5.3 · SLPaper 1Paper 2

Differentiation of integer-power polynomials

In a minute

The turns axnax^{n} into anxn−1anx^{n-1}: multiply by the power, then lower the power by one. It works for every integer power, including negative ones such as 5x2=5x−2\frac{5}{x^{2}} = 5x^{-2}. Differentiate a sum one term at a time, and you can find the rate of change of any model, such as a cost or a temperature, in a few lines.

You'll be able to

  • Differentiate axnax^{n} with the , including constant terms and terms like 3x3x.
  • Rewrite terms such as 4x3\frac{4}{x^{3}} as 4x−34x^{-3}, then differentiate them.
  • Differentiate a sum of power terms one term at a time, expanding brackets or splitting a fraction first.
  • Find and interpret a rate of change at a point, and use your GDC to check it or to solve an equation involving f′(x)f'(x).
Before you start2 quick questions on what this builds on
Check yourself
A curve y=f(x)y = f(x) has f(x)=2x2−7x+1f(x) = 2x^{2} - 7x + 1 and f′(x)=4x−7f'(x) = 4x - 7. Find the gradient of the curve at x=3x = 3.
Check yourself
Write 2x5\frac{2}{x^{5}} as a number times a power of xx.

Revise first: 1.5 Exponents and introductory logarithms, 1.8 Solving equations with technology and 5.1 Limits and the derivative as a rate of change

The power rule

In 5.1 you estimated gradients from chords, one point at a time. That is slow. Look at the gradient functions it produces and a pattern appears.

y=x2y = x^{2} has gradient function 2x2x. y=x3y = x^{3} has 3x23x^{2}, and y=x4y = x^{4} has 4x34x^{3}. Each time, the power comes down in front and the new power is one less.

In the formula booklet
f(x)=xn⇒f′(x)=nxn−1f(x) = x^{n} \Rightarrow f'(x) = nx^{n-1}

This is in the formula booklet, so you don't need to memorise it. You do need to use it quickly and without slips. A number in front, the coefficient aa, just comes along: multiply it by the power.

Learn this
f(x)=axn⇒f′(x)=anxn−1f(x) = ax^{n} \Rightarrow f'(x) = anx^{n-1}

In this lesson nn is an integer: positive, zero or negative. The rule needs the variable in the base. It does not apply to an exponential such as 2x2^{x}, where the variable is in the power.

Two special cases appear in almost every polynomial. A term axax is ax1ax^{1}, so it gives a×1×x0=aa \times 1 \times x^{0} = a. A straight line y=axy = ax has the same gradient aa everywhere, so this fits.

A constant aa differentiates to 00. Its graph y=ay = a is a horizontal line, and a horizontal line has gradient 00.

Worked exampleDifferentiate f(x)=0.4x5f(x) = 0.4x^{5}.

Try it first, then reveal one step at a time.

  1. Read off the coefficient and the power: a=0.4a = 0.4 and n=5n = 5.
Worked exampleA car's braking distance on a dry road is modelled by D=0.0075v2D = 0.0075v^{2} metres, where vv is its speed in km/h. (a) Find dDdv\dfrac{\mathrm{d}D}{\mathrm{d}v}. (b) Find its value when v=80v = 80 and interpret it.

Try it first, then reveal one step at a time.

  1. (a) The variable is vv, not xx, but the rule is the same. Multiply 0.00750.0075 by the power 22, and lower the power to 11: dDdv=0.015v\dfrac{\mathrm{d}D}{\mathrm{d}v} = 0.015v.
Check yourself
Differentiate g(x)=2.5x4g(x) = 2.5x^{4}.
Check yourself
A circular oil slick has area A=πr2A = \pi r^{2} square metres when its radius is rr metres. Find dAdr\dfrac{\mathrm{d}A}{\mathrm{d}r} when r=15r = 15, to 3 s.f.

Negative powers

The works for negative integer powers too. First write each term as a power of xx, using 1xn=x−n\frac{1}{x^{n}} = x^{-n} from 1.5.

Take y=1x=x−1y = \frac{1}{x} = x^{-1}. Bring down the −1-1, then lower the power to −2-2. That gives dydx=−x−2=−1x2\dfrac{\mathrm{d}y}{\mathrm{d}x} = -x^{-2} = -\frac{1}{x^{2}}.

