Radians, arc length and sector area
In a minute
A measures an angle by the arc it cuts off: the arc of one radian is exactly as long as the radius. With angles in radians, the arc and area of a slice of a circle have short formulas, and . You use them on both papers, often inside a perimeter or a shaded region.
You'll be able to
- Explain what one is, and convert between degrees and radians.
- Write a radian measure as an exact multiple of or as a decimal.
- Find the arc length, perimeter and area of a , including a major sector.
- Work backwards from a given arc or area to find the radius or the angle.
- Find the area of a , and solve sector equations on your GDC.
Before you start2 quick questions on what this builds on
Revise first: 3.2 Triangle trigonometry
Measuring angles in radians
Degrees split a full turn into parts, a number chosen long ago. Nothing about a circle forces it.
A uses the circle itself. Take the radius as your ruler. Then measure an angle by how many radius-lengths of it cuts off at the edge.
θ = °
Arc length s = rθ =
Sector area A = ½r²θ =
It starts at with , and the arc is : the same as the radius. Change , and the arc still equals . Now slide up until the slice fills the circle, at about . The widget calls the arc length ; the formula booklet calls it .
Why ? The circumference is , so the whole circle holds radius-lengths of arc. A full turn is radians, and a half turn is radians.
Every conversion comes from this one fact. One degree is radians, and one radian is degrees:
So radian is , a little under . Keep that in mind for quick estimates.
An angle with no degree sign is in radians. You can write it two ways: is exactly , or about . Paper 1 usually expects the exact multiple of .
Try it first, then reveal one step at a time.
- Multiply by : .
- Simplify the fraction. Divide the top and bottom by : .
- So radians.
- Check: is between and . In the same way, is between and .
Try it first, then reveal one step at a time.
- Multiply by : . This is the exact value.
- Work out the decimal:
- Round only at the end: radians to 3 s.f.
- Check: is a bit less than , so it should be a bit less than radian.
Arc length and sector area
A is a slice of a circle cut off by two radii, like a slice of pizza. Its curved edge is an .
Say the angle at the centre is . A full turn is , so the sector is the fraction of the whole circle.
Its arc is that fraction of the circumference: . Its area is that fraction of the circle's area: . The cancels, which is why radians give such short formulas.
Both are in the formula booklet, so you don't need to memorise them. In each, is the radius and must be in radians. If you are given degrees, convert first.
The perimeter of a sector is the whole way round its edge. That is two straight radii plus the arc, so .
Try it first, then reveal one step at a time.
- Arc length: cm.
- The perimeter is the arc plus two radii: cm.
- Check: is a third of a full turn. A third of the circumference is , as found.
Try it first, then reveal one step at a time.
- Convert the angle first: .
- Substitute into : .
- Simplify: .
- Check: is of a turn, and .
Two radii split a circle into two sectors. The smaller one, with angle , is the minor sector. The larger one is the major sector, and its angle is the rest of the turn, .
Try it first, then reveal one step at a time.
- The major sector's angle is the rest of the full turn: .
- Substitute: .
- Expand: .
- Check: the whole circle minus the minor sector gives the same.
Sometimes you know the arc or the area and need or . Write the formula as an equation, then solve it.
One link saves time: . So if you know the arc and the area, you get in one step.
Try it first, then reveal one step at a time.
- Use with : .
- So cm.
- Now use : , so radians.
- Check in the area formula: .
Segments and Paper 2 problems
The straight line joining the ends of an arc is a . It cuts the into two pieces: the triangle , and a between the chord and the . As with sectors, when the angle at is less than , this arc is the minor arc and this segment is the minor segment.
So the segment's area is the sector's area minus the triangle's. The triangle has two sides of length with the angle between them. By from 3.2, its area is .
This is not in the booklet as one formula, so learn the idea: sector minus triangle. The triangle formula is in the booklet.
Try it first, then reveal one step at a time.
- Sector: .
- Triangle: is a right angle, so . The area is .
- Segment sector triangle .
- Check: . It is positive and smaller than the sector, .
On Paper 2 you may be given an area and asked for the angle. Often appears both on its own and inside , so you can't rearrange for it. Write the equation down, then solve it on your GDC.
Try it first, then reveal one step at a time.
- Write the segment's area: .
- Write down the equation: . This line earns the method mark.
- In radian mode, graph both sides and find where they cross:
- A bigger angle always gives a bigger segment, so this is the only answer. It is about , less than , so the segment is minor: .
Common mistakes
- Giving the arc as the perimeter. A sector's perimeter is , so always add the two radii.
- Putting an angle in degrees into or . Convert it to radians first.
- Using with in radians, or for the area. With radians the area is .
- Finding in degree mode for an angle in radians. Check the mode at the start of Paper 2.
- Using the minor angle for a major sector. The larger sector has angle , so check which region the question means.
- Rounding too early, for example rounding before you square it. Keep the full calculator value until the final answer.
Exam tips
- "Find the exact area" means leave in your answer, as in . A decimal is not exact.
- On Paper 2, write down the equation before you solve it on your GDC, such as . That line earns the method mark.
- If the question says the angle is acute, or the sector is minor, reject any GDC solution that breaks that condition.
- "Show that" a value rounds to a given decimal: write a more accurate value first, such as , then the given .
Key takeaways
Practise this
17 past-paper questions on 3.4 in the AA HL bank, each with a mark scheme and a worked explanation.