Slope fields
In a minute
A draws a short line at each grid point with the gradient that a gives there. Solution curves run along these lines, so you can sketch a solution and see its long-term behaviour without solving the equation. In a model, the field shows where a quantity rises, falls, peaks or levels off.
You'll be able to
- Work out the segments of a slope field, and match a differential equation to its field.
- Sketch the solution curve through a given point, with its turning points where the segments are flat.
- Find the curve where the segments are horizontal, and any horizontal line that is itself a solution.
- Interpret a slope field in context: where a quantity rises or falls, where it peaks, and the value it levels off towards.
Before you start3 quick questions on what this builds on
Revise first: 5.14 Setting up and separating differential equations
What a slope field shows
In 5.14 you solved differential equations by separating the variables. Many can't be solved that way. But an equation still tells you the gradient of a solution at every point .
So pick a grid of points. At each one, draw a short line with that gradient. Together the lines show which way a solution heads as it passes through each point.
A solution curve is tangent to every segment it passes through. You don't need its equation: you follow the segments.
To draw a segment, substitute the point into . Then draw a short line with that gradient, centred on the point. A positive gradient rises to the right, a negative one falls, and gives a horizontal segment.
Try it first, then reveal one step at a time.
- At : . The segment rises steeply to the right.
- At : . The segment is horizontal.
- At : . The segment falls steeply.
- Check against the figure. Every point on gives , so the segments on that line are flat. Above the line , so the segments fall. Below it they rise.
Three features help you match an equation to its field.
1. If contains only, the gradient is the same all the way up each vertical column. The segments in a column are parallel.
2. If contains only, the segments along each horizontal row are parallel.
3. The segments are horizontal wherever . Solve this to find where: it may be a horizontal line, a vertical line or a curve.
Try it first, then reveal one step at a time.
- contains only, so each row of segments should be parallel. In the segments change along a row but not up a column, so belongs to an equation in . Rule it out.
- when . Both and have horizontal segments along .
- Test a point below that line. At , , so the segment there rises.
- In the segments below rise. In they fall. So the field is .
- , because its segments are horizontal along and rise below it: at the gradient is .
Sketching solution curves
A solution through a given point is a . Its graph is called a solution curve. To sketch it on a slope field:
1. Mark the given point.
2. Move right from the point a little at a time, always in the direction of the nearby segments. Never cut across them.
3. Go back to the point and do the same to the left, unless the question asks for only part of the curve.
4. Check the turning points: the curve is flat exactly where the segments are flat.
To tell a maximum from a minimum, check the gradient just before and just after. Rising then falling is a maximum. Falling then rising is a minimum.
Try it first, then reveal one step at a time.
- Mark . There , so the curve starts by falling.
- Moving right, the curve falls towards the dashed line . The segments get flatter as it gets close.
- It crosses where the segments are horizontal. It falls before and rises after, so this is a minimum, at about .
- After the minimum the curve lies below , where the segments rise. It gets closer and closer to the line . On that line every segment has gradient , the line's own gradient, so the line is itself a solution.
- Moving left from , becomes more negative, so the segments get steeper. Going left, the curve climbs steeply.
- The curve falls from to a minimum on , at about . It then rises, getting closer and closer to the line . To the left of it climbs steeply.
Try it first, then reveal one step at a time.
- At a stationary point , so and . The point lies on this curve, dashed in the figure.
- Substitute :
- Just before, at : , so is rising.
- Just after, at : , so is falling.
- Rising then falling: a maximum. The concentration peaks at about mg per litre, hour after the tablet is taken.
Interpreting slope fields in context
In a model the horizontal axis is usually time . The slope field then shows how the quantity changes from any starting value: where it rises or falls, how fast, and where it levels off.
Look for rows of flat segments. If and , then is a solution: a quantity that starts at stays at .
If instead the segments point away from on both sides, solutions that start near move away from it.
Try it first, then reveal one step at a time.
- The right-hand side contains only, so each row of segments is parallel.
- The segments are flat where : at and .
- For both factors are positive, so the segments rise. For , , so they fall.
- From the curve rises, steepest in the middle, then flattens towards . From it falls and flattens towards .
- In context: whatever the starting population (above ), the number of fish settles towards , the most the lake supports in the long run.
- From fish the population increases towards . From fish it decreases towards . In the long term the lake holds about fish.
Try it first, then reveal one step at a time.
- Enter the equation with as and as , and the starting point . The steps for each GDC are below.
- The gradient contains only, so each row of segments is parallel. At the gradient is : the parcel speeds up quickly at first.
- The segments are flat where , so .
- Below the gradient is positive but shrinks as grows. So the curve rises more and more slowly, levelling off towards .
- In context: the speed increases towards but never quite reaches it. The model only applies while the parcel is still falling.
On the TI-Nspire, is and is y1. The TI-84 Plus CE and the fx-CG50 can't draw a slope field, so on those you work out a few gradients and sketch.
Common mistakes
- Sketching the solution only to the right of the given point. Unless the question gives a domain, draw it across the whole diagram, left and right.
- Drawing a curve that cuts across the segments, or misses the given point. Keep it tangent to the segments it passes, and start it exactly on the point.
- Putting a turning point in the wrong place. A solution curve is flat exactly where it meets the curve , so its maxima and minima lie on that curve.
- Mixing up and . For the flat segments lie on the vertical line , not on the horizontal line .
- Answering an interpretation question with a number only. Say what happens to the quantity, with its units, such as ‘the population decreases towards fish’.
Exam tips
- Sketch: the curve must pass through the given point, follow the segments, run across the diagram in both directions, and have its turning points where the segments are flat. Each of these features can earn a mark.
- Identify the slope field and give a reason: state one feature, checked at a point, that the other diagrams don't share. For example, ‘at the gradient is , so the segments there rise’.
- Find the curve where : write first, then rearrange it. Show that line before your answer, so a slip later still leaves your method visible.
- Describe or interpret long-term behaviour: give the value the quantity approaches, say whether it rises or falls towards it, and include units.
Key takeaways
Practise this
32 past-paper questions on Differential equations in the AI HL bank, each with a mark scheme and a worked explanation.