IB Maths AI notes › Calculus › Cheat sheet

Calculus cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

Calculus

IB MATHS AI · HL
pastpaperprep.com/revision-notes

5.1Limits and the derivative as a rate of change

lim⁡x→af(x)=L\lim_{x \to a} f(x) = L: f(x)f(x) gets closer and closer to LL as xx gets closer to aa from both sides. The value at aa itself doesn't matter.LEARN
Estimate a limit from values on both sides of aa: a table, a graph or your GDC's table.LEARN
The gradient of a curve at PP is the gradient of the tangent at PP: the limit of the gradients of chords PQPQ as QQ approaches PP.LEARN
dydx=f′(x)when y=f(x)\frac{\mathrm{d}y}{\mathrm{d}x} = f'(x) \quad \text{when } y = f(x)LEARN
The derivative is the gradient function and a rate of change, such as dVdr\frac{\mathrm{d}V}{\mathrm{d}r} or dsdt\frac{\mathrm{d}s}{\mathrm{d}t}. Its units are units of the top variable per unit of the bottom one.LEARN
Where dydx>0\frac{\mathrm{d}y}{\mathrm{d}x} > 0, yy is increasing as xx increases. Where dydx<0\frac{\mathrm{d}y}{\mathrm{d}x} < 0, yy is decreasing.LEARN

5.2Increasing and decreasing functions

If f′(x)>0f'(x) > 0 for every xx in an interval, ff is increasing on that interval: its graph rises from left to right.LEARN
If f′(x)<0f'(x) < 0 for every xx in an interval, ff is decreasing on that interval: its graph falls from left to right.LEARN
f′(x)=0f'(x) = 0 at a stationary point, where the tangent is horizontal. It may be a local maximum, a local minimum or neither.LEARN
On a graph of y=f′(x)y = f'(x), read only the sign: where it is above the horizontal axis ff is increasing, and where it is below, ff is decreasing.LEARN
To find the intervals: find where f′(x)=0f'(x) = 0 or ff or f′f' is undefined, find the sign of f′(x)f'(x) on each piece, then answer with inequalities inside the domain.LEARN

5.3Differentiation of integer-power polynomials

f(x)=xn⇒f′(x)=nxn−1f(x) = x^{n} \Rightarrow f'(x) = nx^{n-1}BOOKLET
For an integer nn, axnax^{n} differentiates to anxn−1anx^{n-1}: multiply by the power, then lower the power by one.LEARN
A constant term differentiates to 00, and axax differentiates to aa.LEARN
Rewrite axn\frac{a}{x^{n}} as ax−nax^{-n} before differentiating. One less than −n-n is −n−1-n - 1.LEARN
ddx(f(x)+g(x))=f′(x)+g′(x)\frac{\mathrm{d}}{\mathrm{d}x}\left(f(x) + g(x)\right) = f'(x) + g'(x)LEARN
Differentiate a sum term by term. Expand brackets and split a fraction with a single-term denominator first; never multiply the derivatives of the factors.LEARN
The gradient of y=f(x)y = f(x) at x=ax = a is f′(a)f'(a). The height of the curve there is f(a)f(a).LEARN

5.4Tangents and normals

Tangent to y=f(x)y = f(x) at x=ax = a: the point is (a,f(a))(a, f(a)) and the gradient is f′(a)f'(a), so y−f(a)=f′(a)(x−a)y - f(a) = f'(a)(x - a).LEARN
mnormal=−1f′(a),f′(a)≠0m_{\text{normal}} = -\frac{1}{f'(a)}, \quad f'(a) \neq 0LEARN
If f′(a)=0f'(a) = 0, the tangent at (a,f(a))(a, f(a)) is y=f(a)y = f(a) and the normal is x=ax = a.LEARN
To find where the tangent to y=f(x)y = f(x) has gradient mm, solve f′(x)=mf'(x) = m for xx, then use ff for yy.LEARN
With a GDC: write down the value it gives for f′(a)f'(a), keep every digit, write the line, and round only the final answer.LEARN

