1.7.2 · CorePaper 1Paper 2Paper 3Paper 4

Work

In a minute

is the transferred when a moves an object, or when an electric current flows. For a force, multiply the force by how far the object moves in the direction of the force: W=FdW = Fd. The answer is in joules, the same unit as energy.

You'll be able to

  • Explain that the work done by a force or by an electric current equals the energy it transfers.
  • Describe everyday events as mechanical or electrical work, naming the involved.
  • Calculate work done with W=FdW = Fd, with dd measured along the direction of the force.
  • Use W=ΔEW = \Delta E to find a force, a distance or an energy change.
Before you start3 quick questions on what this builds on
Check yourself
A small suitcase has a mass of 3.2 kg3.2\ \text{kg}. What is its weight, in N? Use g=9.8 N/kgg = 9.8\ \text{N/kg} and give 2 significant figures.
Check yourself
A box slides to the right across a rough floor. Which way does act on the box?
Check yourself
A book is lifted from the floor onto a high shelf. Which energy store of the book increases?

Revise first: 1.3 Mass and weight, 1.5.1 Effects of forces and 1.7.1 Energy

Work done is energy transferred

In 1.7.1 you saw energy move between . Two ways it moves are called working. A that moves an object does mechanical work. An electric current does electrical work.

Mechanical work: you push a wheelbarrow and it speeds up, so energy goes from the chemical store in your muscles to the wheelbarrow's kinetic store. An apple falls from a tree: its weight does work, moving energy from its store to its kinetic store.

Electrical work: a battery drives a current through an electric motor. The current does electrical work, transferring energy from the battery's chemical store. The motor can then do mechanical work, such as winding up a load.

Work done against heats things. Slide a book across a table at a steady speed: the work your push does ends up in the internal (thermal) stores of the book and table, which get slightly warmer.

Worked exampleA sledge slides across flat snow and slows down until it stops. Describe the energy transfer, and say how the energy is transferred.

Try it first, then reveal one step at a time.

  1. Name the force that slows the sledge.
Check yourself
Which of these is an example of electrical work being done?
Check yourself
A ball falls from a shelf. Air resistance is too small to matter. How does the energy gained by its kinetic store compare with the work done on it by its weight?

Calculating work done

The work a force does depends on two things: how big the force is, and how far the object moves in the direction of the force.

Learn this
W=Fd=ΔEW = Fd = \Delta E

WW is the work done in joules (J), FF is the force in newtons (N), and dd is how far the object moves in the direction of the force, in metres (m). ΔE\Delta E is the energy transferred, in J.

So 1 J1\ \text{J} is the work done when a force of 1 N1\ \text{N} moves an object 1 m1\ \text{m} in the direction of the force. That is why 1 J=1 N m1\ \text{J} = 1\ \text{N m}. A moment (1.5.2) is also in N m, but it is not an energy, so never give a moment in J.

Careful: WW also stands for weight. Read the question to see which one it means.

Two side views. Left, pushing along the floor: a crate starts at the left, shown dashed, and ends further right, shown solid. A force arrow labelled force F points to the right from the crate. Below the floor, an arrow to the right from the starting position to the final position is labelled distance moved d. Right, lifting at a steady speed: a box starts on the floor, shown dashed, and ends higher up, shown solid. A force arrow labelled lifting force F points straight up from the box. A vertical arrow beside it, from the floor up to the bottom of the raised box, is labelled height gained d. In both views the force and the distance point the same way. Pushing along the floor force F distance moved d Lifting at a steady speed lifting force F height gained d
Use the distance moved in the same direction as the force.
Worked exampleA removal worker pushes a wardrobe across a floor with a force of 180 N180\ \text{N}. It slides 3.5 m3.5\ \text{m} the same way as the push. Calculate how much work the push does.

Try it first, then reveal one step at a time.

  1. Write the equation: W=FdW = Fd.
Worked exampleA builder lifts a bag of cement of mass 25 kg25\ \text{kg} at a steady speed, from the ground onto a platform 1.6 m1.6\ \text{m} higher. Calculate the work done on the bag. Use g=9.8 N/kgg = 9.8\ \text{N/kg}.

Try it first, then reveal one step at a time.

