1. A company delivers packages to customers using a small unmanned aircraft. Rotating horizontal blades exert a force on the surrounding air. The air above the aircraft is initially stationary. aircraft package ground The air is propelled vertically downwards with speed v. The aircraft hovers motionless above the ground. A package is suspended from the aircraft on a string. The mass of the aircraft is 0.95 kg and the combined mass of the package and string is 0.45 kg. The mass of air pushed downwards by the blades in one second is 1.7 kg. (a) (i) State the value of the resultant force on the aircraft when hovering. [1] (ii) Outline, by reference to Newton’s third law, how the upward lift force on the aircraft is achieved. [2] (iii) Determine ν. State your answer to an appropriate number of significant figures. [3] (This question continues on the following page) Turn over (Question 1 continued) (iv) Calculate the power transferred to the air by the aircraft. [2] (b) The package and string are now released and fall to the ground. The lift force on the aircraft remains unchanged. Calculate the initial acceleration of the aircraft. [2]
IB Physics HL · Paper practice
Paper 2 past paper questions
Every archived Physics HL Paper 2 question in one place. Practise them by topic, then sit a full paper under timed conditions.
Most-tested topicsElectricity, circuits and electromagnetism 79Mechanics and motion 73Waves, optics and imaging 67Atomic, quantum, nuclear and particle physics 64Thermal and energy systems 52Relativity, astrophysics and cosmology 12
You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.
Unlock from $6/mo2. The Rotor is an amusement park ride that can be modelled as a vertical cylinder of inner radius R rotating about its axis. When the cylinder rotates sufficiently fast, the floor drops out and the passengers stay motionless against the inner surface of the cylinder. The diagram shows a person taking the Rotor ride. The floor of the Rotor has been lowered away from the person. axis of rotation R (a) Draw and label the free-body diagram for the person. [2] (This question continues on the following page) Turn over (Question 2 continued) (b) The person must not slide down the wall. Show that the minimum angular velocity ω of the cylinder for this situation is g R where µ is the coefficient of static friction between the person and the cylinder. [2] (c) The coefficient of static friction between the person and the cylinder is 0.40. The radius of the cylinder is 3.5 m. The cylinder makes 28 revolutions per minute. Deduce whether the person will slide down the inner surface of the cylinder. [3]
3. A sample of vegetable oil, initially in the liquid state, is placed in a freezer that transfers thermal energy from the sample at a constant rate. The graph shows how temperature T of the sample varies with time t. 0 230 240 250 260 270 280 290 300 5 10 15 20 25 30 35 40 45 50 60 55 T / K t / minutes The following data are available. Mass of the sample = 0.32 kg Specific latent heat of fusion of the oil = 130 kJ kg–1 Rate of thermal energy transfer = 15 W (a) (i) Calculate the thermal energy transferred from the sample during the first 30 minutes. [1] (ii) Estimate the specific heat capacity of the oil in its liquid phase. State an appropriate unit for your answer. [2] (This question continues on the following page) Turn over (Question 3 continued) (b) The sample begins to freeze during the thermal energy transfer. Explain, in terms of the molecular model of matter, why the temperature of the sample remains constant during freezing. [3] (c) Calculate the mass of the oil that remains unfrozen after 60 minutes. [2]
4. Two loudspeakers, A and B, are driven in phase and with the same amplitude at a frequency of 850 Hz. Point P is located 22.5 m from A and 24.3 m from B. The speed of sound is 340 m s–1. 22.5 m A P B 24.3 m (a) Deduce that a minimum intensity of sound is heard at P. [4] (This question continues on the following page) Turn over (Question 4 continued) (b) A microphone moves along the line from P to Q. PQ is normal to the line midway between the loudspeakers. A P Q direction of travel B The intensity of sound is detected by the microphone. Predict the variation of detected intensity as the microphone moves from P to Q. [2] (c) When both loudspeakers are operating, the intensity of sound recorded at Q is I0. Loudspeaker B is now disconnected. Loudspeaker A continues to emit sound with unchanged amplitude and frequency. The intensity of sound recorded at Q changes to IA. Estimate I I A 0 . [2] (This question continues on the following page) (Question 4 continued) (d) In another experiment, loudspeaker A is stationary and emits sound with a frequency of 850 Hz. The microphone is moving directly away from the loudspeaker with a constant speed v. The frequency of sound recorded by the microphone is 845 Hz. (i) Explain why the frequency recorded by the microphone is lower than the frequency emitted by the loudspeaker. [2] (ii) Calculate v. [2]
