The particulate nature of matter cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

The particulate nature of matter

IB PHYSICS · HL
pastpaperprep.com/revision-notes

2.1Particles, density and temperature

ρ=mV\rho = \frac{m}{V}BOOKLET
Ek=32kBTE_\text{k} = \frac{3}{2}k_\text{B}TBOOKLET
Solid: close, fixed positions, vibrating. Liquid: close, sliding past each other. Gas: far apart, fast and random, negligible forces except in collisions.LEARN
TT in K =θ= \theta in ∘C+273^{\circ}\text{C} + 273. A temperature change has the same value in K and in ∘C^{\circ}\text{C}.LEARN
Use kelvin whenever a temperature is multiplied, divided or put in a ratio.LEARN
1 cm3=10−6 m3\pu{1 cm3} = 10^{-6}\ \text{m}^{3}, so 1 g cm−3=1000 kg m−3\pu{1 g cm-3} = \pu{1000 kg m-3}.LEARN
Kelvin temperature measures the average random kinetic energy per particle, whatever the particle's mass.LEARN

2.2Internal energy, phase changes and specific heats

Q=mcΔTQ = mc\Delta TBOOKLET
Q=mLQ = mLBOOKLET
Internal energy = total random kinetic energy of the particles + total intermolecular potential energy.LEARN
Net thermal energy transfer goes from higher to lower temperature until thermal equilibrium, whatever the internal energies.LEARN
During a phase change of a pure substance, temperature and average random kinetic energy are constant; intermolecular potential energy changes.LEARN
ΔT\Delta T is the same in K and °C; actual temperatures convert with TT in K =θ= \theta in ∘C+273^{\circ}\text{C} + 273.LEARN
Insulated mixing, ignoring the container: energy lost by the hot body = energy gained by the cold body.LEARN

2.3Conduction and convection

ΔQΔt=−kAΔTΔx\frac{\Delta Q}{\Delta t} = -kA\frac{\Delta T}{\Delta x}BOOKLET
The three main mechanisms are conduction, convection and thermal radiation. Conduction and convection need particles; radiation crosses a vacuum.LEARN
Conduction: particles with more kinetic energy collide with neighbours and pass it on, with no bulk movement. Metals also conduct by free electrons.LEARN
Once temperatures are steady, the rate of conduction is proportional to kk, AA and ΔT\Delta T and inversely proportional to the thickness Δx\Delta x, in metres.LEARN
Convection: heated fluid usually expands, its density falls and it rises; cooler, denser fluid sinks. It happens only in liquids and gases.LEARN

2.4Thermal radiation and black bodies

L=σAT4L = \sigma A T^{4}BOOKLET
b=L4πd2b = \frac{L}{4\pi d^{2}}BOOKLET
λmaxT=2.9×10−3 m K\lambda_\text{max} T = 2.9 \times 10^{-3}\ \text{m K}BOOKLET
Use absolute temperature in every radiation law: TT in K =θ= \theta in ∘C+273^{\circ}\text{C} + 273.LEARN
A spherical black body of radius RR has A=4πR2A = 4\pi R^{2}, so L=4πR2σT4L = 4\pi R^{2}\sigma T^{4}.LEARN
A black body emits a continuous spectrum. Hotter means more intensity at every wavelength and a shorter peak wavelength.LEARN
For a source radiating equally in all directions, with no absorption on the way, brightness falls as 1d2\frac{1}{d^{2}}: double the distance and the brightness falls to a quarter.LEARN

2.5Emissivity, albedo and Earth's energy balance

emissivity=power radiated per unit areaσT4\text{emissivity} = \frac{\text{power radiated per unit area}}{\sigma T^{4}}BOOKLET
albedo=total scattered powertotal incident power\text{albedo} = \frac{\text{total scattered power}}{\text{total incident power}}BOOKLET
Emissivity and albedo are ratios with no unit, each between 0 and 1. An opaque surface or a whole planet absorbs a fraction 1−α1 - \alpha of the incident power.LEARN
Earth's albedo, about 0.3, varies daily with cloud cover and is higher at high latitude, where ice and snow cover the surface.LEARN
The mean incoming intensity over a planet's surface is S4\frac{S}{4}: power is caught by a disc of area πR2\pi R^{2} and shared over 4πR24\pi R^{2}. For Earth, S=1.36⋅103 W m−2S = \pu{1.36e3 W m-2} (data booklet).LEARN
(1−α)S4=eσT4(1 - \alpha)\frac{S}{4} = e\sigma T^{4}LEARN
Surface in equilibrium, losing energy only by radiation: absorbed solar intensity + intensity radiated down by the atmosphere = intensity the surface radiates.LEARN