5.5Antidifferentiation, definite integrals and area

∫xn dx=xn+1n+1+C,n≠−1\int x^{n}\,\mathrm{d}x = \frac{x^{n+1}}{n+1} + C,\quad n \neq -1BOOKLET
Integrate a sum one term at a time: axnax^{n} becomes axn+1n+1\frac{ax^{n+1}}{n+1}, for integers n≠−1n \neq -1. Rewrite axn\frac{a}{x^{n}} as ax−nax^{-n} and expand brackets first, and end with one + C+\,C.LEARN
Boundary condition, on a domain with no breaks: integrate with + C+\,C, substitute the known point into the integrated function (not the derivative), solve for CC, then write the full function.LEARN
If F′(x)=f(x)F'(x) = f(x) and ff is continuous for a≤x≤ba \le x \le b, then ∫abf(x) dx=F(b)−F(a)\int_{a}^{b} f(x)\,\mathrm{d}x = F(b) - F(a). Integrating a rate of change gives the total change, in units of the rate times units of xx.LEARN
If f(x)≥0f(x) \ge 0 for a≤x≤ba \le x \le b, the area between y=f(x)y = f(x), the xx-axis and the lines x=ax = a and x=bx = b is A=∫abf(x) dxA = \int_{a}^{b} f(x)\,\mathrm{d}x. Write this integral down before you evaluate it on the GDC.LEARN

5.6Local maximum and minimum points

At a local maximum or local minimum inside the domain of a smooth curve, f′(x)=0f'(x) = 0: the tangent there is horizontal.LEARN
To find local maximum and minimum points, solve f′(x)=0f'(x) = 0 for xx, check whether each is a maximum, a minimum or neither, then find each yy-coordinate from f(x)f(x), not from f′(x)f'(x).LEARN
If f′(a)=0f'(a) = 0 and f′(x)f'(x) changes from ++ to −- as xx increases through aa, there is a local maximum at x=ax = a. From −- to ++ it is a local minimum. With no change of sign it is neither.LEARN
With a GDC, write down f′(x)=0f'(x) = 0, then solve it with the equation solver, or draw y=f′(x)y = f'(x) with the numerical derivative and find its zeros.LEARN
A local maximum or minimum need not be the greatest or least value on the domain. For a graph with no breaks or sharp corners on a≤x≤ba \le x \le b, compare ff at the local maximum and minimum points and at both end points.LEARN

5.7Optimisation problems

To optimise: write the quantity as a function of one variable, solve f′(x)=0f'(x) = 0, justify the maximum or minimum, compare it with the endpoints of the domain, then answer in context with units.LEARN
With two unknowns, use the constraint (a fixed area, volume or amount of material) to write one in terms of the other before you differentiate.LEARN
At a stationary point, f′(x)f'(x) changing from positive to negative means a local maximum; from negative to positive means a local minimum.LEARN
For a function you can differentiate on all of a≤x≤ba \le x \le b, the greatest or least value is at a stationary point inside the domain or at an endpoint, so compare them all.LEARN
If the variable must be a whole number and the optimum is at a stationary point that is not, compare the whole numbers on each side of it.LEARN
With a GDC, write down the function you graph or the equation you solve, keep full values, and round only the final answer.LEARN

5.8Trapezoidal rule

∫aby dx≈12h((y0+yn)+2(y1+y2+⋯+yn−1)),where h=b−an\int_{a}^{b} y\,\mathrm{d}x \approx \frac{1}{2}h\left((y_{0} + y_{n}) + 2(y_{1} + y_{2} + \dots + y_{n-1})\right),\quad \text{where } h = \frac{b - a}{n}BOOKLET
nn intervals of equal width use n+1n + 1 values, and h=b−anh = \frac{b - a}{n}. The end values y0y_{0} and yny_{n} count once; every other value counts twice.LEARN
For y≥0y \ge 0 the rule estimates the area under the curve. For a rate, it estimates the total change, in the rate's units times the xx-units.LEARN
If the curve bends upwards (concave up) across the whole interval, the trapezoidal rule overestimates ∫aby dx\int_{a}^{b} y\,\mathrm{d}x. If it bends downwards (concave down) across the whole interval, it underestimates. If the bending changes, the shape alone can't tell you.LEARN
Percentage error of a trapezoidal estimate: ∣estimate−exactexact∣×100%\left|\frac{\text{estimate} - \text{exact}}{\text{exact}}\right| \times 100\%, where the exact value is the definite integral from your GDC.LEARN
If every height is rounded and the xx-values are exact, using all the upper bounds gives the upper bound of the trapezoidal estimate, and all the lower bounds its lower bound.LEARN