  1. At a steady speed, the lifting force equals the bag's weight: weight =mg=25×9.8=245 N= mg = 25 \times 9.8 = 245\ \text{N}.
Check yourself
A child pulls a toy wagon with a force of 16 N16\ \text{N}, and it rolls 7.5 m7.5\ \text{m} the same way as the pull. How much work does the pull do, in J?
Check yourself
A girl holds a 40 N40\ \text{N} bag at a steady height and walks 15 m15\ \text{m} along a level corridor at a steady speed. How much work does her upward force do on the bag?

In a practical, you can find the work done pulling a block along a bench. Pull it at a steady speed with a newton meter and read the force. Measure the distance it moves with a metre rule, then multiply.

Using work done to find forces and energy

Because W=ΔEW = \Delta E, you can use an energy change to find a force or a distance. Rearrange W=FdW = Fd first: F=WdF = \frac{W}{d} and d=WFd = \frac{W}{F}.

A braking force is an example. On level ground, when the brakes are the only thing slowing a vehicle, a constant braking force times the braking distance (the distance it travels while braking) equals the energy taken from its kinetic store.

Worked exampleA car on a level road has 240 kJ240\ \text{kJ} in its kinetic store. A constant braking force brings it to rest in 40 m40\ \text{m}. Ignore air resistance. Calculate the braking force.

Try it first, then reveal one step at a time.

  1. The brakes do work equal to the kinetic energy removed: W=ΔE=240 kJ=240 000 JW = \Delta E = 240\ \text{kJ} = 240\,000\ \text{J}.
Worked exampleAn electric winch is supplied with 8.0 kJ8.0\ \text{kJ} by electrical work. It pulls a boat 5.0 m5.0\ \text{m} up a slipway with a force of 1200 N1200\ \text{N} along the slipway. How much of the energy supplied is not transferred to the boat as work?

Try it first, then reveal one step at a time.

  1. The boat moves 5.0 m5.0\ \text{m} in the direction of the pull, so the work done on the boat is W=Fd=1200×5.0=6000 JW = Fd = 1200 \times 5.0 = 6000\ \text{J}.
Check yourself
A skier slides to a stop on level snow. Friction takes 2700 J2700\ \text{J} from her kinetic store while she slides 18 m18\ \text{m}. What is the friction force, in N, if it stays constant?
Check yourself
A trolley is pushed with a force of 25 N25\ \text{N} for 4.0 m4.0\ \text{m} along a level floor at a steady speed. Where do the 100 J100\ \text{J} of work end up?

Common mistakes

  • Dividing force by distance instead of multiplying. Work done is F×dF \times d.
  • Leaving out the unit, or writing N or m. Work done is in joules (J); N m is also accepted.
  • Using a distance that isn't along the force. For a lift, use the height gained, not the distance walked sideways.
  • Saying work "uses up" energy. Work transfers energy to other stores, and the total stays the same.
  • Putting kilojoules into F=WdF = \frac{W}{d}. Change kJ to J first, so the force comes out in N.

Exam tips

  • "Calculate" work done: write W=FdW = Fd, then the equation with your numbers in, then the answer with its unit, J. When a question says "include the unit", the unit earns a mark of its own.
  • "Describe" an energy transfer: name the store the energy leaves, the store it goes to, and how it moves (mechanical work, electrical work, heating or waves).
  • Paper 1/2 multiple choice: energy transferred by a force is FdFd. Fdt\frac{Fd}{t} is energy per second (power), and force × time is not an energy.

Key takeaways

Learn thisW=Fd=ΔEW = Fd = \Delta E
Learn thisWork done = energy transferred. A force that moves an object does mechanical work; an electric current does electrical work.
Learn thisIn W=FdW = Fd, dd is how far the object moves in the direction of the force. A force does no work on an object that doesn't move, or that moves at right angles to the force.
Learn thisWork and energy are both measured in joules: 1 J=1 N m1\ \text{J} = 1\ \text{N m}, the work done when a force of 1 N1\ \text{N} moves an object 1 m1\ \text{m} in the direction of the force.
Learn thisLifting at a steady speed: the lifting force equals the weight, so the work done by the lifting force is weight × height gained.
Learn thisRearranged: F=WdF = \frac{W}{d} and d=WFd = \frac{W}{F}. On level ground, when the braking force is the only force slowing a vehicle, a constant braking force times the braking distance (the distance it travels while braking) equals the energy taken from its kinetic store.

Practise this

6 past-paper questions on Work in the 0625 Extended bank, each with a mark scheme and a worked explanation.

Practise Work →