2.6Greenhouse gases and the greenhouse effect

The four main greenhouse gases are HX2O\ce{H2O}, COX2\ce{CO2}, CHX4\ce{CH4} and NX2O\ce{N2O}, each with natural and human sources.LEARN
Sunlight peaks in the visible and mostly passes through; Earth radiates infrared (peak near 10 μm10\ \mu\text{m}), much of which greenhouse gases absorb.LEARN
E=hfE = hfBOOKLET
Energy levels: a photon is absorbed only if hfhf equals a gap between vibrational levels; re-emission goes in all directions.LEARN
Resonance: the wave's electric field drives the molecule; it absorbs strongly at a natural frequency f0f_0, where ΔE=hf0\Delta E = hf_0.LEARN
The natural greenhouse effect warms Earth from about 255 K to 288 K. The enhanced effect is extra human-caused warming; burning fossil fuels is the primary cause.LEARN

2.7Pressure, amount of substance and the ideal gas model

P=FAP = \frac{F}{A}BOOKLET
n=NNAn = \frac{N}{N_\text{A}}BOOKLET
PVT=constant\frac{PV}{T} = \text{constant}BOOKLET
Pressure uses only the force perpendicular to the surface; 1 Pa=1 N m−2\pu{1 Pa} = \pu{1 N m-2}.LEARN
Fixed amount of gas: PVPV constant at constant TT; VT\frac{V}{T} constant at constant PP; PT\frac{P}{T} constant at constant VV; TT in kelvin.LEARN
Ideal gas: point molecules in random motion, no intermolecular forces except in collisions, elastic collisions. Its internal energy is all random kinetic energy.LEARN
Pressure comes from molecules changing momentum as they hit the walls: faster or more frequent hits mean higher pressure.LEARN
pV diagram: constant volume is vertical, constant pressure is horizontal, constant temperature is an isotherm curve.LEARN

2.8The ideal gas equations and the kinetic model

PV=nRT=NkBTPV = nRT = Nk_\text{B}TBOOKLET
In gas equations TT is in kelvin, VV in m³ and PP in Pa. R=NAkB=8.31 J mol−1 K−1R = N_\text{A}k_\text{B} = \pu{8.31 J mol-1 K-1} (data booklet).LEARN
On a pressure–volume diagram, an isotherm is a curve with PVPV constant; hotter isotherms lie further from the origin. Vertical lines are constant volume, horizontal lines constant pressure.LEARN
P=13ρv2P = \frac{1}{3}\rho v^{2}BOOKLET
Pressure comes from the rate of change of momentum of molecules colliding with the walls. At constant volume, hotter molecules hit harder and more often; compressed gas at constant temperature hits each unit area more often.LEARN
U=32NkBT=32RnTU = \frac{3}{2}Nk_\text{B}T = \frac{3}{2}RnTBOOKLET
A real gas is close to ideal at low pressure, low density and high temperature (well above its condensation point).LEARN

2.9 ◆The first law of thermodynamics

Q=ΔU+WQ = \Delta U + WBOOKLET
Sign convention: Q>0Q > 0 when thermal energy is supplied to the system; W>0W > 0 when the system does work (expands), W<0W < 0 when work is done on it (compressed).LEARN
A closed system exchanges energy but not mass with its surroundings. An isolated system exchanges neither, so its ΔU=0\Delta U = 0.LEARN
W=PΔVW = P\Delta VBOOKLET
When the pressure changes, the work done is the area under the pressure–volume graph: positive for an expansion, negative for a compression.LEARN
ΔU=32nRΔT=32NkBΔT\Delta U = \frac{3}{2}nR\Delta T = \frac{3}{2}Nk_\text{B}\Delta TBOOKLET
Constant volume: W=0W = 0, so Q=ΔUQ = \Delta U. Ideal gas at constant temperature: ΔU=0\Delta U = 0, so Q=WQ = W.LEARN

2.10 ◆Entropy and the second law

Entropy SS measures the disorder of the particles in a system, in J K−1\text{J K}^{-1}. For the same substance, gas > liquid > solid; heating raises it.LEARN
ΔS=ΔQT\Delta S = \frac{\Delta Q}{T}BOOKLET
In ΔS=ΔQT\Delta S = \frac{\Delta Q}{T}, TT is constant and in kelvin. ΔQ\Delta Q is positive into the system and negative out of it.LEARN
S=kBln⁡ΩS = k_\text{B}\ln\OmegaBOOKLET
In an isolated system all microstates are equally likely, so the macrostate with the most microstates is the most probable and has the highest entropy.LEARN
Second law: the total entropy of an isolated system never decreases. Real processes are irreversible, so it increases. Clausius: thermal energy cannot flow by itself from cold to hot. Kelvin: no cyclic engine turns all the heat from one reservoir into work.LEARN
A system that is not isolated can lose entropy, but its surroundings gain at least as much: ΔSsystem+ΔSsurroundings≥0\Delta S_\text{system} + \Delta S_\text{surroundings} \ge 0.LEARN