5.9 ◆Differentiation rules and related rates

y=g(u), where u=f(x)⇒dydx=dydu×dudxy = g(u),\ \text{where } u = f(x) \Rightarrow \frac{\mathrm{d}y}{\mathrm{d}x} = \frac{\mathrm{d}y}{\mathrm{d}u} \times \frac{\mathrm{d}u}{\mathrm{d}x}BOOKLET
y=uv⇒dydx=udvdx+vdudxy = uv \Rightarrow \frac{\mathrm{d}y}{\mathrm{d}x} = u\frac{\mathrm{d}v}{\mathrm{d}x} + v\frac{\mathrm{d}u}{\mathrm{d}x}BOOKLET
y=uv⇒dydx=vdudx−udvdxv2y = \frac{u}{v} \Rightarrow \frac{\mathrm{d}y}{\mathrm{d}x} = \frac{v\frac{\mathrm{d}u}{\mathrm{d}x} - u\frac{\mathrm{d}v}{\mathrm{d}x}}{v^{2}}BOOKLET
dAdt=dAdr×drdt\frac{\mathrm{d}A}{\mathrm{d}t} = \frac{\mathrm{d}A}{\mathrm{d}r} \times \frac{\mathrm{d}r}{\mathrm{d}t}LEARN
For xx in radians: xn→nxn−1x^{n} \to nx^{n-1} for any rational nn; sin⁡x→cos⁡x\sin x \to \cos x; cos⁡x→−sin⁡x\cos x \to -\sin x; tan⁡x→1cos⁡2x\tan x \to \frac{1}{\cos^{2} x}; ex→ex\mathrm{e}^{x} \to \mathrm{e}^{x}; ln⁡x→1x\ln x \to \frac{1}{x} for x>0x > 0.BOOKLET
Chain rule in words: differentiate the outside, keep the inside, multiply by the inside's derivative. So, for a constant kk, ekx→kekx\mathrm{e}^{kx} \to k\mathrm{e}^{kx} and sin⁡(kx)→kcos⁡(kx)\sin(kx) \to k\cos(kx) in radians.LEARN
For a product or a quotient, write down uu, vv, dudx\frac{\mathrm{d}u}{\mathrm{d}x} and dvdx\frac{\mathrm{d}v}{\mathrm{d}x} first. The top of the quotient rule starts with vdudxv\frac{\mathrm{d}u}{\mathrm{d}x}.LEARN
Related rates: link the quantities with an equation true at every moment, differentiate, write the chain rule, then substitute the values at the instant.LEARN
A decreasing quantity has a negative rate of change. Give every rate with its units, such as m2 min−1\text{m}^{2}\text{ min}^{-1}.LEARN
To find a maximum or minimum of a model, find f′(x)f'(x) with these rules and solve f′(x)=0f'(x) = 0. Check the sign of f′(x)f'(x) either side, and compare with the values at the end points of the domain.LEARN

5.10 ◆Second derivative and concavity

The second derivative, f′′(x)f''(x) or d2ydx2\dfrac{\mathrm{d}^{2}y}{\mathrm{d}x^{2}}, is the derivative of f′(x)f'(x): differentiate twice. It measures how fast the gradient is changing.LEARN
Second derivative test, at a stationary point x=ax = a (where f′(a)=0f'(a) = 0): f′′(a)>0f''(a) > 0 gives a local minimum and f′′(a)<0f''(a) < 0 a local maximum. If f′′(a)=0f''(a) = 0, use the sign of f′(x)f'(x) on each side instead.LEARN
The graph of ff is concave-up on an interval where f′′(x)>0f''(x) > 0 throughout, and concave-down on an interval where f′′(x)<0f''(x) < 0 throughout.LEARN
A point of inflexion is where the concavity changes. Find it by solving f′′(x)=0f''(x) = 0 (and checking any xx where f′′f'' is undefined but ff exists) and checking that f′′(x)f''(x) changes sign: y=x4y = x^{4} has f′′(0)=0f''(0) = 0 but no point of inflexion. The gradient there need not be 00.LEARN
At a point of inflexion the rate of change f′(x)f'(x) has a local maximum or minimum: in context, the quantity is changing fastest or slowest there compared with nearby values.LEARN
With a GDC, find f′′(x)f''(x) by hand, write down the function you graph, and find where y=f′′(x)y = f''(x) crosses the axis, or where y=f′(x)y = f'(x) has its turning points.LEARN