Turn over 5. The graph shows how current I varies with potential difference V across a component X. 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 4.5 V / V 0 10 20 30 40 50 60 70 80 90 I / mA (a) Outline why component X is considered non-ohmic. [1] (This question continues on the following page) (Question 5 continued) (b) Component X and a cell of negligible internal resistance are placed in a circuit. A variable resistor R is connected in series with component X. The ammeter reads 20 mA. 4.0 V A R X (i) Determine the resistance of the variable resistor. [3] (ii) Calculate the power dissipated in the circuit. [1] (This question continues on the following page) Turn over (Question 5 continued) (c) Component X and the cell are now placed in a potential divider circuit. 4.0 V X A P Q S (i) State the range of current that the ammeter can measure as the slider S of the potential divider is moved from Q to P. [1] (ii) Slider S of the potential divider is positioned so that the ammeter reads 20 mA. Explain, without further calculation, any difference in the power transferred by the potential divider arrangement over the arrangement in (b). [3]
6. (a) One possible fission reaction of uranium-235 (U-235) is 235 2 9 U + 1 0 n → 140 4 5 Xe + 94 8 3 Sr + 21 0 n The following data are available. Mass of one atom of U-235 = 235 u Binding energy per nucleon for U-235 = 7.59 MeV Binding energy per nucleon for Xe-140 = 8.29 MeV Binding energy per nucleon for Sr-94 = 8.59 MeV (i) State what is meant by binding energy of a nucleus. [1] (ii) Outline why quantities such as atomic mass and nuclear binding energy are often expressed in non-SI units. [1] (iii) Show that the energy released in the reaction is about 180 MeV. [1] (b) A nuclear power station uses U-235 as fuel. Assume that every fission reaction of U-235 gives rise to 180 MeV of energy. (i) Estimate, in J kg–1, the specific energy of U-235. [2] (This question continues on the following page) Turn over (Question 6 continued) (ii) The power station has a useful power output of 1.2 GW and an efficiency of 36 %. Determine the mass of U-235 that undergoes fission in one day. [2] (iii) The specific energy of fossil fuel is typically 30 MJ kg–1. Suggest, with reference to your answer to (b)(i), one advantage of U-235 compared with fossil fuels in a power station. [1] (c) A sample of waste produced by the reactor contains 1.0 kg of strontium-94 (Sr-94). Sr-94 is radioactive and undergoes beta-minus (β–) decay into a daughter nuclide X. The reaction for this decay is 94 8 3 Sr → X + ν̅ e + e. (i) Write down the proton number of nuclide X. [1] (This question continues on the following page) (Question 6 continued) The graph shows the variation with time of the mass of Sr-94 remaining in the sample. 0 25 50 75 100 125 150 175 200 225 time / s 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 mass / kg (ii) State the half-life of Sr-94. [1] (iii) Calculate the mass of Sr-94 remaining in the sample after 10 minutes. [2]
Turn over 7. A vertical solid cylinder of uniform cross-sectional area A floats in water. The cylinder is partially submerged. When the cylinder floats at rest, a mark is aligned with the water surface. The cylinder is pushed vertically downwards so that the mark is a distance x below the water surface. x water surface cylinder pushed downwards cylinder floating at rest mark At time t = 0 the cylinder is released. The resultant vertical force F on the cylinder is related to the displacement x of the mark by F = - ρAgx where ρ is the density of water. (a) Outline why the cylinder performs simple harmonic motion when released. [1] (b) The mass of the cylinder is 118 kg and the cross-sectional area of the cylinder is 2.29 × 10-1 m2. The density of water is 1.03 × 103 kg m-3. Show that the angular frequency of oscillation of the cylinder is about 4.4 rad s–1. [2] (This question continues on the following page) (Question 7 continued) (c) The cylinder was initially pushed down a distance x = 0.250 m. (i) Determine the maximum kinetic energy Ekmax of the cylinder. [2] (ii) Draw, on the axes, the graph to show how the kinetic energy of the cylinder varies with time during one period of oscillation T. [2] time kinetic energy Ekmax 0 0 T
