Density
In a minute
tells you how much is packed into each unit of volume: . You find it from a mass on a balance and a volume from a measuring cylinder, a ruler or the , and comparing densities tells you whether something floats. Extended adds which of two liquids floats on the other.
You'll be able to
- Define density and use , with units g/cm³ or kg/m³.
- Describe how to measure the density of a liquid, a regular solid and an irregular solid that sinks, and calculate it from the readings.
- Decide from densities whether an object floats or sinks in a liquid.
- Decide from densities which of two liquids that don't mix floats on top of the other.
Before you start2 quick questions on what this builds on
Revise first: 1.1 Physical quantities and measurement techniques and 1.3 Mass and weight
Density: how tightly mass is packed
Fill one shoebox with polystyrene and an identical one with sand. They take up the same volume, but the box of sand has far more mass. Sand packs more mass into each cubic centimetre: it has a higher density.
Here (the Greek letter rho) is density, is mass and is volume. Rearranged, and .
The unit comes from the units you divide. Mass in g and volume in cm³ give g/cm³. Mass in kg and volume in m³ give kg/m³. Water has a density of about , which is .
To change g/cm³ into kg/m³, multiply by 1000. So .
Try it first, then reveal one step at a time.
- Write the equation: .
- Substitute the values: .
- . Mass is in g and volume in cm³, so the unit is g/cm³.
Try it first, then reveal one step at a time.
- Rearrange to make the subject: .
- Substitute: .
- . The density is in kg/m³ and the volume in m³, so the mass is in kg.
- Give 2 significant figures, as the volume has only 2.
Measuring density
Every density experiment has the same plan: measure the mass with a balance, measure the volume, then use . Only the way you find the volume changes.
A liquid. Weigh an empty measuring cylinder on a balance. Pour in some liquid and read its volume at the bottom of the meniscus, with your eye level with it. Weigh the cylinder and liquid together. The mass of the liquid is the second reading minus the first.
A regular solid, such as a cuboid. Measure its length, width and height with a ruler, and work out the volume: . Find its mass on a balance.
An irregular solid that sinks, such as a stone. Use the . Pour enough water into a measuring cylinder to cover the solid, and read the volume. Lower the solid in on a thread until it is completely under water, then read the volume again. The solid's volume is the rise in the reading.
You can also use a displacement can. Fill it with water until water runs out of the spout, and wait until the dripping stops. Put an empty measuring cylinder under the spout, then lower the solid in. Collect all the water that overflows: its volume equals the solid's volume. The solid must sink, so that all of it is under water.
Try it first, then reveal one step at a time.
- Read both volumes at the bottom of the meniscus: before and after.
- Volume of slate = rise in level: .
- Write the equation and substitute: .
- , in g/cm³.
Try it first, then reveal one step at a time.
- Start with the mass of the empty container, so it can be taken away later.
- Then the volume reading, and how to read it.
- Then the second mass reading and the subtraction.
- Finish with the calculation.
- Measure the mass of the empty measuring cylinder on the balance. Pour some oil into the measuring cylinder. Read the volume of oil at the bottom of the meniscus, with your eye level with it. Measure the mass of the measuring cylinder and oil together. Subtract the mass of the empty measuring cylinder to find the mass of the oil. Divide the mass of the oil by its volume: .
Floating and sinking
An object floats in a liquid if its density is less than the density of the liquid. It sinks if its density is greater. If the two densities are equal, it stays wherever you put it in the liquid.
Compare densities, not masses. A huge log floats on a lake, but a small pebble sinks: wood is less dense than water and stone is denser. A steel ship floats because it is hollow: its average density, steel and air together, is below that of the water.
Try it first, then reveal one step at a time.
- Calculate the toy's density: .
- Compare with water: .
- Compare with ethanol: . The densities are close, but the toy's is still greater.
- The density of the toy is . This is less than the density of water, so the toy floats in water. It is greater than the density of ethanol, so the toy sinks in ethanol.
Liquids that do not mix settle into layers. A less dense liquid floats on a denser one, so the least dense liquid ends up on top and the densest at the bottom. The order does not depend on which liquid you pour in first, or on how much of each there is.
Try it first, then reveal one step at a time.
- Oil: .
- Syrup: .
- Put the densities in order: . The least dense liquid floats on top.
- The oil has a density of and the syrup . The oil is the least dense, so it is on top. The water, at , is in the middle. The syrup is the densest, so it is at the bottom.
Common mistakes
- Dividing volume by mass. Density is mass ÷ volume, so the unit has a mass unit on top: g/cm³ or kg/m³.
- Mixing units, such as a mass in kg with a volume in cm³. Convert first so the units match: g with cm³, or kg with m³.
- Taking the reading for container plus liquid as the mass of the liquid. Take away the empty container's mass first.
- Taking only one water reading in the displacement method, or not putting the solid fully under water. Read the level before and after, and subtract.
- Saying an object floats because its density is close to the liquid's, or because it is light. It floats only if its density is less than the liquid's.
Exam tips
- "Define" density in words: mass per unit volume. If you give instead, say what each symbol means.
- "Calculate" a density: write , then the numbers in it, then the answer with a unit that matches the data (g/cm³ or kg/m³).
- "Determine whether it floats": calculate the object's density, compare it with the liquid's using the numbers, and then state floats or sinks.
Key takeaways
Practise this
20 past-paper questions on Density in the 0625 Extended bank, each with a mark scheme and a worked explanation.