Intersections and angles of lines and planes
In a minute
Lines and planes can meet at a point, along a line, or not at all. Solving their equations together tells you which: the system has one solution, infinitely many or none. Their angles come from scalar products of direction and vectors.
You'll be able to
- Find where a line meets a plane, or show that it is parallel to the plane or lies in it.
- Find the of two planes, and recognise parallel planes.
- Solve the equations of three planes as a linear system, and describe the arrangement each kind of solution shows.
- Find the angle a line makes with a plane.
- Find the angle between two planes, and tell when they are perpendicular.
Before you start3 quick questions on what this builds on
Revise first: 1.16 Systems of linear equations, 3.15 Relationships between lines, 3.16 Vector product and 3.17 Vector equations of planes
Where a line meets a plane
In 3.15 two lines meeting meant solving for two parameters. A line meeting a plane needs only one. A point of the line that is also on the plane must satisfy the plane's equation.
1. Write the general point of the line, using its .
2. Substitute it into the plane's Cartesian equation, .
3. Solve the equation for , then put back into the line to get the point.
The equation in step 2 is linear in . So it has one solution, none, or every works.
Try it first, then reveal one step at a time.
- Write the general point of the line: , , .
- Substitute into the plane: .
- Expand and collect: , so and .
- Put into the line: , , .
- Check in the plane: . It works.
With an unknown constant, choose it to make the coefficient of , or the right-hand side, zero.
Try it first, then reveal one step at a time.
- Substitute the general point into : .
- Collect the terms: , that is .
- lies in only if this holds for every . So the coefficient must be zero: .
- Then the equation reads , true only when . Any other makes parallel to without meeting it.
- Check: , and the point gives .
Where two planes meet
Two pages of an open book meet along the spine, a straight line. Two planes do the same unless they are parallel. Two equations in three unknowns usually leave one unknown free (1.16).
To find the line, remove one unknown between the equations. Let another equal and write the rest in terms of it.
Try it first, then reveal one step at a time.
- The normals and are not multiples of each other, so the planes meet in a line.
- Add the equations to remove : , so .
- Let . Then .
- From the first equation, .
- So every point of the line is . Check in the second plane: for every .
A second method: the line lies in both planes, so its direction is perpendicular to both normals. The vector product from 3.16 gives such a vector.
Here is the line's direction. For a point, set to a coordinate whose component in is non-zero (usually ). Then solve for the other two.
Try it first, then reveal one step at a time.
- Read off the normals: and .
- Find the direction: .
- Check it is perpendicular to both normals: and .
- Find a point. Set : and . The second gives , so , and .
- Check in both planes: and .
Where three planes meet
Three planes give three equations in , and : a system like those in 1.16. Its solutions are the points on all three planes, so the number of solutions shows how the planes are arranged.
Usually they share one point, like the floor and two walls at the corner of a room. If they all pass through one line, like pages turning on a spine, they form a .
With no solution, check the . If two are parallel, those planes are parallel. If none are, each pair meets in a line, the lines are parallel, and the planes form a triangular prism.
On Paper 2 the GDC's equation solver finds a single point. Write down the you enter.
Try it first, then reveal one step at a time.
- Write down what you enter: .
- The solver gives , and , a unique solution. So the planes meet at one point.
- Check with the unrounded values in : .
- Round each to 3 s.f.: the point is .
With a parameter, row reduce by hand. The last row's coefficient decides whether there is one point; its right-hand side then decides between a line and no common point.
Try it first, then reveal one step at a time.
- Clear the first column. gives and gives .
- The new minus the new gives , which says .
- If , then : one solution, a single point. So a line needs .
- With the row is . It is all zeros, giving infinitely many solutions, only when .
- Let . Row 2 gives , and row 1 gives . The line is .
- If and , there is no solution. No two normals are parallel, so the planes then form a prism.
Angle between a line and a plane
Shine a light straight down onto a plane, and a line casts a shadow on it. The is the angle between the line and its shadow, from to .
The shadow is awkward to find, but the comes straight from the plane's equation. If the line makes angle with the plane, it makes with the normal.
The booklet gives the angle between two vectors.
With the line's direction and the plane's normal , it gives the angle with the normal. Since , you get a formula to learn.
If points the other way, the angle with the normal is instead, and its cosine is . The modulus removes that sign, so is always acute.
Try it first, then reveal one step at a time.
- Read off the line's direction, , and the plane's normal, .
- Scalar product: .
- Magnitudes: and .
- So .
- is acute, so . The angle with the normal is , making in total.
Try it first, then reveal one step at a time.
- Direction of : . Normal of the plane: .
- , and .
- Write down what you enter, in degree mode: , so .
- Compare: is the obtuse angle with the normal, and gives the same answer.
The angle between two planes
Look along the line where two planes meet, so each appears edge-on as a straight line with its at right angles to it. Turn one plane onto the other, and its normal turns by the same angle.
It is the booklet's formula for the normals, with a modulus, since reversing a normal flips the sign. If , the planes are perpendicular.
Try it first, then reveal one step at a time.
- Read off the normals: and .
- Scalar product: .
- Magnitudes: and .
- So .
- This is a standard exact value, so .
Try it first, then reveal one step at a time.
- Normals: and .
- , and .
- Without the modulus, , obtuse because the scalar product is negative.
- Write down what you enter, in degree mode: , which is .
Common mistakes
- Using arccos when a line meets a plane. That gives the angle with the normal: use arcsin, or subtract from .
- Giving an obtuse angle between two planes. Take the modulus of the scalar product, or subtract from .
- Concluding that a line lies in a plane from one point. Also show .
- Setting only the last row's coefficient to zero. A common line also needs a zero right-hand side; otherwise the planes share no point.
- Sign slips in a vector product's middle component. Check the result against both normals: each scalar product must be .
- Using the normal as the direction of a line parallel to a plane. A parallel line needs .
Exam tips
- “Interpret geometrically” wants the arrangement in words: a point, a common line, parallel planes or a prism. Justify it from the normals.
- To “show that” a line is parallel to a plane, show . To show it is not in the plane, show one of its points is off it.
- Paper 1 angles are exact, such as , so . On Paper 2, give the acute angle in degrees to 3 s.f.
- On Paper 2, write down the expression or augmented matrix you enter before the GDC's answer. That line earns the method mark.
Key takeaways
Practise this
14 past-paper questions on 3.18 in the AA HL bank, each with a mark scheme and a worked explanation.