Turn over 8. The diagram shows the electric field lines of a positively charged conducting sphere of radius R and charge Q. A Q B Points A and B are located on the same field line. (a) Explain why the electric potential decreases from A to B. [2] (b) Draw, on the axes, the variation of electric potential V with distance r from the centre of the sphere. [2] r R V 0 0 (This question continues on the following page) (Question 8 continued) (c) A proton is placed at A and released from rest. The magnitude of the work done by the electric field in moving the proton from A to B is 1.7 × 10-16 J. Point A is at a distance of 5.0 × 10-2 m from the centre of the sphere. Point B is at a distance of 1.0 × 10-1 m from the centre of the sphere. (i) Calculate the electric potential difference between points A and B. [1] (ii) Determine the charge Q of the sphere. [2] (d) The concept of potential is also used in the context of gravitational fields. Suggest why scientists developed a common terminology to describe different types of fields. [1]
Turn over 9. The diagram shows an alternating current generator with a rectangular coil rotating at a constant frequency in a uniform magnetic field. sliding contacts axis of rotation (a) Explain, by reference to Faraday’s law of induction, how an electromotive force (emf) is induced in the coil. [3] (This question continues on the following page) (Question 9 continued) (b) The graph shows how the generator output voltage V varies with time t. 0 20 2 4 6 8 10 12 14 18 16 t / ms 50 25 75 100 – 50 – 25 – 75 – 100 V / kV 0 Electrical power produced by the generator is delivered to a consumer some distance away. (i) The average power output of the generator is 8.5 × 105 W. Calculate the root mean square (rms) value of the generator output current. [2] (This question continues on the following page) Turn over (Question 9 continued) (ii) The voltage output from the generator is stepped up before transmission to the consumer. Estimate the factor by which voltage has to be stepped up in order to reduce power loss in the transmission line by a factor of 2.5 × 102. [1] (iii) The frequency of the generator is doubled with no other changes being made. Draw, on the axes, the variation with time of the voltage output of the generator. [2]
10. The de Broglie wavelength λ of a particle accelerated close to the speed of light is approximately hc E where E is the energy of the particle. A beam of electrons of energy 4.2 × 108 eV is produced in an accelerator. (a) Show that the wavelength of an electron in the beam is about 3 × 10-15 m. [1] (b) The electron beam is used to study the nuclear radius of carbon-12. The beam is directed from the left at a thin sample of carbon-12. A detector is placed at an angle θ relative to the direction of the incident beam. electron beam thin sample of carbon-12 detector θ The graph shows the variation of the intensity of electrons with θ. There is a minimum of intensity for θ = θ0. θ θ0 intensity of electrons (This question continues on the following page) (Question 10 continued) (i) Discuss how the results of the experiment provide evidence for matter waves. [2] (ii) The accepted value of the diameter of the carbon-12 nucleus is 4.94 × 10-15 m. Estimate the angle θ0 at which the minimum of the intensity is formed. [2] (iii) Outline why electrons with energy of approximately 107 eV would be unsuitable for the investigation of nuclear radii. [2] (c) Experiments with many nuclides suggest that the radius of a nucleus is proportional to A 1 3 , where A is the number of nucleons in the nucleus. Show that the density of a nucleus remains approximately the same for all nuclei. [2]
1. A girl rides a bicycle that is powered by an electric motor. A battery transfers energy to the electric motor. The emf of the battery is 16 V and it can deliver a charge of 43 kC when discharging completely from a full charge. (a) The maximum speed of the girl on a horizontal road is 7.0 m s–1 with energy from the battery alone. The maximum distance that the girl can travel under these conditions is 20 km. (i) Show that the time taken for the battery to discharge is about 3 × 103 s. [1] (ii) Deduce that the average power output of the battery is about 240 W. [2] (iii) Friction and air resistance act on the bicycle and the girl when they move. Assume that all the energy is transferred from the battery to the electric motor. Determine the total average resistive force that acts on the bicycle and the girl. [2] (This question continues on the following page) Turn over (Question 1 continued) (b) The bicycle and the girl have a total mass of 66 kg. The girl rides up a slope that is at an angle of 3.0° to the horizontal. 