2.11 ◆Gas processes and heat engines

In Q=ΔU+WQ = \Delta U + W, QQ is the heat supplied to the gas and WW is the work done by the gas. Work done on the gas (compression) is negative.LEARN
For an ideal gas. Isovolumetric: W=0W = 0, Q=ΔUQ = \Delta U. Isobaric: W=PΔVW = P\Delta V. Isothermal: ΔU=0\Delta U = 0, Q=WQ = W. Adiabatic: Q=0Q = 0, W=−ΔUW = -\Delta U.LEARN
PV53=constantPV^{\frac{5}{3}} = \text{constant}BOOKLET
Work done by a gas is the area under its P-V line, negative when the gas is compressed. Over a cycle, the net work is the enclosed area, done by the gas when the loop runs clockwise.LEARN
η=useful workinput energy\eta = \frac{\text{useful work}}{\text{input energy}}BOOKLET
For a heat engine, W=Qh−QcW = Q_\text{h} - Q_\text{c}, and the input energy is QhQ_\text{h}, the heat taken in.LEARN
ηCarnot=1−TcTh\eta_\text{Carnot} = 1 - \frac{T_\text{c}}{T_\text{h}}BOOKLET
The Carnot efficiency, with temperatures in kelvin, is the maximum for any heat engine between two reservoirs. Real engines are irreversible and always less efficient.LEARN

2.12Current, potential difference and emf

I=ΔqΔtI = \frac{\Delta q}{\Delta t}BOOKLET
V=WqV = \frac{W}{q}BOOKLET
1 A=1 C s−1\pu{1 A} = \pu{1 C s-1}, 1 V=1 J C−1\pu{1 V} = \pu{1 J C-1} and 1 A h=3600 C\pu{1 A h} = \pu{3600 C}. Electron charge: −e-e, with e=1.60⋅10−19 Ce = \pu{1.60e-19 C}.LEARN
Emf ε\varepsilon: energy transferred to electrical energy per unit charge by a source. Pd: electrical energy transferred to other forms per unit charge between two points. Terminal pd equals ε\varepsilon only when no current flows.LEARN
Conventional current flows from + to − outside the source; electrons in a metal drift the other way. Charge is never used up.LEARN
Ammeter in series (ideal: zero resistance). Voltmeter in parallel (ideal: infinite resistance).LEARN
Chemical cell: chemical to electrical, portable, limited store. Solar cell: light to electrical, renewable, no emissions, no output in the dark.LEARN

2.13Resistance, resistivity and Ohm's law

R=VIR = \frac{V}{I}BOOKLET
ρ=RAL\rho = \frac{RA}{L}BOOKLET
Conductors have many mobile charge carriers (free electrons in metals, ions in solutions); insulators have very few.LEARN
Resistance comes from carriers colliding with vibrating lattice ions. The collisions heat a resistor, and a hotter metal has a larger resistance.LEARN
Resistivity, in Ω m\Omega\ \text{m}, belongs to the material; for a round wire use A=πr2A = \pi r^{2} with rr in metres.LEARN
Ohm's law: for a metal conductor, I∝VI \propto V at constant temperature. Ohmic means a straight I–V line through the origin.LEARN
A filament lamp is non-ohmic: its resistance rises as it heats. At any point, R=VIR = \frac{V}{I}, not the gradient.LEARN

2.14Electrical power and circuits

P=IV=I2R=V2RP = IV = I^{2}R = \frac{V^{2}}{R}BOOKLET
Series: I=I1=I2=…V=V1+V2+…Rs=R1+R2+…\text{Series: } I = I_{1} = I_{2} = \dots \qquad V = V_{1} + V_{2} + \dots \qquad R_\text{s} = R_{1} + R_{2} + \dotsBOOKLET
Parallel: I=I1+I2+…V=V1=V2=…1Rp=1R1+1R2+…\text{Parallel: } I = I_{1} + I_{2} + \dots \qquad V = V_{1} = V_{2} = \dots \qquad \frac{1}{R_\text{p}} = \frac{1}{R_{1}} + \frac{1}{R_{2}} + \dotsBOOKLET
Resistors in parallel combine to less than the smallest of them. An ideal ammeter has zero resistance; an ideal voltmeter has infinite resistance.LEARN
ε=I(R+r)\varepsilon = I(R + r)BOOKLET
Terminal pd V=ε−IrV = \varepsilon - Ir. It equals the emf only when no current flows, and falls as the current rises.LEARN
NTC thermistor: resistance falls as temperature rises. LDR: resistance falls as light intensity rises. Potential divider: Vout=Vin R2R1+R2V_\text{out} = V_\text{in}\,\frac{R_2}{R_1 + R_2}; a potentiometer gives any output from zero to VinV_\text{in}.LEARN