5.11 ◆Standard integrals and substitution

∫xn dx=xn+1n+1+C,n≠−1\int x^{n}\,\mathrm{d}x = \frac{x^{n+1}}{n+1} + C, \quad n \neq -1BOOKLET
∫1x dx=ln⁡∣x∣+C\int \frac{1}{x}\,\mathrm{d}x = \ln|x| + CBOOKLET
With xx in radians: ∫sin⁡x dx=−cos⁡x+C\int \sin x\,\mathrm{d}x = -\cos x + C, ∫cos⁡x dx=sin⁡x+C\int \cos x\,\mathrm{d}x = \sin x + C and ∫1cos⁡2x dx=tan⁡x+C\int \frac{1}{\cos^{2}x}\,\mathrm{d}x = \tan x + C. Also ∫ex dx=ex+C\int \mathrm{e}^{x}\,\mathrm{d}x = \mathrm{e}^{x} + C.BOOKLET
∫abf(x) dx=F(b)−F(a)\int_{a}^{b} f(x)\,\mathrm{d}x = F(b) - F(a), where FF is any antiderivative of ff and ff is continuous from aa to bb.LEARN
Linear inside: integrate as if ax+bax + b were xx, then divide by aa (for a≠0a \neq 0).LEARN
Inspection: when the integrand is a constant times g′(x) f(g(x))g'(x)\,f(g(x)), integrate the outer function ff with g(x)g(x) kept inside, differentiate your guess, then fix the constant.LEARN
∫g′(x)g(x) dx=ln⁡∣g(x)∣+C\int \frac{g'(x)}{g(x)}\,\mathrm{d}x = \ln|g(x)| + CLEARN
Substitution: let u=g(x)u = g(x) and replace g′(x) dxg'(x)\,\mathrm{d}x by du\mathrm{d}u. For a definite integral, change the limits to uu-values.LEARN

5.12 ◆Areas and volumes of revolution

A=∫ab∣y∣ dxorA=∫ab∣x∣ dyA = \int_{a}^{b} |y|\,\mathrm{d}x \quad \text{or} \quad A = \int_{a}^{b} |x|\,\mathrm{d}yBOOKLET
With the lower limit smaller than the upper, a definite integral counts a region below the xx-axis, or left of the yy-axis, as negative. If the curve crosses the axis inside the interval, split at each crossing and add the sizes.LEARN
For an area against the yy-axis, or a volume about the yy-axis, write xx (or x2x^{2}) in terms of yy, and use yy-values as the limits.LEARN
V=∫abπy2 dxorV=∫abπx2 dyV = \int_{a}^{b} \pi y^{2}\,\mathrm{d}x \quad \text{or} \quad V = \int_{a}^{b} \pi x^{2}\,\mathrm{d}yBOOKLET
In a volume of revolution, π\pi comes from each disc's area, πr2\pi r^{2}. Square the radius, and never put 2π2\pi in front: 2π2\pi or 360∘360^{\circ} is one full turn.LEARN
∫abπy2 dx\int_{a}^{b} \pi y^{2}\,\mathrm{d}x is the volume when the region between the curve and the xx-axis turns once about the xx-axis. If a region doesn't reach the axis of rotation, the solid has a hole: subtract the volume of the hole.LEARN

5.13 ◆Kinematics

v=dsdtv = \frac{\mathrm{d}s}{\mathrm{d}t}LEARN
a=dvdt=d2sdt2=vdvdsa = \frac{\mathrm{d}v}{\mathrm{d}t} = \frac{\mathrm{d}^{2}s}{\mathrm{d}t^{2}} = v\frac{\mathrm{d}v}{\mathrm{d}s}BOOKLET
Dot notation means derivatives with respect to time: x˙=dxdt\dot{x} = \frac{\mathrm{d}x}{\mathrm{d}t} and x¨=d2xdt2\ddot{x} = \frac{\mathrm{d}^{2}x}{\mathrm{d}t^{2}}.LEARN
In straight-line motion: at rest when v=0v = 0; changes direction when vv changes sign; speed =∣v∣= \lvert v\rvert, the magnitude of the velocity.LEARN
In straight-line motion, an object speeds up when vv and aa have the same sign and slows down when their signs differ.LEARN
displacement=∫t1t2v(t) dt\text{displacement} = \int_{t_{1}}^{t_{2}} v(t)\,\mathrm{d}tBOOKLET
distance=∫t1t2∣v(t)∣ dt\text{distance} = \int_{t_{1}}^{t_{2}} \lvert v(t)\rvert\,\mathrm{d}tBOOKLET
Distance by hand: split the interval at each time vv changes sign, integrate vv over each piece, and add the sizes.LEARN

