IB Physics HL · Paper practice

Paper 1 past paper questions

Every archived Physics HL Paper 1 question in one place. Practise them by topic, then sit a full paper under timed conditions.

Most-tested topicsElectricity, circuits and electromagnetism 306Mechanics and motion 299Waves, optics and imaging 259Atomic, quantum, nuclear and particle physics 247Thermal and energy systems 166Foundations, measurement and data 42

Sort questions

You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.

Unlock from $6/mo
24 free questions

2020 NovemberPaper 1Question 1Component P1TZ01 mark
Foundations, measurement and dataMeasurements, units and dimensions
Loading original question

1. Which quantity has the same units as those for energy stored per unit volume? A. Density B. Force C. Momentum D. Pressure

2020 NovemberPaper 1Question 2Component P1TZ01 mark
Mechanics and motionForces and dynamics
Loading original question

2. An object of mass 8.0 kg is falling vertically through the air. The drag force acting on the object is 60 N. What is the best estimate of the acceleration of the object? A. Zero B. 2.5 m s–2 C. 7.5 m s–2 D. 10 m s–2

2020 NovemberPaper 1Question 3Component P1TZ01 mark
Foundations, measurement and dataVectors, scalars and representation
Loading original question

3. A body is held in translational equilibrium by three coplanar forces of magnitude 3 N, 4 N and 5 N. Three statements about these forces are I. all forces are perpendicular to each other II. the forces cannot act in the same direction III. the vector sum of the forces is equal to zero. Which statements are true? A. I and II only B. I and III only C. II and III only D. I, II and III

2020 NovemberPaper 1Question 4Component P1TZ01 mark
Mechanics and motionWork, energy and power
Loading original question

4. An object of mass 1 kg is thrown downwards from a height of 20 m. The initial speed of the object is 6 m s–1. The object hits the ground at a speed of 20 m s–1. Assume g = 10 m s–2. What is the best estimate of the energy transferred from the object to the air as it falls? A. 6 J B. 18 J C. 182 J D. 200 J

2020 NovemberPaper 1Question 5Component P1TZ01 mark
Mechanics and motionWork, energy and power
Loading original question

5. A car is driven from rest along a straight horizontal road. The car engine exerts a constant driving force. Friction and air resistance are negligible. How does the power developed by the engine change with the distance travelled? A. Power does not change. B. Power decreases linearly. C. Power increases linearly. D. Power increases non-linearly.

2020 NovemberPaper 1Question 6Component P1TZ01 mark
Mechanics and motionMomentum, impulse and collisions
Loading original question

6. An object of mass 2m moving at velocity 3v collides with a stationary object of mass 4m. The objects stick together after the collision. What is the final speed and the change in total kinetic energy immediately after the collision? Final speed Change in total kinetic energy A. v 3 mv 2 B. v 6 mv 2 C. 2v 3 mv 2 D. 2v 6 mv 2

2020 NovemberPaper 1Question 7Component P1TZ01 mark
Thermal and energy systemsKinetic model and gas laws
Loading original question

7. What is not an assumption of the kinetic model of an ideal gas? A. Attractive forces between molecules are negligible. B. Collision duration is negligible compared with time between collisions. C. Molecules suffer negligible momentum change during wall collisions. D. Molecular volume is negligible compared with gas volume.

2020 NovemberPaper 1Question 8Component P1TZ01 mark
Thermal and energy systemsKinetic model and gas laws
Loading original question

Turn over 8. A substance in the gas state has a density about 1000 times less than when it is in the liquid state. The diameter of a molecule is d. What is the best estimate of the average distance between molecules in the gas state? A. d B. 10d C. 100d D. 1000d

2020 NovemberPaper 1Question 9Component P1TZ01 mark
Thermal and energy systemsKinetic model and gas laws
Loading original question

9. Two containers X and Y are maintained at the same temperature. X has volume 4 m3 and Y has volume 6 m3. They both hold an ideal gas. The pressure in X is 100 Pa and the pressure in Y is 50 Pa. The containers are then joined by a tube of negligible volume. What is the final pressure in the containers? A. 70 Pa B. 75 Pa C. 80 Pa D. 150 Pa

2020 NovemberPaper 1Question 10Component P1TZ01 mark
Waves, optics and imagingOscillations and simple harmonic motion
Loading original question

10. An object moves with simple harmonic motion. The acceleration of the object is A. constant. B. always directed away from the centre of the oscillation. C. a maximum at the centre of the oscillation. D. a maximum at the extremes of the oscillation.

