Scalar product and angles
In a minute
The turns two vectors into one number: multiply matching components and add. That number also equals , so it gives you the angle between the vectors. A scalar product of tells you they are perpendicular.
You'll be able to
- Calculate a from column vectors or from , , form.
- Expand and simplify using their rules, including .
- Find the angle between two vectors, exactly or to 3 s.f., including an angle in a triangle.
- Use a zero scalar product to show two vectors are perpendicular or to find an unknown.
- Recognise parallel vectors from .
Before you start3 quick questions on what this builds on
Revise first: 3.12 Vectors in 2D and 3D
The scalar product
In 3.12 you added vectors and multiplied them by numbers. Now you multiply two vectors together. The does this in the simplest way: multiply matching components, then add.
For example, . The answer is a single number, a scalar, not a vector. That is where the name comes from.
This is in the formula booklet, so you don't need to memorise it. In 2D there is no third component, so .
Vectors in , , form work the same way, because the coefficients are the components. So uses and , and equals .
Try it first, then reveal one step at a time.
- Pair up the components: first with first, second with second, third with third.
- Multiply each pair, keeping the signs: , and .
- Add the three products: .
- A scalar product can be positive, zero or negative. It is one number, so the answer has no components.
Try it first, then reveal one step at a time.
- Write the scalar product in terms of : .
- Simplify: .
- Set it equal to the given value: , so .
- Check with : .
Rules for scalar products
follow rules that look like ordinary multiplication. They let you expand brackets of vectors without knowing any components.
1. Order doesn't matter: . This is called being commutative.
2. You can expand brackets: .
3. A scalar moves to the front: .
4. A vector dotted with itself gives its length squared: .
Rules 1 to 3 hold because each component works like ordinary multiplication of numbers. For example, for every pair, so the two sums are equal.
Try it first, then reveal one step at a time.
- Expand like two brackets, using rules 2 and 3: .
- Rule 1 says , so collect the middle terms: .
- Rule 4 gives and .
- Substitute: .
Rule 4 also turns a length into a scalar product. To work with , square it and expand.
Try it first, then reveal one step at a time.
- Square the length you know and use rule 4: .
- Expand: . The two cross terms are equal by rule 1, so they combine.
- Substitute the lengths: .
- Rearrange: .
The angle between two vectors
The also measures how much two vectors point the same way. It is large and positive when they point roughly together. It is negative when they point roughly apart.
The angle between and is measured with both vectors drawn from the same point, tail to tail. It is always from to , or to in radians.
Apply the from 3.2 to this triangle: .
Expanding with the rules instead gives . Compare the two lines: the last terms must be equal.
Rearrange for and write the scalar product in components. That gives the second booklet formula:
Both formulas are in the booklet. The magnitudes are positive, so the sign of tells you the type of angle at once. Positive means acute, zero means a right angle, and negative means obtuse.
Drag the tips of and . Watch and change sign as passes . Try with .
a·b = 3 × 4 + 4 × 1 = 16.00
|a| = , |b| =
cos θ =
Try it first, then reveal one step at a time.
- Scalar product: .
- Magnitudes: and .
- Substitute into the formula: .
- This is an exact value from 3.5: . The scalar product is positive, so an acute angle fits.
For an angle inside a triangle, use the two vectors that start at that corner. For the angle at B, use and , both leaving B.
Try it first, then reveal one step at a time.
- Let , and be the position vectors of A, B and C. Both vectors must leave B: and .
- Scalar product: .
- Magnitudes: and .
- Write the expression down before you use your calculator: . This line earns the method mark.
- In degree mode, . Round only now.
Perpendicular and parallel vectors
When , , so . The reverse is true as well, as long as neither vector is the zero vector.
The zero vector is why non-zero matters. for every , but the zero vector has no direction, so it can't be perpendicular to anything.
Try it first, then reveal one step at a time.
- Perpendicular means the is : .
- Simplify: .
- Factorise: , so or .
- Both vectors are non-zero for these values. Check : . Check : .
Parallel vectors point the same way, with , or opposite ways, with . So is or .
For any other angle, , so is less than . When the two are equal, the sign of tells you the direction: positive for the same way, negative for opposite ways.
The rules and the zero test combine in proofs. You work with letters, not components.
Try it first, then reveal one step at a time.
- Write the diagonals in terms of and . Since , . Also .
- Expand their scalar product: .
- The scalar product is commutative, so and the middle terms cancel. State this reason in an exam answer.
- Use rule 4: what is left is , which is because .
- The diagonals are non-zero vectors with a scalar product of , so they are perpendicular.
Common mistakes
- Writing and leaving out the magnitudes. The rule is , so put both lengths in before you solve.
- Replacing with . It is , so square the length.
- Losing a minus sign when multiplying components, such as or . Write each product with its sign before you add.
- Setting two scalar products equal because two angles are equal. The vectors usually have different lengths, so set the two values of equal instead, magnitudes included.
- Finding an angle in radian mode when the question wants degrees. Set the mode before you use .
- Finding the angle at B from and . That gives minus the angle, so use two vectors that leave B.
Exam tips
- “Find” the angle: write with your numbers substituted before you give the angle. That line earns the method mark, even if a later step slips.
- “Show that” two vectors are perpendicular: work out the scalar product, show it equals , and finish with a sentence such as “so the vectors are perpendicular”.
- In a proof with letters, name each rule you use, such as “the scalar product is commutative”. A cancellation with no reason can lose the reasoning mark.
- On Paper 1, “exact” means leaving as a surd or fraction and recognising a standard angle such as . On Paper 2, keep the full value of and round only the angle, to 3 s.f.
Key takeaways
Practise this
10 past-paper questions on 3.13 in the AA HL bank, each with a mark scheme and a worked explanation.