The minus sign matches the graph. For x>0x > 0, the curve y=1xy = \frac{1}{x} falls as xx grows, so its gradient is negative.

Lowering a negative power by one makes it more negative. So −1-1 becomes −2-2, and −3-3 becomes −4-4, not −2-2.

1. Rewrite each term as axnax^{n}. Only the power of xx moves: 7x3=7x−3\frac{7}{x^{3}} = 7x^{-3}.

2. Apply the power rule: multiply by the power, then lower the power by one.

3. If you like, write the answer back as a fraction: −21x−4=−21x4-21x^{-4} = -\frac{21}{x^{4}}. Both forms earn the marks.

Worked exampleDifferentiate f(x)=4x3f(x) = \frac{4}{x^{3}}, for x≠0x \ne 0.

Try it first, then reveal one step at a time.

  1. Rewrite as a power of xx: f(x)=4x−3f(x) = 4x^{-3}.
Worked exampleThe illuminance from a small lamp is modelled by E=720x2E = \frac{720}{x^{2}} lux, where xx is the distance from the lamp in metres. (a) Find dEdx\dfrac{\mathrm{d}E}{\mathrm{d}x}. (b) Find its value when x=4x = 4 and interpret it.

Try it first, then reveal one step at a time.

  1. (a) Rewrite as a power: E=720x−2E = 720x^{-2}.
Check yourself
Differentiate y=9xy = \frac{9}{x}.
Check yourself
For f(x)=32x2f(x) = \frac{3}{2x^{2}}, find the gradient of the graph of ff at x=−1x = -1.

Sums of terms

Most models are sums of power terms, such as a . To differentiate a sum, differentiate each term and add the results.

Learn this
ddx(f(x)+g(x))=f′(x)+g′(x)\frac{\mathrm{d}}{\mathrm{d}x}\left(f(x) + g(x)\right) = f'(x) + g'(x)

A constant term only moves the graph up or down. That doesn't change how steep it is, so the constant differentiates to 00. In a cost model, a higher fixed cost raises every total cost but doesn't change the rate at which cost grows.

Two cost curves, C equals 0.5 x squared plus 20 and C equals 0.5 x squared plus 50, one 30 units above the other. At x equals 6 each has a dashed tangent, and the two tangents are parallel, each with gradient 6. 0 2 4 6 8 10 20 40 60 80 100 x C C = 0.5x² + 20 C = 0.5x² + 50 gradient 6 gradient 6
Raising the fixed cost from 2020 to 5050 lifts the curve but leaves the gradient at every xx the same.
Worked exampleDifferentiate f(x)=0.2x3−1.5x2+4x−9f(x) = 0.2x^{3} - 1.5x^{2} + 4x - 9.

Try it first, then reveal one step at a time.

  1. Take one term at a time. 0.2x30.2x^{3} gives 0.6x20.6x^{2}.
Check yourself
Differentiate g(x)=3x4−x2+7x−2g(x) = 3x^{4} - x^{2} + 7x - 2.

Term by term works on sums only. A product or a fraction must be rewritten as a sum of powers first.

Why not differentiate each factor of a product? Take y=x2×xy = x^{2} \times x. Multiplying the derivatives gives 2x×1=2x2x \times 1 = 2x. But y=x3y = x^{3}, whose derivative is 3x23x^{2}. So expand the brackets first.

A fraction with a single term underneath splits into separate terms: divide every term on top by it. For example, x2+6x=x+6x−1\frac{x^{2} + 6}{x} = x + 6x^{-1}. A denominator such as x+1x + 1 can't be split like this, so these rules don't reach it; your GDC can still find its gradient at a point.

Check yourself
Differentiate y=(2x+1)(x−3)y = (2x + 1)(x - 3).
Worked exampleA workshop's weekly cost of making xx chairs is 0.5x2+30x+8000.5x^{2} + 30x + 800 dollars. So the average cost per chair is C(x)=0.5x2+30x+800xC(x) = \dfrac{0.5x^{2} + 30x + 800}{x} dollars, for x>0x > 0. (a) Find C′(x)C'(x). (b) Find C′(20)C'(20) and interpret it.