2020 NovemberPaper 1Question 11Component P1TZ01 mark
Waves, optics and imagingWave model and characteristics
Loading original question

11. A travelling wave has a frequency of 500 Hz. The closest distance between two points on the wave that have a phase difference of 60 rad 3 π       is 0.050 m. What is the speed of the wave? A. 25 m s–1 B. 75 m s–1 C. 150 m s–1 D. 300 m s–1

2020 NovemberPaper 1Question 12Component P1TZ01 mark
Waves, optics and imagingOptics and imaging systems
Loading original question

12. Wavefronts travel from air to medium Q as shown. air Q 45° 30° Q 45° 30° What is the refractive index of Q? A. sin sin 30 45 o o B. sin sin 45 30 o o C. sin sin 45 60 o o D. sin sin 60 45 o o

2020 NovemberPaper 1Question 13Component P1TZ01 mark
Waves, optics and imagingStanding waves, resonance and Doppler effect
Loading original question

Turn over 13. The air in a pipe, open at both ends, vibrates in the second harmonic mode. Q P What is the phase difference between the motion of a particle at P and the motion of a particle at Q? A. 0 B. 2 π C. π D. 2π

2020 NovemberPaper 1Question 14Component P1TZ01 mark
Electricity, circuits and electromagnetismCurrent, resistance, circuits and heating
Loading original question

14. A metal wire has n free charge carriers per unit volume. The charge on the carrier is q. What additional quantity is needed to determine the current per unit area in the wire? A. Cross-sectional area of the wire B. Drift speed of charge carriers C. Potential difference across the wire D. Resistivity of the metal

2020 NovemberPaper 1Question 15Component P1TZ01 mark
Electricity, circuits and electromagnetismCurrent, resistance, circuits and heating
Loading original question

15. A cell of electromotive force (emf) E and zero internal resistance is in the circuit shown. R R W Z X Y I3 I1 I2 R R 2R U What is correct for loop WXYUW? A. E = 3I1R – I3R B. E = I3R – I2R C. E = I3R D. E = 2I2R – I3R

2020 NovemberPaper 1Question 16Component P1TZ01 mark
Electricity, circuits and electromagnetismCurrent, resistance, circuits and heating
Loading original question

16. What is the relationship between the resistivity ρ of a uniform wire, the radius r of the wire and the length l of the wire when its resistance is constant? A. ρ ∝ r 2l B. ρ ∝ rl 2 C. ρ ∝ 2 r l D. ρ ∝ 2 r l

2020 NovemberPaper 1Question 17Component P1TZ01 mark
Electricity, circuits and electromagnetismElectromagnetic induction and power systems
Loading original question

17. A power station generates 250 kW of power at a potential difference of 25 kV. The energy is transmitted through cables of total resistance 4.0 Ω. What is the power loss in the cables? A. 0.04 kW B. 0.4 kW C. 4 kW D. 40 kW

2020 NovemberPaper 1Question 18Component P1TZ01 mark
Electricity, circuits and electromagnetismCurrent, resistance, circuits and heating
Loading original question

Turn over 18. An electrical power supply has an internal resistance. It supplies a direct current I to an external circuit for a time t. What is the electromotive force (emf) of the power supply? A. total energy transferred to the whole circuit I ×t B. total power transferred to the whole circuit I ×t C. total energy transferred to the external circuit I ×t D. total power transferred to the external circuit I ×t

2020 NovemberPaper 1Question 19Component P1TZ01 mark
Electricity, circuits and electromagnetismMagnetic fields, forces and motion
Loading original question

19. A current in a wire lies between the poles of a magnet. What is the direction of the electromagnetic force on the wire? A. B. C. D. N S current

2020 NovemberPaper 1Question 20Component P1TZ01 mark
Mechanics and motionCircular motion and gravitation
Loading original question

20. Mass M is attached to one end of a string. The string is passed through a hollow tube and mass m is attached to the other end. Friction between the tube and string is negligible. r m M Mass m travels at constant speed v in a horizontal circle of radius r. What is mass M? A. mv r 2 B. mv 2rg C. mgv r 2 D. mv gr 2

Full Paper 1 past papers with mark schemes

Paper 1: quick facts

Which topics come up most in IB Physics HL Paper 1?

The most-tagged topics in IB Physics HL Paper 1 are Electricity, circuits and electromagnetism (306), Mechanics and motion (299) and Waves, optics and imaging (259), out of 1,338 past-paper questions from 2016-2026. These are archive counts, not a prediction, and a question can carry more than one topic.

Are the IB Physics HL Paper 1 questions free?

480 of the 1,338 IB Physics HL Paper 1 questions are free to practise. The other 858 need a plan for IB Physics HL, from $6 a month.

Do the IB Physics HL Paper 1 questions have answers?

Yes. Each IB Physics HL Paper 1 question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.