractions
- partial sum
- The sum of the first terms of a series: the running total so far.Taught in 1.8 Infinite geometric series
- particular solution
- The one solution of a differential equation that fits a given condition, such as a known point on the curve.Taught in 5.18 First-order differential equations
- partition
- A set of events, such as , and , where exactly one happens on each trial: they are mutually exclusive and their probabilities add up to .Taught in 4.13 Bayes’ theorem
- Pascal's triangle
- A triangle of numbers in which each row starts and ends with and every other entry is the sum of the two above it; row , counted from row , gives the coefficients of .Taught in 1.9 Binomial theorem
- Pearson's product-moment correlation coefficient
- The number , with , that measures the strength and direction of the linear correlation between two variables.Taught in 4.4 Correlation and regression (y on x)
- percentile
- The th percentile is the value with of the data below it; the median is the 50th percentile.Taught in 4.2 Data presentation
- periodic function
- A function whose graph repeats: there is a constant with for every , and the smallest such is the period.Taught in 3.7 Circular functions, graphs and transformations
- permutation
- An arrangement of objects chosen from different objects, where the order matters; there are of them.Taught in 1.10 Counting principles and the extended binomial theorem
- piecewise function
- A function defined by different formulas on different intervals of its domain, such as for and for .Taught in 4.14 Discrete and continuous random variables
- point of inflexion
- A point where a graph changes between concave-up and concave-down, so and changes sign there.Taught in 5.8 Extrema, inflexion and optimisation
- polar (modulus-argument) form
- A complex number written as , where is its modulus and its argument.Taught in 1.13 Complex numbers in polar form
- polynomial
- An expression in which every power of is a whole number and every coefficient is a constant.Taught in 2.12 Polynomial functions
- population
- The whole group of people or objects that a statistical question is about.Taught in 4.1 Sampling, data quality and outliers
- position vector
- The vector from the origin O to a point A, written ; its components are the coordinates of A.Taught in 3.12 Vectors in 2D and 3D
- power rule
- The rule that the derivative of is : bring the power down as a factor, then lower the power by one.Taught in 5.3 Differentiation of integer-power polynomials
- present value
- The amount invested or owed at the start, written .Taught in 1.4 Financial applications of geometric sequences
- principal axis
- The horizontal line halfway between the maximum and minimum of a sine or cosine wave; for it is .Taught in 3.7 Circular functions, graphs and transformations
- probability density function
- A function with and total area under its graph that describes a continuous random variable: .Taught in 4.14 Discrete and continuous random variables
- probability distribution
- Every value a random variable can take, together with its probability , given as a table or a formula; the probabilities add up to .Taught in 4.7 Discrete random variables and expected value
- product principle
- If a task has stages, with ways to do the first and ways to do the second whatever the first choice was, the whole task can be done in ways.Taught in 1.10 Counting principles and the extended binomial theorem
- product rule
- The rule for differentiating a product: if , then .Taught in 5.6 Differentiation rules and standard functions
- proof by contradiction
- A proof that assumes the statement is false and deduces something impossible, so the statement must be true.Taught in 1.15 Proof by induction, contradiction and counterexample
- proper fraction
- An algebraic fraction whose numerator has a lower degree than its denominator, such as .Taught in 1.11 Partial fractions
- Pythagorean identity
- The identity , true for every angle ; it is Pythagoras' theorem for the point on the unit circle.Taught in 3.6 Trigonometric identities
Q
- quadrant
- One of the four regions the - and -axes split the plane into, numbered first to fourth anticlockwise from the top right.Taught in 3.5 Unit-circle trigonometry and exact values
- quadratic function
- A function of the form , where , so its highest power of is .Taught in 2.6 Quadratic functions
- quartile
- One of the values that cut ordered data into quarters: a quarter of the data lies below the lower quartile , and three quarters below the upper quartile .Taught in 4.3 Central tendency and dispersion