Try it first, then reveal one step at a time.

  1. (a) Split the fraction: divide each term on top by xx. C(x)=0.5x+30+800x−1C(x) = 0.5x + 30 + 800x^{-1}.
Check yourself
The curve y=kx3−5xy = kx^{3} - 5x has gradient 1919 at x=2x = 2. Find the value of kk.

On Paper 2 you often differentiate by hand, then use the GDC to solve the equation that follows. Write down the equation before you solve it: that line earns the method mark.

Worked exampleThe temperature of a compost heap tt days after it is built is modelled by T=0.02t3−0.9t2+12t+15T = 0.02t^{3} - 0.9t^{2} + 12t + 15 °C, for 0≤t≤200 \le t \le 20. Use your GDC to find when the temperature is rising at 33 °C per day. Give your answer to 3 s.f.

Try it first, then reveal one step at a time.

  1. "Rising at 3 °C per day" is a rate, so it is about dTdt\dfrac{\mathrm{d}T}{\mathrm{d}t}, not TT.

Common mistakes

  • Keeping the constant. In x3+8x^{3} + 8 the 88 differentiates to 00, so the answer is 3x23x^{2}. An extra term in f′(x)f'(x) loses a mark even when the other terms are right.
  • Losing a linear term. The derivative of −4x-4x is −4-4, not 00. Only the constant term differentiates to 00.
  • Lowering a negative power the wrong way. x−2x^{-2} gives −2x−3-2x^{-3}, because one less than −2-2 is −3-3, not −1-1.
  • Moving the number along with the xx. 34x2=34x−2\frac{3}{4x^{2}} = \frac{3}{4}x^{-2}, not 12x−212x^{-2} or 34x2\frac{3}{4}x^{2}. Only the power of xx changes sign.
  • Differentiating each factor of a product. Expand (2x+1)(x−3)(2x + 1)(x - 3) to 2x2−5x−32x^{2} - 5x - 3 first, then differentiate.
  • Mixing up f(a)f(a) and f′(a)f'(a), or a value and a rate. The gradient or rate at x=ax = a is f′(a)f'(a); f(a)f(a) is the yy-coordinate.

Exam tips

  • "Find f′(x)f'(x)": show the line where you rewrite terms as powers, such as 4x3=4x−3\frac{4}{x^{3}} = 4x^{-3}. Marks are often given per correct term, so a slip in one term doesn't cost the others.
  • "Write down the gradient at x=1x = 1" after finding f′(x)f'(x): substitute into f′f'. If your f′(x)f'(x) was wrong but you use it correctly, you can still earn follow-through (FT) marks.
  • "Interpret" f′(a)f'(a): give the rate with units of yy per unit of xx, in context, and say whether the quantity is increasing or decreasing.
  • When the GDC solves an equation in f′(x)f'(x), write down the derivative and the equation first. A bare GDC answer earns marks only if it is correct; give it to 3 s.f. and reject solutions outside the domain.

Key takeaways

In bookletf(x)=xn⇒f′(x)=nxn−1f(x) = x^{n} \Rightarrow f'(x) = nx^{n-1}
Learn thisFor an integer nn, axnax^{n} differentiates to anxn−1anx^{n-1}: multiply by the power, then lower the power by one.
Learn thisA constant term differentiates to 00, and axax differentiates to aa.
Learn thisRewrite axn\frac{a}{x^{n}} as ax−nax^{-n} before differentiating. One less than −n-n is −n−1-n - 1.
Learn thisddx(f(x)+g(x))=f′(x)+g′(x)\frac{\mathrm{d}}{\mathrm{d}x}\left(f(x) + g(x)\right) = f'(x) + g'(x)
Learn thisDifferentiate a sum term by term. Expand brackets and split a fraction with a single-term denominator first; never multiply the derivatives of the factors.
Learn thisThe gradient of y=f(x)y = f(x) at x=ax = a is f′(a)f'(a). The height of the curve there is f(a)f(a).

Practise this

5 past-paper questions on Introduction to differentiation in the AI HL bank, each with a mark scheme and a worked explanation.

Practise Introduction to differentiation →