5.14 ◆Setting up and separating differential equations

"Proportional to" means "equals a constant kk times". For a quantity that decreases, write −k-k with k>0k > 0.LEARN
Separating: dydx=f(x) g(y)\frac{\mathrm{d}y}{\mathrm{d}x} = f(x)\,g(y), with g(y)≠0g(y) \neq 0, gives ∫1g(y) dy=∫f(x) dx\int \frac{1}{g(y)}\,\mathrm{d}y = \int f(x)\,\mathrm{d}x. Add one + C+\,C as soon as you integrate.LEARN
The general solution of a first-order differential equation has one arbitrary constant. A known value, such as the value at t=0t = 0, fixes it and gives the particular solution.LEARN
dydx=ky\frac{\mathrm{d}y}{\mathrm{d}x} = ky has general solution y=Aekxy = A\mathrm{e}^{kx}, where AA is the value of yy at x=0x = 0.LEARN
ef(x)+c=Aef(x)\mathrm{e}^{f(x) + c} = A\mathrm{e}^{f(x)}: the constant multiplies. Drop the modulus in ln⁡∣y∣\ln|y| only when the context fixes the sign of yy.LEARN

5.15 ◆Slope fields

The slope field of dydx=f(x,y)\frac{\mathrm{d}y}{\mathrm{d}x} = f(x, y) has a short segment at each grid point (a,b)(a, b) with gradient f(a,b)f(a, b). A solution curve is tangent to every segment it passes through.LEARN
In the slope field of dydx=f(x,y)\frac{\mathrm{d}y}{\mathrm{d}x} = f(x, y): if ff contains xx only, the segments in each vertical column are parallel. If ff contains yy only, the segments along each horizontal row are parallel.LEARN
The segments of dydx=f(x,y)\frac{\mathrm{d}y}{\mathrm{d}x} = f(x, y) are horizontal where f(x,y)=0f(x, y) = 0. A solution curve has a stationary point exactly where it meets this curve.LEARN
To sketch a solution on a slope field: go through the given point, follow the segments in both directions across the diagram, and put the turning points where the segments are flat.LEARN
For dydt=f(y)\frac{\mathrm{d}y}{\mathrm{d}t} = f(y) with f(c)=0f(c) = 0, the line y=cy = c is a solution. If the segments just below it rise and those just above it fall, solutions that start close to cc move towards cc as tt increases.LEARN

5.16 ◆Euler's method

yn+1=yn+h×f(xn,yn),xn+1=xn+hy_{n+1} = y_{n} + h \times f(x_{n}, y_{n}), \quad x_{n+1} = x_{n} + hBOOKLET
xn+1=xn+hf1(xn,yn,tn),yn+1=yn+hf2(xn,yn,tn),tn+1=tn+hx_{n+1} = x_{n} + h f_1(x_{n}, y_{n}, t_{n}), \quad y_{n+1} = y_{n} + h f_2(x_{n}, y_{n}, t_{n}), \quad t_{n+1} = t_{n} + hBOOKLET
Euler's method gives an estimate, not the exact solution. A smaller step length means more steps and usually a closer estimate.LEARN
Number of steps =end value−start valueh= \frac{\text{end value} - \text{start value}}{h}. Each row uses only the row above, and in a coupled system both new values come from the old row.LEARN
Spreadsheet: put x0x_{0} and y0y_{0} in row 2, write row 3 as x+hx + h and y+h×f(x,y)y + h \times f(x, y) using row 2's cells, then fill down.LEARN