3.0° (i) Calculate the component of weight for the bicycle and girl acting down the slope. [1] (ii) The battery continues to give an output power of 240 W. Assume that the resistive forces are the same as in (a)(iii). Calculate the maximum speed of the bicycle and the girl up the slope. [2] (c) On another journey up the slope, the girl carries an additional mass. Explain whether carrying this mass will change the maximum distance that the bicycle can travel along the slope. [2] (This question continues on the following page) M19/4/PHYSI/HP2/ENG/TZ1/XX (Question 1 continued) (d) The bicycle has a meter that displays the current and the terminal potential difference (pd) for the battery when the motor is running. The diagram shows the meter readings at one instant. The emf of the cell is 16 V. 12 V 6.5 A pd current Determine the internal resistance of the battery. [2] (e) The battery is made from an arrangement of 10 identical cells as shown. Calculate (i) the emf of one cell. [1] (ii) the internal resistance of one cell. [2] Turn over M19/4/PHYSI/HP2/ENG/TZ1/XX M19/4/PHYSI/HP2/ENG/TZ1/XX
1. A student strikes a tennis ball that is initially at rest so that it leaves the racquet at a speed of 64 m s–1. The ball has a mass of 0.058 kg and the contact between the ball and the racquet lasts for 25 ms. (a) Calculate the (i) average force exerted by the racquet on the ball. [2] (ii) average power delivered to the ball during the impact. [2] (b) The student strikes the tennis ball at point P. The tennis ball is initially directed at an angle of 7.00° to the horizontal. diagram not to scale 7.00° 2.80 m 11.9 m P 0.910 m net ground 64 m s−1 The following data are available. Height of P = 2.80 m Distance of student from net = 11.9 m Height of net = 0.910 m Initial speed of tennis ball = 64 m s-1 (This question continues on the following page) (Question 1 continued) (i) Calculate the time it takes the tennis ball to reach the net. [2] (ii) Show that the tennis ball passes over the net. [3] (iii) Determine the speed of the tennis ball as it strikes the ground. [2] (This question continues on the following page) Turn over M19/4/PHYSI/HP2/ENG/TZ2/XX (Question 1 continued) (c) The student models the bounce of the tennis ball to predict the angle θ at which the ball leaves a surface of clay and a surface of grass. surface sliding θ The model assumes • during contact with the surface the ball slides. • the sliding time is the same for both surfaces. • the sliding frictional force is greater for clay than grass. • the normal reaction force is the same for both surfaces. Predict for the student’s model, without calculation, whether θ is greater for a clay surface or for a grass surface. [3] M19/4/PHYSI/HP2/ENG/TZ2/XX M19/4/PHYSI/HP2/ENG/TZ2/XX
1. The graph shows the variation with time t of the horizontal force F exerted on a tennis ball by a racket. 150 100 50 0 0 10 20 30 40 F / N t / ms The tennis ball was stationary at the instant when it was hit. The mass of the tennis ball is 5.8 × 10–2 kg. The area under the curve is 0.84 N s. (a) Calculate the speed of the ball as it leaves the racket. [2] (b) Show that the average force exerted on the ball by the racket is about 50 N. [2] (This question continues on the following page) (Question 1 continued) (c) Determine, with reference to the work done by the average force, the horizontal distance travelled by the ball while it was in contact with the racket. [3] (d) Draw a graph to show the variation with t of the horizontal speed v of the ball while it was in contact with the racket. Numbers are not required on the axes. [2] v t N19/4/PHYSI/HP2/ENG/TZ0/XX
2. (a) A beam of electrons each of de Broglie wavelength 2.4 × 10–15 m is incident on a thin film of silicon-30 ( ) 30 14Si . The variation in the electron intensity of the beam with scattering angle is shown. 