Vectors in 2D and 3D
In a minute
A has a size and a direction, so it can describe a movement such as “4 across and 3 up”. You write vectors with components or with , and , then add, subtract and scale them. Their lengths give distances in 3D, and their algebra proves facts about shapes.
You'll be able to
- Draw a as an arrow, and tell a from a .
- Write vectors as column vectors or with the , , .
- Add, subtract and scale vectors, using the and .
- Spot and points.
- Find a , a , and the distance .
- Prove geometric facts with vectors.
Before you start2 quick questions on what this builds on
Revise first: 3.1 3D distance, midpoint and measurement
Vectors as arrows
A mass of 5 kg is only a size: a . “Walk 300 m” is not enough to follow. “Walk 300 m north-east” is, because it adds a direction.
You draw a as a directed line segment: an arrow. Its length is the magnitude and its arrowhead gives the direction.
The arrow from A to B is written . A single vector is printed in bold, such as . By hand, underline it: .
Count the movement on the grid to get the components. goes 4 right and 3 up, so it is the column vector . Moves left or down are negative.
Try it first, then reveal one step at a time.
- The tail T is at and the arrowhead U is at .
- Across: 9 to 6 is 3 left, so the first component is .
- Up: 6 to 2 is 4 down, so the second component is .
- Check: 3 left and 4 down from lands on , which is U.
Now fix an origin O. The of a point A is , written . Its components are the coordinates of A: if A is , then .
A position vector always starts at O. A vector between two points, such as , is a : the move from A to B.
In 3D a vector has three components, along the -, - and -axes. The are one-unit steps along each axis:
Any vector is a sum of steps along the axes, so exam questions write it in either of two ways:
The numbers , and are the components. A missing base vector means a zero component. In 2D there is no : .
Try it first, then reveal one step at a time.
- The term is , so the first component is 6.
- There is no term, so the second component is 0.
- means , so the third component is .
- The coordinates of D are the components of its position vector: .
Adding and subtracting vectors
Walk along , then along . The single arrow from your start to your finish is the sum . So put the tail of on the head of , then join start to finish.
With components, add matching components: moves along the same axis add up.
The has every component 0. It is the move that goes nowhere, so .
The has the same length as but points the opposite way. So , and for any two points.
Subtracting means adding the negative: . With components, subtract matching components.
Try it first, then reveal one step at a time.
- Write as a column vector. It has no term, so .
- First components: . Subtracting adds 2.
- Second components: .
- Third components: .
To get from A to B, you can go back from A to O, then out from O to B:
Read it as “end minus start”.
Try it first, then reveal one step at a time.
- Write the : and .
- End minus start: .
- Work out each component: .
- Check: A plus is , which is B.
Without numbers, write the arrow you need as a route made of arrows you know.
Scalar multiples and parallel vectors
is two copies of end to end. It points the same way and is twice as long, so you write it .
For any , multiply every component by . If , points the same way as ; if , the opposite way.
Try it first, then reveal one step at a time.
- Write both as column : and . There is no in .
- Scale: and .
- Subtract matching components: .
- Simplify: , which is .
To test whether two vectors are , divide matching components. If every ratio is the same number , they are parallel. A zero component must match a zero component.
Try it first, then reveal one step at a time.
- Parallel means , so , and .
- The first equation gives .
- Then .
- And , so .
- Check: , the first vector with .
Three points are when one straight line passes through all of them. Parallel arrows can lie on different lines, so use two arrows that share a point.
Try it first, then reveal one step at a time.
- Find .
- Find .
- Collinear means . The first components give , so . The third components agree: .
- The second components must match too: , so .
- So : C is three times as far from A as B is.
Magnitude, unit vectors and distance
The of a is the length of its arrow. In 2D the components are the short sides of a right-angled triangle, so .
In 3D, use Pythagoras twice, as for a cuboid's space diagonal in 3.1. The formula is in the booklet:
In 2D, leave out . A magnitude is a and is never negative. Also , and .
So divide every component by . The , and are . For length in the direction of , use ; for the opposite direction, use .
Try it first, then reveal one step at a time.
- Find the magnitude: .
- Divide every component by 9: .
- Check the length is 1: .
The distance between two points is the length of the arrow that joins them:
It is the distance formula from 3.1, written with vectors.
Try it first, then reveal one step at a time.
- Write as a 3D column vector. There is no , so .
- End minus start: .
- Use the magnitude formula: .
- Simplify the surd: . On Paper 1, leave it exact.
Try it first, then reveal one step at a time.
- End minus start: .
- Square both sides of : .
- Expand: , so .
- Rearrange to . Write this down before using your calculator: it earns the method mark.
- The root finder gives and . Both are valid.
Proving geometric facts with vectors
turn a geometry problem into algebra. Write every arrow in terms of a few vectors you know, then read the geometry off the algebra.
1. Choose two vectors to build from that are not , such as the and .
2. Write each vector you need as a route, such as .
3. Read off the geometry. A multiple means parallel, with lengths in the ratio . Equal position vectors mean the same point.
This is the midpoint formula from 3.1, written with vectors.
Try it first, then reveal one step at a time.
- M is halfway along [OA], so . Likewise .
- End minus start: .
- Factor out : .
- Conclude in words: is a scalar multiple of , so [MN] is parallel to [AB], and it is half as long.
Try it first, then reveal one step at a time.
- Opposite sides are equal vectors, so and the diagonal .
- The other diagonal: .
- Route to X: A to B, then halfway along [BD]. .
- So : X is also the midpoint of [AC]. The diagonals share a midpoint, so they bisect each other.
The scalar product in 3.13 adds a test for right angles.
Common mistakes
- Losing a sign when subtracting a negative component: , not . Bracket negative components first.
- Writing for a component of in a magnitude. That is ; you need .
- Dividing only some components to make a unit vector. Divide every component by .
- Calling points collinear because two arrows are parallel, with no shared point. Use arrows that both start at the same point.
- Giving a point when the question asks for a vector, or a vector when it asks for a distance. Re-read the question first.
Exam tips
- In a **show that** or **prove** question, write each route you use. End with a sentence that gives the reason, such as “a scalar multiple, so parallel”. A bare conclusion loses the reasoning mark.
- On Paper 1, give magnitudes exact, as a surd such as (simplified is neater), not the decimal .
- On Paper 2, write down the equation you put into your calculator, then give each answer to 3 s.f.
Key takeaways
Practise this
5 past-paper questions on 3.12 in the AA HL bank, each with a mark scheme and a worked explanation.