5.17 ◆Phase portraits for coupled equations

For dxdt=ax+by\frac{\mathrm{d}x}{\mathrm{d}t} = ax + by, dydt=cx+dy\frac{\mathrm{d}y}{\mathrm{d}t} = cx + dy with non-zero eigenvalues, the only equilibrium point is the origin. A trajectory's gradient is dydx=dy/dtdx/dt\frac{\mathrm{d}y}{\mathrm{d}x} = \frac{\mathrm{d}y/\mathrm{d}t}{\mathrm{d}x/\mathrm{d}t}.LEARN
x=Aeλ1tp1+Beλ2tp2(real distinct eigenvalues)\boldsymbol{x} = A\mathrm{e}^{\lambda_{1}t}\boldsymbol{p}_{1} + B\mathrm{e}^{\lambda_{2}t}\boldsymbol{p}_{2}\quad\text{(real distinct eigenvalues)}BOOKLET
Real eigenvalues: each eigenvector line through the origin holds straight-line trajectories, moving in for a negative eigenvalue and out for a positive one.LEARN
For dxdt=ax+by\frac{\mathrm{d}x}{\mathrm{d}t} = ax + by, dydt=cx+dy\frac{\mathrm{d}y}{\mathrm{d}t} = cx + dy, the origin is a stable equilibrium, with every solution heading into it, when both eigenvalues are negative or have a negative real part. When both are positive or have a positive real part, every solution except the origin itself heads away.LEARN
Real eigenvalues of opposite signs: the origin is a saddle point. Trajectories come in alongside the negative eigenvalue's line and leave alongside the positive one's.LEARN
Complex eigenvalues α±βi\alpha \pm \beta\mathrm{i} (α,β≠0\alpha, \beta \neq 0) give spirals. Imaginary eigenvalues ±βi\pm\beta\mathrm{i} (β≠0\beta \neq 0) give closed circles or ellipses. In both cases the motion is anticlockwise if dydt>0\frac{\mathrm{d}y}{\mathrm{d}t} > 0 at (1,0)(1, 0), clockwise if dydt<0\frac{\mathrm{d}y}{\mathrm{d}t} < 0.LEARN

5.18 ◆Second-order differential equations

To solve d2xdt2=f(x,dxdt,t)\frac{\mathrm{d}^{2}x}{\mathrm{d}t^{2}} = f\left(x, \frac{\mathrm{d}x}{\mathrm{d}t}, t\right), let y=dxdty = \frac{\mathrm{d}x}{\mathrm{d}t}: then dxdt=y\frac{\mathrm{d}x}{\mathrm{d}t} = y and dydt=f(x,y,t)\frac{\mathrm{d}y}{\mathrm{d}t} = f(x, y, t). You need two initial conditions, xx and dxdt\frac{\mathrm{d}x}{\mathrm{d}t} at the start.LEARN
Euler's method for a second-order equation, with y=dxdty = \frac{\mathrm{d}x}{\mathrm{d}t}: xn+1=xn+hynx_{n+1} = x_{n} + hy_{n} and yn+1=yn+h×f(xn,yn,tn)y_{n+1} = y_{n} + h \times f(x_{n}, y_{n}, t_{n}), both from the old row. Keep full values until the end.LEARN
For d2xdt2+adxdt+bx=0\frac{\mathrm{d}^{2}x}{\mathrm{d}t^{2}} + a\frac{\mathrm{d}x}{\mathrm{d}t} + bx = 0: the matrix is (01−b−a)\begin{pmatrix}0 & 1\\ -b & -a\end{pmatrix}, the eigenvalues solve λ2+aλ+b=0\lambda^{2} + a\lambda + b = 0, and (1λ)\begin{pmatrix}1\\ \lambda\end{pmatrix} is an eigenvector for each eigenvalue λ\lambda.LEARN
x=Aeλ1tp1+Beλ2tp2(real distinct eigenvalues)\boldsymbol{x} = A\mathrm{e}^{\lambda_{1}t}\boldsymbol{p}_{1} + B\mathrm{e}^{\lambda_{2}t}\boldsymbol{p}_{2}\quad\text{(real distinct eigenvalues)}BOOKLET
For d2xdt2+adxdt+bx=0\frac{\mathrm{d}^{2}x}{\mathrm{d}t^{2}} + a\frac{\mathrm{d}x}{\mathrm{d}t} + bx = 0 with real distinct eigenvalues: x=Aeλ1t+Beλ2tx = A\mathrm{e}^{\lambda_{1}t} + B\mathrm{e}^{\lambda_{2}t}. Find AA and BB from xx and dxdt\frac{\mathrm{d}x}{\mathrm{d}t} at t=0t = 0.LEARN
Phase portrait of xx against y=dxdty = \frac{\mathrm{d}x}{\mathrm{d}t} for d2xdt2+adxdt+bx=0\frac{\mathrm{d}^{2}x}{\mathrm{d}t^{2}} + a\frac{\mathrm{d}x}{\mathrm{d}t} + bx = 0: real, distinct, negative eigenvalues mean a return to rest without oscillating; complex with negative real part, oscillations that die away (a clockwise spiral in); imaginary, oscillations for ever (a clockwise ellipse).LEARN