0 5 10 15 20 25 30 35 scattering angle / degrees electron intensity (i) Use the graph to show that the nuclear radius of silicon-30 is about 4 fm. [3] (ii) Estimate, using the result from (a)(i), the nuclear radius of thorium-232 ( ) 232 90Th . [2] (This question continues on the following page) (Question 2 continued) (iii) Suggest one reason why a beam of electrons is better for investigating the size of a nucleus than a beam of alpha particles of the same energy. [1] (iv) Outline why deviations from Rutherford scattering are observed when high-energy alpha particles are incident on nuclei. [2] (This question continues on the following page) Turn over M19/4/PHYSI/HP2/ENG/TZ1/XX (Question 2 continued) (b) Silicon-30 ( ) 30 14Si can be formed from phosphorus-30 ( ) 30 15P by a process of beta-plus decay. (i) Write down the nuclear equation that represents this reaction. [2] (ii) Sketch the Feynman diagram that represents this reaction. The diagram has been started for you. [3] u d u time (iii) Energy is transferred to a hadron in an attempt to separate its quarks. Describe the implications of quark confinement for this situation. [2] (This question continues on the following page) M19/4/PHYSI/HP2/ENG/TZ1/XX (Question 2 continued) (c) The Standard Model was accepted by many scientists before the observation of the Higgs boson was made. Outline why it is important to continue research into a topic once a scientific model has been accepted by the scientific community. [1] Turn over M19/4/PHYSI/HP2/ENG/TZ1/XX
2. A container of volume 3.2 × 10-6 m3 is filled with helium gas at a pressure of 5.1 × 105 Pa and temperature 320 K. Assume that this sample of helium gas behaves as an ideal gas. (a) The mass of a helium atom is 6.6 × 10-27 kg. Estimate the average speed of the helium atoms in the container. [2] (b) Show that the number of helium atoms in the container is 4 × 1020. [2] (This question continues on the following page) Turn over (Question 2 continued) (c) A helium atom has a volume of 4.9 × 10-31 m3. (i) Calculate the ratio volume of helium atoms volume of helium gas . [1] (ii) Discuss, by reference to the kinetic model of an ideal gas and the answer to (c)(i), whether the assumption that helium behaves as an ideal gas is justified. [2] M19/4/PHYSI/HP2/ENG/TZ2/XX
2. The air in a kitchen has pressure 1.0 × 105 Pa and temperature 22°C. A refrigerator of internal volume 0.36 m3 is installed in the kitchen. (a) With the door open the air in the refrigerator is initially at the same temperature and pressure as the air in the kitchen. Calculate the number of molecules of air in the refrigerator. [2] (This question continues on the following page) Turn over (Question 2 continued) (b) The refrigerator door is closed. The air in the refrigerator is cooled to 5.0°C and the number of air molecules in the refrigerator stays the same. (i) Determine the pressure of the air inside the refrigerator. [2] (ii) The door of the refrigerator has an area of 0.72 m2. Show that the minimum force needed to open the refrigerator door is about 4 kN. [2] (iii) Comment on the magnitude of the force in (b)(ii). [2] N19/4/PHYSI/HP2/ENG/TZ0/XX N19/4/PHYSI/HP2/ENG/TZ0/XX
3. A beam of microwaves is incident normally on a pair of identical narrow slits S1 and S2. When a microwave receiver is initially placed at W which is equidistant from the slits, a maximum in intensity is observed. The receiver is then moved towards Z along a line parallel to the slits. Intensity maxima are observed at X and Y with one minimum between them. W, X and Y are consecutive maxima. (a) Explain why intensity maxima are observed at X and Y. [2] The distance from S1 to Y is 1.243 m and the distance from S2 to Y is 1.181 m. (b) Determine the frequency of the microwaves. [3] (This question continues on the following page) Not to scale (Question 3 continued) (c) Outline one reason why the maxima observed at W, X and Y will have different intensities from each other. [1] (d) The microwaves emitted by the transmitter are horizontally polarized. The microwave receiver contains a polarizing filter. When the receiver is at position W it detects a maximum intensity. microwave transmitter microwave receiver The receiver is then rotated through 180° about the horizontal dotted line passing through the microwave transmitter. Sketch a graph on the axes provided to show the variation of received intensity with rotation angle. [2] 90˚ 180˚ 0 0 received intensity rotation angle Turn over M19/4/PHYSI/HP2/ENG/TZ1/XX M19/4/PHYSI/HP2/ENG/TZ1/XX
