Energy resources
In a minute
Most power stations heat water into steam, which spins a turbine and a . Wind, water and sunlight can do the job without a boiler. You compare resources by whether they run out, when and where they work, how much they give and what harm they do, and by how much of the input ends up useful.
You'll be able to
- Describe how each energy resource gives useful energy or generates electrical power, naming the boiler, turbine and generator wherever a method uses them.
- Give advantages and disadvantages of each resource: renewability, availability, reliability, scale and environmental impact.
- Explain what it means for an energy transfer to be more or less efficient.
- Say which resources get their energy from the Sun's radiation, and that the Sun releases energy by , which scientists are trying to use for electricity.
- Calculate from energies or powers, as a percentage.
Before you start3 quick questions on what this builds on
Revise first: 1.7.1 Energy
Power stations that make steam
Most power stations heat water in a boiler until it turns to high-pressure steam. The steam spins a turbine, a wheel of angled blades. The turbine turns a generator, which generates electrical power.
Four resources can supply the heat:
1. (coal, oil and natural gas) hold energy in a chemical store. They are burned in a furnace, and the thermal energy released heats the water in the boiler.
2. Biofuels are fuels made from plants or animal waste: wood, ethanol from sugar cane, or biogas from rotting waste. They also hold chemical energy and are burned in the same way.
3. Nuclear fuel, such as uranium, holds energy in a nuclear store. In a reactor, uranium nuclei split (nuclear fission) and release thermal energy, which heats the water. Nothing is burned.
4. Geothermal energy comes from hot rocks deep underground. Water pumped down is heated by the rocks and returns as steam. The heat can also warm buildings directly.
Try it first, then reveal one step at a time.
- Start at the fuel and follow the energy through each part in order, one part per sentence.
- In the reactor, uranium nuclei split by nuclear fission. This releases energy from the nuclear store as thermal energy. The thermal energy heats water in the boiler and turns it into steam. The high-pressure steam makes the turbine spin. The turbine turns the generator, which generates electrical power.
Water, wind and sunlight
These resources need no boiler. Moving water or air turns the turbine directly, or sunlight is used without a turbine at all.
1. Hydroelectric: a dam holds water high up in a reservoir, with gravitational potential energy. Released water flows down pipes and gains kinetic energy. It spins turbines at the bottom, which turn generators.
2. Tides: a barrage (a low dam) is built across a river mouth. Water flows through turbines in the barrage as the tide comes in and as it goes out. The turbines turn generators.
3. Waves: the up-and-down motion of waves moves floats, or pushes air through a turbine. This motion drives a generator.
4. Wind: the Sun heats land, sea and air unevenly. Warm air is less dense, so it rises, and cooler air moves in to replace it: this is wind. The kinetic energy of the wind turns the blades of a wind turbine, which turn a generator.
5. Solar cells: light from the Sun falling on a solar cell generates electrical power directly. There is no turbine and no generator.
6. Solar panels: water flows through pipes in a dark panel on a roof. The panel absorbs the Sun's radiation, mostly infrared and visible light, and the water heats up. A solar panel gives hot water, not electricity.
Try it first, then reveal one step at a time.
- Say where the water is stored, what happens to its energy as it moves, and which parts it turns.
- At high tide, water is held back behind the barrage, higher than the sea outside. As the tide falls, the trapped water flows out through the barrage and gains kinetic energy. The moving water spins turbines in the barrage. The turbines turn generators, which generate electrical power.
Comparing energy resources
A is replaced naturally as fast as we use it, so it will not run out. A is used up much faster than it forms, so it will run out.
Judge each resource on five things. Renewability: will it run out? Availability: can it be used anywhere? Reliability: does it work whenever it is needed? Scale: how much power can one station give? Environmental impact: what harm does it do?
Fossil fuels: non-renewable, reliable and large-scale. Burning them releases carbon dioxide, which adds to global warming. Coal also gives off gases that cause acid rain.
Biofuels: renewable, as the plants regrow, and reliable. Burning releases carbon dioxide, though the growing plants take some in. The crops use land that could grow food.
Nuclear fuel: non-renewable. Reliable and very large-scale, with no carbon dioxide while running. Its radioactive waste stays dangerous for thousands of years, and an accident can release radioactive material.
Geothermal: renewable and reliable, but only possible in a few places, such as volcanic areas. Usually small to medium scale.