- quota sampling
- Setting how many members to take from each group, then letting the collector choose anyone who fits until each number is reached; the choice is not random.Taught in 4.1 Sampling, data quality and outliers
- quotient rule
- The rule for differentiating a fraction: if , then .Taught in 5.6 Differentiation rules and standard functions
R
- radian
- The angle at the centre of a circle when the arc between the two radii is as long as the radius; radians .Taught in 3.4 Radians, arc length and sector area
- random sample
- A sample chosen so that every member of the population has the same chance of being picked.Taught in 4.1 Sampling, data quality and outliers
- random variable
- A quantity whose value is decided by the outcome of a random trial, named with a capital letter such as .Taught in 4.7 Discrete random variables and expected value
- range
- The set of output values a function takes over its domain.Taught in 2.2 Function concepts, domain and range
- rational exponent
- An exponent that is a fraction: for , , so the denominator gives the root and the numerator gives the power.Taught in 1.7 Rational exponents and logarithm laws
- rational function
- A function written as one polynomial divided by another, such as .Taught in 2.8 Reciprocal and linear-over-linear rational functions
- real part
- For with and real, the real number .Taught in 1.12 Complex numbers and the Argand diagram
- real value
- What a future amount of money is worth in today's prices, after allowing for inflation.Taught in 1.4 Financial applications of geometric sequences
- reciprocal function
- The function , for , which sends each input to its reciprocal; its graph has the axes as asymptotes.Taught in 2.8 Reciprocal and linear-over-linear rational functions
- reciprocal trig function
- One of , and .Taught in 3.9 Reciprocal and inverse trigonometric functions
- reference angle
- The acute angle between the -axis and the line from the origin to the point on the unit circle; it fixes the size of a trig value, while the quadrant fixes its sign.Taught in 3.5 Unit-circle trigonometry and exact values
- reflection
- A transformation that flips a graph over a mirror line, such as the -axis or the -axis.Taught in 2.11 Transformations of graphs
- regression line
- The straight line fitted to bivariate data by least squares; the line of on , , makes the squared vertical distances as small as possible and is used to predict from .Taught in 4.4 Correlation and regression (y on x)
- regression line of x on y
- The least-squares line that makes the squared horizontal distances from the points to the line as small as possible; it is used to predict from a given .Taught in 4.10 Regression line of x on y and prediction
- relative frequency
- The number of times an event happened divided by the number of trials; it estimates the probability of the event.Taught in 4.5 Probability foundations and expected value
- remainder theorem
- When a polynomial is divided by , the remainder is .Taught in 2.12 Polynomial functions
- repeated root
- A root that appears twice, as in ; a quadratic has one when , and its graph touches the -axis there.Taught in 2.7 Quadratic equations and inequalities
- right cone
- A cone whose vertex is directly above the centre of its circular base.Taught in 3.1 3D distance, midpoint and measurement
- right pyramid
- A pyramid whose apex is directly above the centre of its base.Taught in 3.1 3D distance, midpoint and measurement
- right-hand screw rule
- The rule that fixes the direction of : curl the fingers of your right hand from towards and your thumb points along .Taught in 3.16 Vector product
- root
- A value of that makes an equation true; the roots of are the zeros of , where its graph meets the -axis.Taught in 2.7 Quadratic equations and inequalities
- roots of unity
- The solutions of , which are for .Taught in 1.14 Complex roots and De Moivre’s theorem
- row echelon form
- The staircase shape of an augmented matrix in which each row's first non-zero entry lies to the right of the one in the row above, with any rows of zeros last, ready for back-substitution.Taught in 1.16 Systems of linear equations
S
- sample
- The part of a population that data is actually collected from, used to draw conclusions about the whole population.Taught in 4.1 Sampling, data quality and outliers
- sample space
- The set of every possible outcome of a trial, written ; is the number of outcomes in it.Taught in 4.5 Probability foundations and expected value
- sampling bias
