Circular functions, graphs and transformations
In a minute
The graphs of and are waves that repeat every , and repeats every . Every trig wave you meet is one of these, stretched and moved into the form . Read off , , and and you know the wave's height, length and position, which is how you model tides, wheels and seasons.
You'll be able to
- Sketch , and in degrees or radians, and state their and .
- Read the amplitude, period, , maximum and minimum of , and find the constants from a graph.
- Describe the stretches and translations that turn into , in an order that works.
- Build a trig model of a real repeating situation, use it with your calculator, and rewrite a regression result in the form .
Before you start3 quick questions on what this builds on
Revise first: 2.11 Transformations of graphs and 3.5 Unit-circle trigonometry and exact values
The graphs of sine, cosine and tangent
In 3.5 you met and as the coordinates of a point on the unit circle. Now let the angle keep growing, and plot each one against the angle.
As the point goes round, its height rises to , falls to and returns to . After one full turn, radians, it is back where it started, so the graph starts again.
θ = 30°
cos θ =
sin θ =
Both are smooth waves between and , with the same shape. starts at . starts at its peak: it is the sine wave moved to the left.
A graph that repeats like this is . Its measures how tall the wave is.
Now . It is , which is in the formula booklet.
Where , at , the fraction has no value. The graph has a vertical there.
Between two asymptotes, climbs through every real number. It has no maximum or minimum, so it has no amplitude.
Each piece is a copy of the one before, moved to the right. So the period of is , not .
The angle can be in degrees or radians. Only the -axis labels change: becomes and becomes . A domain such as is in degrees; one with no degree sign is in radians.
Try it first, then reveal one step at a time.
- One wave of starts at a maximum at . It falls through at to its minimum, , at .
- The minima repeat every period, . So they are at , at , at , and so on.
- Keep only the ones with : and . The value is outside the domain.
- Check: , the least value cosine can take.
Try it first, then reveal one step at a time.
- The domain is in degrees, so work in degrees.
- has no value where . The first place is .
- The asymptotes repeat every period of , which is . So the next is at .
- The next, , is outside the domain. Write each asymptote as an equation.
Amplitude, period and the principal axis
Take . Multiplying by makes the wave reach above and below its middle. Adding lifts the middle up to . So the curve runs between and .
Now take . The inside, , reaches when . So one whole wave fits between and . Doubling halves the .
The general form is , with constants , , , and . The middle line it swings about is the .
The is a distance, so it is never negative. A negative flips the wave but keeps its height. The constant slides the wave sideways and changes none of these values.
The same holds for . For the period is (or ), with no amplitude.
Try it first, then reveal one step at a time.
- Match to : , , and .
- The amplitude is , so .
- The period is .
- Check: and only move the wave, so they don't change or . The curve runs between and , and .
Try it first, then reveal one step at a time.
- The principal axis is halfway between the maximum and minimum values: .
- The amplitude is half the difference: . It is positive, as the question needs.
- From a maximum to the next minimum is half a wave. So the period is .
- Use period : , so .
- Check: gives at and at .
Transformations of trig graphs
In 2.11 you transformed graphs with , and . A trig graph is no different. Each constant in is one of those moves.
A positive moves the wave left and a negative moves it right: is moved right. A negative adds a in the -axis.
The order of the horizontal moves matters: stretch first, then translate by . Translate first, and the stretch squeezes the shift too, giving instead.
So if the bracket is written , take out first. For example, is a translation of left, not .
Try it with the base set to , set to (horizontal scale factor ) and (shift right) set to . The peak lands at about . Go by the slider names: the widget's shifts right, so it is minus the in .
(1, 1) maps to (1.00, 1.00)
Try it first, then reveal one step at a time.
- Vertical stretch, scale factor : multiply the whole function by . This gives .
- Horizontal stretch, scale factor : replace by . This gives .
- Translation left: replace every by . The now multiplies the whole bracket: .
- Check with the peak of . The stretches send it to and the translation to . Indeed .
Try it first, then reveal one step at a time.
- (a) Match to : , , and .
- So: a vertical stretch with scale factor , a horizontal stretch with scale factor , a translation of units to the left, and a translation of unit down. The horizontal stretch must come before the horizontal translation.
- (b) has a maximum at . The horizontal stretch keeps , and the translation moves it to . The height becomes .
- That maximum is not in . Maxima repeat every period, , so the next one is at .
- Check: , the largest value can take.
Modelling periodic situations
Tides, a seat on a Ferris wheel and the hours of daylight all repeat in smooth waves, so a sine or cosine function can model them. Find the constants from the largest value, the smallest value and the time of one cycle.
Then pick the function and the sign of that start in the right place. starts at a maximum, starts at a minimum, and starts on the , going up.
Try it first, then reveal one step at a time.
- Principal axis: .
- Amplitude: . It is positive, as the question says.
- The period is days, so and .
- With , the cosine is largest when its bracket is . That must happen on day , so and . Here the model writes , so is a translation to the right.
- Check: . Half a year later the bracket is , and .
Your calculator can also fit a sine curve to data, by sine regression. Many calculators don't give the IB form: they give , with still inside.
Try it first, then reveal one step at a time.
- In the calculator's form the number added inside the bracket is not the shift, because has not been factored out.
- Take out of the bracket: .
- So , , and . The wave is moved units to the right, not .
- Check by expanding: , as the calculator gave.
Some also return a negative , or a shift that is a whole period out. Check the result against the data before you use it.
Try it first, then reveal one step at a time.
- Set your calculator to radians, since the model has no degree sign.
- Write down the equation: . This line earns the method mark.
- Graph and for . Find both intersections: and
- Check: the period is hours, and the maximum, , is at . The two times sit the same distance, hours, either side of , as they should for a wave.
Common mistakes
- Giving as the period of . Tangent repeats every (); only sine and cosine take .
- Dividing by only part of . The period is divided by the whole coefficient of , so keep any that belongs to .
- Reading the shift before factorising. moves left, not .
- Choosing the wrong sign for in a model. A positive with starts at a maximum and a negative starts at a minimum, so test your model at .
- Working in the wrong angle mode. Use radians unless the question shows a degree sign, and set the mode before you graph or substitute.
- Mixing hours and minutes. hours minutes is hours, not .
Exam tips
- 'Write down' the amplitude or period needs no working, but on Paper 1 give it exactly, such as .
- 'Sketch' a trig graph with smooth, rounded turning points. Label the maximum and minimum points and the axis intercepts, and for give each asymptote as an equation.
- 'Describe' needs the name and detail of every transformation, such as 'translation units to the right'. Give the horizontal stretch before the horizontal translation.
- On Paper 2, check the angle mode, write down the equation you give the calculator, and round only the final answer to 3 s.f.
Key takeaways
Practise this
6 past-paper questions on 3.7 in the AA HL bank, each with a mark scheme and a worked explanation.