Turning effect of forces
In a minute
A can turn an object about a pivot. Its turning effect, the , is the force times its perpendicular distance from the pivot. A beam balances when the clockwise and anticlockwise moments about the pivot are equal, and an object is in only when both the forces and the moments balance.
You'll be able to
- Describe a moment as the turning effect of a force, with everyday examples.
- Calculate a moment from a force and its perpendicular distance from the pivot, and rearrange to find the force or the distance.
- Use the to balance a beam with one force on each side of the pivot.
- State the two conditions for an object to be in equilibrium.
- Use the principle of moments with more than one force on a side, including the weight of the beam itself.
- Describe an experiment that shows a balanced object has no resultant moment on it.
Before you start2 quick questions on what this builds on
Revise first: 1.5.1 Effects of forces
The moment of a force
Push a door near its hinges and it hardly moves. Push the same door at the handle, far from the hinges, and it swings open easily. The same force has a bigger turning effect when it acts further from the pivot.
The pivot is the point an object turns about: the hinges of a door, the nut a spanner grips, the middle of a see-saw. Other everyday examples are a wheelbarrow, a bottle opener and the pedals of a bike.
Moment is measured in newton metres, . If the distance is in cm, the moment comes out in . Each moment turns either clockwise or anticlockwise.
Perpendicular means at right angles. When you push at right angles to a spanner, is the distance along the spanner. If you push along the handle, the line of the force passes through the pivot. Then , and the force has no turning effect at all.
Try it first, then reveal one step at a time.
- The force is at right angles to the horizontal crank, so the perpendicular distance is .
- Write the equation: moment force perpendicular distance from the pivot.
- Substitute: moment .
- The data have 2 significant figures, so give 2.
Try it first, then reveal one step at a time.
- The moment is in , so change the distance to metres: .
- Rearrange moment to get .
- Substitute: .
- Check: . A longer wrench would need a smaller force.
Balancing a beam and equilibrium
On a see-saw, the child on the left turns it anticlockwise and the child on the right turns it clockwise. It balances when the two turning effects are the same size.
With one force on each side of the pivot, on a beam that is light or pivoted at its centre, this becomes . A smaller force can balance a bigger one if it acts further from the pivot.
Try it first, then reveal one step at a time.
- Its own weight acts through the pivot, because the pivot is at its centre. So that weight has no moment.
- Principle of moments: clockwise moment anticlockwise moment.
- Brother (clockwise) and Maya (anticlockwise): .
- Rearrange: . He is lighter, so he sits further out.
Try it first, then reveal one step at a time.
- The rule's weight acts at the mark, right at the pivot, so it has no moment. Distances are measured from the pivot, not from the end of the rule. The weight is from the pivot.
- Anticlockwise moment: .
- Clockwise moment: . Set them equal: .
- So : the weight hangs at the mark.
A balanced beam doesn't move in any way. So it needs two things. The forces balance: the pivot pushes up as hard as the weights pull down, so there is no resultant force and the beam doesn't start to move. The moments balance, so it doesn't start to turn.
Several forces, and testing the principle Extended only
With more than one force on a side, find the moment of each force about the pivot. Add all the clockwise moments, and add all the anticlockwise moments. In equilibrium the two totals are equal.
Try it first, then reveal one step at a time.
- Anticlockwise: .
- Clockwise: .
- Principle of moments: , so .
- .
A uniform beam's own weight acts at the middle of the beam. If the beam is not pivoted there, its weight has a moment too.
Try it first, then reveal one step at a time.
- Set up: where the pivot goes, and what hangs on each side.
- Measure: when to take readings, and which distances.
- Calculate and conclude: compare the two totals.
- Balance a uniform metre rule on a pivot at its 50 cm mark, so its own weight has no moment. Hang two known weights from loops of thread on one side of the pivot and one known weight on the other side. Slide the weights until the rule balances level. Read the distance of each thread from the pivot on the rule's scale. Calculate each moment as weight × distance. Add the anticlockwise moments and add the clockwise moments. The two totals are equal within experimental accuracy, so there is no resultant moment. Repeat with different weights and positions.
Common mistakes
- Multiplying the moment by the distance to find a force. Divide: .
- Using a scale reading as the distance. Measure every distance from the pivot.
- Mixing cm and m. Use one unit for every distance; a moment with distances in cm is in N cm.
- Saying a beam is in equilibrium because the forces balance. The moments must balance too.
- Confusing moment with work done. Both multiply a force by a distance, but a moment uses the perpendicular distance from a pivot.
- Extended: leaving out a uniform beam's own weight when the pivot is not at its centre, or adding a moment for it when the pivot is at its centre.
Exam tips
- "State the principle of moments": give the condition (an object in equilibrium) and both sides: total clockwise moment equals total anticlockwise moment about the same point.
- "Calculate": write the moment on each side as force × perpendicular distance from the pivot, set them equal, then solve. Give the unit.
- "State" the conditions for equilibrium: both of them, no resultant force and no resultant moment.
- "Describe" an experiment (Extended): say what you set up, what you measure, how you calculate the moments, and what result shows there is no resultant moment.
Key takeaways
Practise this
25 past-paper questions on Turning effect of forces in the 0625 Extended bank, each with a mark scheme and a worked explanation.