Triangle trigonometry
In a minute
Trigonometry finds the sides and angles of a triangle you can't measure. In a right-angled triangle you use sine, cosine and tangent. In any other triangle you use the or the , and gives its area.
You'll be able to
- Find a side or an angle of a right-angled triangle with , or , using , or for an angle.
- Use the when you know a side and the angle opposite it.
- Use the to find a side from two sides and the angle between them, or an angle from all three sides.
- Find the area of any triangle with .
- Sketch and label a diagram, choose the right rule, and chain rules together without rounding too early.
Before you start2 quick questions on what this builds on
Revise first: 2.2 Function concepts, domain and range and 3.1 3D distance, midpoint and measurement
Right-angled triangles
Two right-angled triangles with the same angle (theta) are enlargements of each other. So the ratio of any two sides depends only on , not on the size. These ratios are sine, cosine and tangent.
To name the sides, stand at the angle . The is the longest side, opposite the right angle. The opposite side faces . The adjacent side runs from to the right angle.
These are not in the formula booklet. Remember them as SOH CAH TOA. To find a side, pick the ratio that links the side you know and the side you want.
To find an angle, you undo the ratio with an inverse function, just as in 2.2. If , then . Your calculator has , and keys, usually as second functions.
Try it first, then reveal one step at a time.
- Stand at the angle at P. PR faces the right angle, so it is the hypotenuse. QR faces P, so it is the opposite side.
- Opposite and hypotenuse means sine: .
- Multiply both sides by :
- Sense check: QR must be shorter than the hypotenuse , and it is.
Try it first, then reveal one step at a time.
- Stand at X. YZ faces X, so it is the opposite side. XY runs from X to the right angle, so it is adjacent.
- Opposite and adjacent means tangent: .
- Undo the tangent with the inverse function:
- Round only at the end, to 3 s.f.
On Paper 1 there is no calculator. If you know one ratio of an acute angle, draw a right-angled triangle with those two sides. Pythagoras gives the third side, and the other ratios follow.
Try it first, then reveal one step at a time.
- Draw a right-angled triangle with angle , opposite side and hypotenuse . Then as required.
- Find the adjacent side with Pythagoras: .
- Tangent is opposite over adjacent: .
- Rationalise the denominator: .
The sine rule
Most triangles have no right angle, so SOH CAH TOA can't be used directly. Two rules work in every triangle. The first one links each side to the angle facing it.
Label the triangle the standard way. Capital letters , , are the angles at the corners. Lower-case is the side opposite angle , is opposite , and is opposite .
Use the when you know one side and the angle opposite it, plus one more side or angle. You only ever use two of its three fractions at a time.
To find an angle, flip both fractions: . Then the unknown is on top, which makes the algebra easier.
Try it first, then reveal one step at a time.
- You know side and the angle facing it. You want , which faces . So use the sine rule.
- Write the two fractions you need: .
- Multiply both sides by :
- Sense check: faces a bigger angle than does, so it should be longer than . It is.
For a positive sine, gives an acute angle, but an obtuse angle has the same sine. That two-triangle case comes in 3.5; here the angle is always clear. It is acute when the side facing it is the shorter known side.
Try it first, then reveal one step at a time.
- Sketch the triangle. KL faces , and LM faces . KM faces , which you don't know yet.
- Find with the sine rule, unknown on top: , so and . It is acute, since . Store this value.
- Angles in a triangle add to : .
- Now KM faces : , so
- You used the stored angles, not rounded ones, so the final digit is safe.
The cosine rule
Suppose you know two sides and the , the angle between them. No side is paired with the angle facing it, so the is stuck. The handles it: it is Pythagoras with a correction term for a corner that isn't .
In the first form, is the angle between sides and , and is the side facing it. Rename the letters to fit your triangle, keeping that pattern.
If , then and you get , which is Pythagoras. If is obtuse, is negative, so comes out longer than Pythagoras would give.