- A built-in tendency of a sampling method to pick some kinds of member more often than others, so the sample misrepresents the population.Taught in 4.1 Sampling, data quality and outliers
- scalar
- A quantity with a magnitude only and no direction, such as a mass, a length or a real number that multiplies a vector.Taught in 3.12 Vectors in 2D and 3D
- scalar product
- The number made from two vectors, which also equals , where is the angle between them; also called the dot product.Taught in 3.13 Scalar product and angles
- scatter diagram
- A graph that plots each pair of bivariate data as one point, with one variable on each axis.Taught in 4.4 Correlation and regression (y on x)
- second derivative
- The derivative of the derivative, written or , which measures how fast the gradient is changing.Taught in 5.7 Second derivative and concavity
- sector
- The region of a circle between two radii and the arc joining their ends; the smaller one is the minor sector and the larger one the major sector.Taught in 3.4 Radians, arc length and sector area
- segment of a circle
- The region between a chord of a circle and the arc it cuts off.Taught in 3.4 Radians, arc length and sector area
- self-inverse
- A function is self-inverse if , so applying it twice gives back the input: .Taught in 2.8 Reciprocal and linear-over-linear rational functions
- sequence
- An ordered list of numbers, called terms, where stands for the th term.Taught in 1.2 Arithmetic sequences and series
- series
- The sum of the terms of a sequence; stands for the sum of the first terms.Taught in 1.2 Arithmetic sequences and series
- sheaf (of planes)
- Three or more planes that all pass through one common line, like pages turning about the spine of a book.Taught in 3.18 Intersections and angles of lines and planes
- sigma notation
- A short way to write a sum with the symbol , giving the general term and the first and last values of a counter.Taught in 1.2 Arithmetic sequences and series
- sign diagram
- A number line marked with the critical values of an expression, showing on each piece between them whether the expression is positive () or negative ().Taught in 2.15 Function inequalities
- simple interest
- Interest worked out each period on the original amount only, so the same sum is added every period.Taught in 1.2 Arithmetic sequences and series
- simple random sampling
- Choosing a sample so that every possible group of the required size is equally likely to be picked, for example by drawing numbers at random from a full list.Taught in 4.1 Sampling, data quality and outliers
- sine rule
- In any triangle , , where each side is opposite the angle with the same letter.Taught in 3.2 Triangle trigonometry
- skew lines
- Two lines in three dimensions that are not parallel and have no point in common.Taught in 3.15 Relationships between lines
- skewed distribution
- A distribution that is not symmetric because one side trails off in a long tail: a long tail to the right is positive skew, to the left negative skew.Taught in 4.2 Data presentation
- slant height
- On a right cone, the length from the vertex to the edge of the base along the sloping surface, so .Taught in 3.1 3D distance, midpoint and measurement
- solid of revolution
- The solid swept out when a flat region is rotated through one full turn, radians, about a line such as the -axis or the -axis.Taught in 5.17 Areas and volumes of revolution
- space diagonal
- A line segment joining opposite corners of a cuboid through its inside, rather than across one face.Taught in 3.1 3D distance, midpoint and measurement
- speed
- The magnitude of velocity, : how fast a particle moves, whatever its direction, so it is never negative.Taught in 5.9 Kinematics
- standard deviation
- A measure of the typical distance of the data values from their mean, written ; it is the square root of the variance.Taught in 4.3 Central tendency and dispersion
- standard form
- A way of writing a number as , where and is an integer, for example .Taught in 1.1 Standard form and orders of magnitude
- standard normal distribution
- The normal distribution with mean and standard deviation , written ; standardising any normal variable gives it.Taught in 4.12 Standard normal variables
- stationary point
- A point on a curve where the gradient is zero, , so the tangent is horizontal.Taught in 5.2 Increasing and decreasing functions
- stratified sampling
- Splitting the population into groups by a shared feature, then taking a random sample from each group in proportion to its size.Taught in 4.1 Sampling, data quality and outliers