Which method when

Any ratio or product with a temperature in it (Ek=32kBTE_\text{k} = \frac{3}{2}k_\text{B}T, σT4\sigma T^{4}, gas laws) → convert to kelvin first; a temperature change can stay in °C (2.1)LEARN
Energy to warm, melt or boil something → split the journey at each phase change: Q=mcΔTQ = mc\Delta T for each warming stage, Q=mLQ = mL for each change of phase at constant temperature, then add (2.2)LEARN
Hot and cold bodies mixed in an insulated container → energy lost by the hot body = energy gained by the cold body, with each ΔT\Delta T written as hotter minus colder; solve for the shared final temperature (2.2)LEARN
Steady rate of energy through a wall, window or rod → ΔQΔt=kAΔTΔx\frac{\Delta Q}{\Delta t} = kA\frac{\Delta T}{\Delta x} using the size of ΔT\Delta T and Δx\Delta x in metres (2.3)LEARN
Star's temperature, luminosity, radius or distance → Wien's law gives TT from the peak wavelength, b=L4πd2b = \frac{L}{4\pi d^{2}} links LL and dd, and L=σ(4πR2)T4L = \sigma(4\pi R^{2})T^{4} links LL, RR and TT (2.4)LEARN
Planet's equilibrium temperature → set the absorbed intensity (1−α)S4(1 - \alpha)\frac{S}{4} equal to the emitted eσT4e\sigma T^{4}; with an atmosphere, balance the surface alone: absorbed solar + radiated down by the atmosphere = emitted (2.5)LEARN
Fixed amount of gas moving between two states → P1V1T1=P2V2T2\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}, cancelling what stays constant; moles, molecules or mass in one state → PV=nRT=NkBTPV = nRT = Nk_\text{B}T in Pa, m³ and K (2.7, 2.8)LEARN
Molecular speed from pressure and density → P=13ρv2P = \frac{1}{3}\rho v^{2} gives vrmsv_\text{rms}; internal energy of an ideal monatomic gas → U=32nRT=32PVU = \frac{3}{2}nRT = \frac{3}{2}PV (2.8)LEARN
Resistance of a wire from its size, or after it is stretched or swapped for a thicker one → R=ρLAR = \frac{\rho L}{A} with A=πr2A = \pi r^{2} in m2\text{m}^{2}; change one factor at a time, and the area goes as the diameter squared (2.13)LEARN
Meter reading after a resistor, LDR or thermistor changes → follow the chain one link at a time: total resistance → current → pd across the fixed resistor (IRIR) or the lost volts (IrIr) → reading; use ε=I(R+r)\varepsilon = I(R + r) when the cell has internal resistance (2.14)LEARN

◆Which method when

Gas is heated, cooled, compressed or expands → write QQ (heat in), WW (work by the gas: PΔVP\Delta V, or the area under the P–V line when PP changes) and, for a monatomic ideal gas, ΔU=32nRΔT\Delta U = \frac{3}{2}nR\Delta T, each with its sign, then use Q=ΔU+WQ = \Delta U + W (2.9)LEARN
Heat transferred reversibly at a fixed temperature (melting, boiling, a large reservoir) → ΔS=ΔQT\Delta S = \frac{\Delta Q}{T} with TT in kelvin and ΔQ\Delta Q signed; to test whether a process can happen, add the entropy changes of every body involved and check the total is not negative (2.10)LEARN
Monatomic ideal gas compressed or expanded slowly (reversibly) with no heat flow → adiabatic: P1V153=P2V253P_1V_1^{\frac{5}{3}} = P_2V_2^{\frac{5}{3}} (not for a free expansion into a vacuum, where TT stays the same) for the new PP or VV, then PV=nRTPV = nRT for the temperature, and W=−ΔUW = -\Delta U (2.11)LEARN
Efficiency of an engine running round a gas cycle → η=WQh\eta = \frac{W}{Q_\text{h}}, with WW the area enclosed on the P–V diagram and QhQ_\text{h} the heat taken in on the stages where Q>0Q > 0 only; the most any engine can reach is 1−TcTh1 - \frac{T_\text{c}}{T_\text{h}}, in kelvin (2.11)LEARN
Follows the IB Physics guide (first assessment 2025). Not affiliated with the IB.