3. The diagram shows the direction of a sound wave travelling in a metal sheet. diagram not to scale P 54° metal sheet wave direction Q air normal (a) Particle P in the metal sheet performs simple harmonic oscillations. When the displacement of P is 3.2 µm the magnitude of its acceleration is 7.9 m s-2. Calculate the magnitude of the acceleration of P when its displacement is 2.3 µm. [2] (b) The wave is incident at point Q on the metal–air boundary. The wave makes an angle of 54° with the normal at Q. The speed of sound in the metal is 6010 m s–1 and the speed of sound in air is 340 m s–1. Calculate the angle between the normal at Q and the direction of the wave in air. [2] (This question continues on the following page) Turn over (Question 3 continued) (c) The frequency of the sound wave in the metal is 250 Hz. Determine the wavelength of the wave in air. [1] (d) The sound wave in air in (c) enters a pipe that is open at both ends. The diagram shows the displacement, at a particular time T, of the standing wave that is set up in the pipe. M displacement to the right displacement to the left A particular air molecule has its equilibrium position at the point labelled M. On the diagram, at time T, (i) draw an arrow to indicate the acceleration of this molecule. [1] (ii) label with the letter C a point in the pipe that is at the centre of a compression. [1] (This question continues on the following page) M19/4/PHYSI/HP2/ENG/TZ2/XX (Question 3 continued) (e) Sound of frequency f = 2500 Hz is emitted from an aircraft that moves with speed v = 280 m s–1 away from a stationary observer. The speed of sound in still air is c = 340 m s–1. diagram not to scale stationary observer Calculate the (i) frequency heard by the observer. [2] (ii) wavelength measured by the observer. [1] Turn over M19/4/PHYSI/HP2/ENG/TZ2/XX M19/4/PHYSI/HP2/ENG/TZ2/XX
3. The solid line in the graph shows the variation with distance x of the displacement y of a travelling wave at t = 0. The dotted line shows the wave 0.20 ms later. The period of the wave is longer than 0.20 ms. 6 4 2 0 – 2 – 4 – 6 0.2 0.0 0.4 0.8 1.0 0.6 y / cm x / m P Q (a) (i) Calculate, in m s–1, the speed for this wave. [1] (ii) Calculate, in Hz, the frequency for this wave. [2] (b) The graph also shows the displacement of two particles, P and Q, in the medium at t = 0. State and explain which particle has the larger magnitude of acceleration at t = 0. [2] (This question continues on the following page) Turn over (Question 3 continued) (c) One end of a string is attached to an oscillator and the other is fixed to a wall. When the frequency of the oscillator is 360 Hz the standing wave shown is formed on the string. 2.1 m oscillator Point X (not shown) is a point on the string at a distance of 10 cm from the oscillator. (i) State the number of all other points on the string that have the same amplitude and phase as X. [1] (ii) The frequency of the oscillator is reduced to 120 Hz. On the diagram, draw the standing wave that will be formed on the string. [1] 2.1 m oscillator N19/4/PHYSI/HP2/ENG/TZ0/XX
4. A solid cylinder of height h and density ρ rests on a flat surface. h (a) Show that the pressure pC exerted by the cylinder on the surface is given by pC = ρgh. [2] (b) A tube of constant circular cross-section, sealed at one end, contains an ideal gas trapped by a cylinder of mercury of length 0.035 m. The whole arrangement is in the Earth’s atmosphere. The density of mercury is 1.36 × 104 kg m–3. 0.035 m 0.190 m sealed end trapped gas mercury When the mercury is above the gas column the length of the gas column is 0.190 m. (i) Show that o m ( ) 0.190 nRT p p A + × = where po = atmospheric pressure pm = pressure due to the mercury column T = temperature of the trapped gas n = number of moles of the trapped gas A = cross-sectional area of the tube. [2] (This question continues on the following page) (Question 4 continued) (ii) The tube is slowly rotated until the gas column is above the mercury. diagram not to scale 0.208 m 0.035 m mercury trapped gas sealed end The length of the gas column is now 0.208 m. The temperature of the trapped gas does not change during the process. Determine the atmospheric pressure. Give a suitable unit for your answer. [4] (iii) Outline why the gas particles in the tube hit the mercury surface less often after the tube has been rotated. [1] Turn over M19/4/PHYSI/HP2/ENG/TZ1/XX
Paper 2: quick facts
Which topics come up most in IB Physics HL Paper 2?
The most-tagged topics in IB Physics HL Paper 2 are Electricity, circuits and electromagnetism (79), Mechanics and motion (73) and Waves, optics and imaging (67), out of 304 past-paper questions from 2016-2026. These are archive counts, not a prediction, and a question can carry more than one topic.
Are the IB Physics HL Paper 2 questions free?
113 of the 304 IB Physics HL Paper 2 questions are free to practise. The other 191 need a plan for IB Physics HL, from $6 a month.
Do the IB Physics HL Paper 2 questions have answers?
Yes. Each IB Physics HL Paper 2 question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.