- sum to infinity
- The finite value that the partial sums of a convergent series get closer and closer to; for a geometric series with it is .Taught in 1.8 Infinite geometric series
- systematic sampling
- Choosing every th member from an ordered list of the population, starting from a randomly chosen member among the first .Taught in 4.1 Sampling, data quality and outliers
T
- tangent
- The straight line that touches a curve at a point and has the same gradient as the curve there, at .Taught in 5.4 Tangents and normals
- transformation
- A rule that changes a graph by translating, reflecting or stretching it; the result is called the image.Taught in 2.11 Transformations of graphs
- translation
- A transformation that slides every point of a graph the same distance in the same direction, without turning or resizing it.Taught in 2.11 Transformations of graphs
- tree diagram
- A diagram with one set of labelled branches for each stage of an experiment; you multiply probabilities along a path and add across paths.Taught in 4.6 Probability diagrams, rules and independence
- trial
- One run of a random experiment, such as one roll of a die or one spin of a spinner.Taught in 4.5 Probability foundations and expected value
U
- union
- The event , read " or ": the outcomes in at least one of the events, including those in both.Taught in 4.6 Probability diagrams, rules and independence
- unit circle
- The circle of radius centred at the origin, ; the point on it at angle from the positive -axis is .Taught in 3.5 Unit-circle trigonometry and exact values
- unit vector
- A vector of magnitude 1; the unit vector in the direction of is .Taught in 3.12 Vectors in 2D and 3D
V
- variance
- The mean of the squared distances of the data values from their mean, written : the square of the standard deviation.Taught in 4.3 Central tendency and dispersion
- variance of a random variable
- The expected squared distance of from its mean, ; its square root is the standard deviation.Taught in 4.14 Discrete and continuous random variables
- vector
- A quantity with both a magnitude (size) and a direction, drawn as an arrow and written in bold, such as , or as .Taught in 3.12 Vectors in 2D and 3D
- vector equation of a line
- An equation , , that gives the position vector of every point on a line from the position vector of one known point and a direction vector .Taught in 3.14 Vector equations of lines
- vector equation of a plane
- An equation , , giving every point of the plane through the point with position vector that contains the non-parallel directions and .Taught in 3.17 Vector equations of planes
- vector product
- The vector , where is the angle between and and is a unit vector perpendicular to both; its length is the area of the parallelogram they form, and it is also called the cross product.Taught in 3.16 Vector product
- velocity
- The rate of change of displacement, . Its sign gives the direction of motion.Taught in 5.9 Kinematics
- Venn diagram
- A diagram that draws the sample space as a rectangle and each event as a circle inside it; where circles overlap, the outcomes are in both events.Taught in 4.6 Probability diagrams, rules and independence
- vertex
- The turning point of a parabola: its minimum point if it opens upwards, its maximum point if it opens downwards.Taught in 2.4 Key features of graphs
- vertical stretch
- The transformation , which multiplies every -coordinate by the scale factor and keeps every -coordinate.Taught in 2.11 Transformations of graphs
- viewing window
- The part of the coordinate plane a calculator screen shows, set by the smallest and largest values of and .Taught in 2.3 Graphs of functions
W
- without replacement
- Choosing items one after another without putting each one back, so the total, and the probabilities, change after every pick.Taught in 4.6 Probability diagrams, rules and independence
X
- x-intercept
- A point where a graph crosses the -axis, found by putting .Taught in 2.1 Straight-line equations
Y
- y-intercept
- The point where a graph crosses the -axis, found by putting .Taught in 2.1 Straight-line equations
Z
- z-value (standardised value)
- The number of standard deviations a value lies from the mean, : positive above the mean, negative below it.Taught in 4.12 Standard normal variables
- zero of a function
- A value with : a root of , and the -coordinate of a point where the graph meets the -axis.Taught in 2.4 Key features of graphs
- zero vector
- The vector with every component 0: it has no length, and .Taught in 3.12 Vectors in 2D and 3D