Which method when

'Find f′(x)f'(x)' for a sum of terms axnax^{n}, nn an integer → power rule term by term, after rewriting axn\frac{a}{x^{n}} as ax−nax^{-n} and expanding brackets; a model with ex\mathrm{e}^{x} → GDC numerical derivative, which gives only the value at one point (5.3, 5.1)LEARN
'Find the values of xx for which ff is increasing (decreasing)' → solve f′(x)=0f'(x) = 0, note any xx where ff or f′f' is undefined, find the sign of f′(x)f'(x) on each piece; answer with inequalities inside the domain, not end points alone (5.2)LEARN
'Equation of the tangent (normal) at x=ax = a' → point (a,f(a))(a, f(a)), gradient f′(a)f'(a), then y−y1=m(x−x1)y - y_{1} = m(x - x_{1}); the normal's gradient is −1f′(a)-\frac{1}{f'(a)} when f′(a)≠0f'(a) \neq 0, and the normal is x=ax = a when f′(a)=0f'(a) = 0 (5.4)LEARN
'Coordinates of the local maximum (minimum)' → solve f′(x)=0f'(x) = 0 (GDC: the zeros of y=f′(x)y = f'(x), or the polynomial solver when f′(x)f'(x) is a polynomial), yy from f(x)f(x); classify by the sign change of f′(x)f'(x); for the greatest value on a≤x≤ba \le x \le b of a graph with no breaks, also compare f(a)f(a) and f(b)f(b) (5.6)LEARN
'Maximise the volume', 'least cost', a fixed area or amount of material → use the constraint to get one variable, solve f′(x)=0f'(x) = 0, justify with the sign change of f′(x)f'(x), compare with the end points of the domain; a whole-number variable: compare the whole numbers either side (5.7)LEARN
Given dydx\frac{\mathrm{d}y}{\mathrm{d}x} and a point, 'find yy in terms of xx' → integrate term by term with + C+\,C (n≠−1n \neq -1), substitute the point into the integrated function (not the derivative), write the full function; one point fixes CC only on a domain with no breaks (5.5)LEARN
'Total change' from a rate, or 'area under the curve' where f(x)≥0f(x) \ge 0 for a≤x≤ba \le x \le b → write ∫abf(x) dx\int_{a}^{b} f(x)\,\mathrm{d}x, then evaluate it on the GDC; for a region enclosed with the xx-axis, the limits are the curve's zeros, kept in full (5.5)LEARN
A table at equal intervals, or 'use the trapezoidal rule' → 12h((y0+yn)+2(y1+⋯+yn−1))\frac{1}{2}h\left((y_{0} + y_{n}) + 2(y_{1} + \dots + y_{n-1})\right) with nn intervals, n+1n + 1 values and h=b−anh = \frac{b - a}{n}; concave up across the whole interval overestimates, concave down across the whole interval underestimates (5.8)LEARN

