Motion, forces and energy
13 lessons · 1 Extended only · 445 past-paper questions in the 0625 Extended papers
● CORE AND EXTENDED
12 lessonsEvery experiment starts with a good measurement. Use a ruler for lengths, a measuring cylinder for volumes, and a clock, stopwatch or digital timer for times. To measure something very small or very quick, measure many of them together and divide. Extended adds scalars and vectors, and how to combine two vectors that act at right angles.
Speed is how far something travels each second, and velocity is speed in a given direction. Graphs of distance or speed against time show how an object moves: the gradient of a distance–time graph gives the speed, and the area under a speed–time graph gives the distance travelled. Near the Earth, with air resistance ignored, falling objects speed up at about 9.8 m/s². Extended adds acceleration, deceleration and terminal velocity.
Mass is how much matter an object contains, in kilograms. Weight is the pull of gravity on that mass: a force, in newtons. The gravitational field strength g links them: near the Earth, every kilogram weighs about 9.8 N. Extended adds why weight changes from place to place while mass doesn't.
Density tells you how much mass is packed into each unit of volume: ρ = m/V. You find it from a mass on a balance and a volume from a measuring cylinder, a ruler or the displacement method, and comparing densities tells you whether something floats. Extended adds which of two liquids floats on the other.
A force can stretch, squash or bend an object, and it can change how the object moves. When the forces on an object balance, it stays at rest or keeps moving steadily in a straight line; a resultant force changes its speed or direction. Extended adds the spring constant, F = ma and motion in a circle.
A force can turn an object about a pivot. Its turning effect, the moment, is the force times its perpendicular distance from the pivot. A beam balances when the clockwise and anticlockwise moments about the pivot are equal, and an object is in equilibrium only when both the forces and the moments balance.
Every part of an object has weight, but all of it acts as if it pulls down at one point: the centre of gravity. Learn to find it for a flat shape with a plumb line, and why a low centre of gravity and a wide base make an object hard to knock over.
Energy is held in seven energy stores and moves between them when a force does work, a current flows, something is heated or a wave travels. Energy is never created or destroyed, so the total stays the same. Extended adds Eₖ = 1/2mv², ΔEₚ = mgΔh and Sankey diagrams.
Work done is the energy transferred when a force moves an object, or when an electric current flows. For a force, multiply the force by how far the object moves in the direction of the force: W = Fd. The answer is in joules, the same unit as energy.
Most power stations heat water into steam, which spins a turbine and a generator. Wind, water and sunlight can do the job without a boiler. You compare resources by whether they run out, when and where they work, how much they give and what harm they do, and by how much of the input energy ends up useful.
Power tells you how fast energy is transferred: the work done or energy transferred each second. Use P = W/t or P = ΔE/t, with the energy in joules and the time in seconds, and the answer is in watts (W).
Pressure tells you how concentrated a force is: the force on each unit of area, p = F/A. The same push on a small area gives a big pressure, which is why a sharp knife cuts and wide snowshoes help you sink less. In a liquid, the pressure gets bigger the deeper you go and the denser the liquid is. Extended adds the equation Δp = ρg Δh.
◆ EXTENDED ONLY
1 lessonsMomentum is mass times velocity: the heavier and faster something moves, the harder it is to stop. A force acting for a time changes momentum, and the resultant force is the rate of change of momentum. In a collision or explosion the total momentum stays the same, as long as no outside resultant force acts.