Hydroelectric: renewable, reliable and large-scale, and it can start within minutes. It needs a suitable valley and rainfall. The reservoir floods land, destroying habitats and sometimes homes.
Tides: renewable, and the tides come at times you can predict. Few river mouths are suitable, and the barrage changes habitats for birds and fish.
Wind and waves: renewable, with no fuel and no polluting gases. Unreliable, because they depend on the wind. Each machine is small-scale, so many are needed, and wind turbines can be noisy and spoil the view.
Solar cells and solar panels: renewable, with no polluting gases. They work only in daylight and give less on cloudy days. Small-scale: a large power output needs a large area.
Try it first, then reveal one step at a time.
- Pick one point from each side and say why it matters, not just "better for the environment".
- Advantage: a nuclear power station releases no carbon dioxide while it generates electricity, so it does not add to global warming. Disadvantage: it produces radioactive waste, which stays dangerous for thousands of years and must be stored safely.
Try it first, then reveal one step at a time.
- This is about reliability: say when each resource fails, then what the town must do.
- Solar cells generate no electricity at night and less on cloudy days. Wind turbines generate none when the wind does not blow. So at some times the supply is less than the demand. The town needs a reliable resource, such as a gas-fired or hydroelectric power station, that can be switched on at those times.
In the end, nearly every resource gets its energy from the Sun's radiation. Plants grow in sunlight, so fossil fuels and biofuels store the Sun's energy. The Sun drives the wind, and the wind makes waves. The Sun evaporates water, which falls as rain and fills reservoirs.
Three resources are different. Geothermal energy comes from inside the Earth, nuclear fuel formed before the Earth existed, and tides are caused mainly by the Moon's gravitational pull.
The Sun releases its energy by nuclear fusion. In its core, small nuclei such as hydrogen join to form larger nuclei such as helium, and energy is released.
Scientists are researching how to use fusion to generate electrical power on a large scale. It is hard: the fuel must be heated to many millions of degrees, and no fusion power station supplies homes yet.
Efficiency
In any energy transfer, some of the input energy ends up where you want it: the useful output. The rest is wasted, usually as thermal energy that spreads into the surroundings.
tells you what fraction of the input becomes useful. A more efficient device wastes a smaller fraction. Energy is conserved, so the useful output can never be more than the input.
A steam power station wastes much of the fuel's energy as thermal energy in its cooling water and the air. A more efficient station needs less fuel for the same electrical output.
Try it first, then reveal one step at a time.
- Compare the useful output first, then where the rest of the input goes.
- Both lamps give the same useful output, light. The filament lamp also transfers much more energy as thermal energy to its surroundings, which is wasted. So the filament lamp needs a larger total energy input for the same useful output. A smaller fraction of its input is useful, so the LED lamp is more efficient.
To calculate efficiency, use energies or powers. Recall both forms:
Leave out the to get a decimal, such as instead of . Power is energy transferred per second (1.7.4). Input and output must be in the same unit.
Try it first, then reveal one step at a time.
- Write the equation: .
- The light is the useful output: .
- Evaluate: , which is .
Try it first, then reveal one step at a time.
- Write the equation: .
- Rearrange for the input: .
- Substitute: .
- Check: the input is bigger than the output, as it must be.
Don't multiply the output by the efficiency () to find the input. That gives less than the output, which is impossible.
Common mistakes
- Calling nuclear fuel renewable. It gives off no polluting gases while running, but uranium will run out.
- Putting a boiler and steam into hydroelectric, tidal, wave or wind power. Moving water or air turns the turbine directly.
- Mixing up solar cells and solar panels. Solar cells generate electricity from light; solar panels heat water. A question may call a panel of solar cells a "solar panel", so read what it does.
- Writing "energy is lost". Say where it goes: usually the internal (thermal) store of the surroundings.
Exam tips
- "Describe" how a power station works: one stage per sentence, in order. Energy source, then boiler and steam (only where used), turbine, generator. Each stage is usually a mark.
- "State" an advantage or disadvantage precisely: "releases carbon dioxide, which adds to global warming", not "bad for the environment". If cost is ruled out, a cost answer scores nothing.
Key takeaways
Practise this
23 past-paper questions on Energy resources in the 0625 Extended bank, each with a mark scheme and a worked explanation.