◆Which method when

A rate linked to another quantity's rate, 'how fast is the area increasing when r=3r = 3?' → related rates: an equation true at every moment, differentiate, write the chain rule such as dAdt=dAdr×drdt\frac{\mathrm{d}A}{\mathrm{d}t} = \frac{\mathrm{d}A}{\mathrm{d}r} \times \frac{\mathrm{d}r}{\mathrm{d}t}, then substitute the values at the instant; a decreasing quantity has a negative rate (5.9)LEARN
'Justify that it is a maximum' → second derivative test at a stationary point: f′′(a)<0f''(a) < 0 maximum, f′′(a)>0f''(a) > 0 minimum, and if f′′(a)=0f''(a) = 0 use the sign of f′f' either side; 'when is it increasing fastest?' → the maximum of f′f': a point of inflexion where f′′f'' changes from positive to negative, or the maximum of y=f′(x)y = f'(x) on the GDC; on a closed domain also compare the end points (5.10)LEARN
'Find the exact value' of an integral → antiderivative by hand: a linear inside ax+bax + b → integrate as if it were xx and divide by aa; a constant times g′(x) f(g(x))g'(x)\,f(g(x)), including g′(x)g(x)→ln⁡∣g(x)∣\frac{g'(x)}{g(x)} \to \ln|g(x)| → inspection or substitution u=g(x)u = g(x), changing the limits to uu-values; the GDC value is only a check (5.11)LEARN
Area with part of the curve below the xx-axis → split at the crossings and add the sizes, or ∫ab∣y∣ dx\int_{a}^{b} |y|\,\mathrm{d}x on the GDC; region against the yy-axis → ∫∣x∣ dy\int |x|\,\mathrm{d}y with yy-limits; a full turn about the xx-axis → ∫πy2 dx\int \pi y^{2}\,\mathrm{d}x, about the yy-axis → ∫πx2 dy\int \pi x^{2}\,\mathrm{d}y with yy-limits (5.12)LEARN
Straight-line motion → differentiate ss for vv and aa; vv given in terms of ss → a=vdvdsa = v\frac{\mathrm{d}v}{\mathrm{d}s}; 'displacement' from t1t_{1} to t2t_{2} → ∫t1t2v dt\int_{t_{1}}^{t_{2}} v\,\mathrm{d}t; 'distance travelled' → ∫t1t2∣v∣ dt\int_{t_{1}}^{t_{2}} |v|\,\mathrm{d}t on the GDC; speeding up when vv and aa have the same sign (5.13)LEARN
'The rate is proportional to…' → dydt=k×(…)\frac{\mathrm{d}y}{\mathrm{d}t} = k \times (\ldots), with −k-k and k>0k > 0 for a decrease; right side of the form f(x) g(y)f(x)\,g(y) → separate the variables (dividing by g(y)≠0g(y) \neq 0), add one + C+\,C as you integrate, then use the known value; dydx=ky\frac{\mathrm{d}y}{\mathrm{d}x} = ky → y=Aekxy = A\mathrm{e}^{kx} (5.14)LEARN
A differential equation you can't separate → 'sketch the solution through a point' or 'describe the long-term behaviour': slope field, follow the segments both ways, turning points where f(x,y)=0f(x, y) = 0; 'use Euler's method to estimate': yn+1=yn+hf(xn,yn)y_{n+1} = y_{n} + h f(x_{n}, y_{n}) on the GDC or a spreadsheet, end−starth\frac{\text{end} - \text{start}}{h} steps, and for a coupled pair both new values from the old row (5.15, 5.16)LEARN
Linear coupled pair dxdt=ax+by\frac{\mathrm{d}x}{\mathrm{d}t} = ax + by, dydt=cx+dy\frac{\mathrm{d}y}{\mathrm{d}t} = cx + dy, 'phase portrait' or 'long-term behaviour' → eigenvalues of the matrix: real distinct → x=Aeλ1tp1+Beλ2tp2\boldsymbol{x} = A\mathrm{e}^{\lambda_{1}t}\boldsymbol{p}_{1} + B\mathrm{e}^{\lambda_{2}t}\boldsymbol{p}_{2}, both negative → stable, opposite signs → saddle point; complex with real part ≠0\neq 0 → spiral, inwards if the real part is negative; purely imaginary → closed ellipses; turning direction from the sign of dydt\frac{\mathrm{d}y}{\mathrm{d}t} at (1,0)(1, 0) (5.17)LEARN
Second-order d2xdt2+adxdt+bx=0\frac{\mathrm{d}^{2}x}{\mathrm{d}t^{2}} + a\frac{\mathrm{d}x}{\mathrm{d}t} + bx = 0 → let y=dxdty = \frac{\mathrm{d}x}{\mathrm{d}t}, matrix (01−b−a)\begin{pmatrix}0 & 1\\ -b & -a\end{pmatrix}, eigenvalues from λ2+aλ+b=0\lambda^{2} + a\lambda + b = 0; real distinct → x=Aeλ1t+Beλ2tx = A\mathrm{e}^{\lambda_{1}t} + B\mathrm{e}^{\lambda_{2}t} with AA and BB from both xx and dxdt\frac{\mathrm{d}x}{\mathrm{d}t} at t=0t = 0; any other second-order equation → Euler's method on the coupled form (5.18)LEARN
Follows the IB Maths AI guide (first assessment 2021). Not affiliated with the IB.