Try it first, then reveal one step at a time.
- You know two sides and the angle between them, so use the cosine rule for a side.
- Substitute: .
- Work it out:
- Take the positive square root:
To find an angle from three sides, use the second form. Put the side facing the angle you want in the place, with the minus sign.
Try it first, then reveal one step at a time.
- The largest angle faces the longest side, cm. So , with and .
- Substitute: .
- The cosine is negative, so the angle is obtuse. returns obtuse angles correctly: .
On Paper 1 you may be asked for an exact cosine instead of the angle. Its sign tells you whether the angle is acute or obtuse.
The area of a triangle
Area is (in the prior-learning section of the booklet), but the height is rarely given.
Look back at the labelled triangle. Take as the base. The height is , so the area is . Trigonometry has found the height for you.
The two sides must meet at the angle you use.
On Paper 1 you may be given another ratio of the included angle. Find its sine first, as in the first section.
Try it first, then reveal one step at a time.
- Draw a right-angled triangle with angle , opposite side and adjacent side , so .
- Pythagoras gives the hypotenuse: . So .
- Use the sine, not the tangent, in the area formula: .
- Simplify: .
On Paper 2, a question may give the area and ask for an unknown length. Set up the area formula as an equation and solve it on your calculator.
Try it first, then reveal one step at a time.
- The angle is between the two sides, so use the area formula.
- Write down the equation you will solve: . This line earns the method mark.
- Solve it on the calculator in degree mode, with a positive starting value: . The equation is a quadratic, so it also has a negative root,
- A length can't be negative, so reject the negative root. Check: .
Diagrams and choosing a rule
Harder questions chain two or three rules. A labelled sketch makes each choice easier.
1. Sketch the triangle, even if a diagram is given. Mark what you know and what you want.
2. A right angle? Use , or .
3. A side and the angle facing it? Use the .
4. Two sides and the included angle, or all three sides? Use the .
5. An area needs two sides and the . Find a missing one first.
Try it first, then reveal one step at a time.
- For the area you need an included angle, and no angle is given. Three sides means the cosine rule finds one.
- Choose the angle facing the side . It faces the shortest side, so it is acute. .
- Find with a right-angled triangle: adjacent , hypotenuse , so opposite . So .
- is between the sides and : .
A quadrilateral splits into two triangles along a diagonal. Find the diagonal in one triangle, then use it in the other.
Try it first, then reveal one step at a time.
- Triangle ABC has two sides and the included angle, so the cosine rule gives the diagonal: , so Store it.
- Triangle ACD: the angles add to , so .
- AC faces the angle and CD faces the angle. Sine rule: , so
- Area of ABC Area of ACD , since is the angle between AC and CD.
- Add the stored values: In an exam with separate parts, a wrong AC used correctly later can still earn follow-through marks.
Common mistakes
- Leaving the calculator in radians when the angles are in degrees, so every answer is wrong. Set the mode before the first calculation.
- Rounding a length or angle, then using the rounded value in the next rule. Store the full value and round only the final answer.
- Putting a given into , or using two sides that don't meet at . Find first.
- Dropping the in , or forgetting that the cosine of an obtuse angle is negative.
- Pairing a side with the wrong angle in the sine rule. Each side goes with the angle facing it, so mark those pairs on your sketch.
Exam tips
- Sketch and label a diagram, then write the rule with your numbers substituted. That line earns the method mark even if a later step slips.
- On Paper 1, “find the exact value” means fractions and surds, not decimals. If a cosine is given, a right-angled triangle gives you the sine.
- On Paper 2, give lengths and angles to 3 s.f., with units where the question uses them.
- “Show that” an exact value means working forwards from the given data, for example from a given cosine to the sine, until your last line matches the result.
Key takeaways
Practise this
22 past-paper questions on 3.2 in the AA HL bank, each with a mark scheme and a worked explanation.