5.5 · SLPaper 1Paper 2

Antidifferentiation, definite integrals and area

In a minute

Integration runs differentiation backwards: given a rate of change, you rebuild the function, then use one known point to pin down its constant. A , found on your GDC, turns a rate into a total change. For a curve above the xx-axis, it is also the area under the curve.

You'll be able to

  • Integrate a sum of terms axnax^{n}, for integers n≠−1n \neq -1, ending with + C+\,C.
  • Use a to find the constant, and interpret it in context.
  • Evaluate a definite integral on your GDC and interpret it as a total change.
  • Write the integral for the area between a curve above the xx-axis and the axis, then evaluate it.
  • Explain how , definite integrals and area are linked.
Before you start2 quick questions on what this builds on
Check yourself
Differentiate y=0.5x4−3x2+7x−1y = 0.5x^{4} - 3x^{2} + 7x - 1.
Check yourself
Write 6x2\frac{6}{x^{2}} as a number times a power of xx.

Revise first: 5.3 Differentiation of integer-power polynomials

Integration undoes differentiation

Differentiating x4x^{4} gives 4x34x^{3}. Now ask the reverse question: which function has derivative 4x34x^{3}? One answer is x4x^{4}.

Going from a derivative back to a function is called antidifferentiation, or integration. The function you get is an .

x4+3x^{4} + 3 and x4−10x^{4} - 10 also differentiate to 4x34x^{3}, because a constant differentiates to 00. So every antiderivative of 4x34x^{3} is x4+Cx^{4} + C, where CC is the .

The multiplies by the power, then lowers it by one. To undo it, raise the power by one, then divide by the new power.

In the formula booklet
∫xn dx=xn+1n+1+C,n≠−1\int x^{n}\,\mathrm{d}x = \frac{x^{n+1}}{n+1} + C,\quad n \neq -1

This rule is in the formula booklet, so you don't need to memorise it. In this lesson nn is an integer, positive, zero or negative, but never −1-1.

Worked exampleFind ∫(9x2−0.8x+6) dx\int (9x^{2} - 0.8x + 6)\,\mathrm{d}x.

Try it first, then reveal one step at a time.

  1. Take one term at a time. 9x29x^{2}: raise the power to 33 and divide by 33, giving 3x33x^{3}.
Check yourself
Find ∫12x5 dx\int 12x^{5}\,\mathrm{d}x.

Negative powers work the same way, as long as the power is not −1-1. First rewrite each term as axnax^{n}: 8x3=8x−3\frac{8}{x^{3}} = 8x^{-3}. Raising −3-3 by one gives −2-2, not −4-4.

Why not n=−1n = -1? The rule would divide by n+1=0n + 1 = 0, so ∫1x dx\int \frac{1}{x}\,\mathrm{d}x needs a different rule.

Worked exampleFind ∫(6x−8x3)dx\int \left(6x - \frac{8}{x^{3}}\right)\mathrm{d}x, for x≠0x \neq 0.

Try it first, then reveal one step at a time.

  1. Rewrite every term as a power of xx: 6x−8x−36x - 8x^{-3}.
Check yourself
Find ∫x(3x−4) dx\int x(3x - 4)\,\mathrm{d}x.
Check yourself
NN people are inside a stadium tt minutes after timing starts. People enter at a rate of dNdt=900−30t\frac{\mathrm{d}N}{\mathrm{d}t} = 900 - 30t per minute, for 0≤t≤300 \le t \le 30, so N=900t−15t2+CN = 900t - 15t^{2} + C. What does CC represent?

Finding the constant

∫(2x−2) dx=x2−2x+C\int (2x - 2)\,\mathrm{d}x = x^{2} - 2x + C is a whole family of curves. Each value of CC moves the curve up or down, without changing its gradient at any xx.

-1 1 2 3 -2 2 4 6 x y C = -2 C = -1 C = 0 C = 1 C = 2 (3, 4)
Only one curve of the family y=x2−2x+Cy = x^{2} - 2x + C passes through (3,4)(3, 4): the one with C=1C = 1.

To pick out one curve you need one more fact, such as a point on it. This is a , and it fixes the . One point fixes CC only on a domain with no breaks: with a term like 5x2\frac{5}{x^{2}}, work on x>0x > 0 or on x<0x < 0, not both.

1. Integrate, and include + C+\,C.

2. Substitute the known xx and yy values into the integrated function, not into the derivative.

3. Solve for CC, then write the full function with the value of CC in it.

Worked exampleA curve has gradient function dydx=4x3+3x2−5\frac{\mathrm{d}y}{\mathrm{d}x} = 4x^{3} + 3x^{2} - 5, and it passes through the point (1,6)(1, 6). Find the equation of the curve.

Try it first, then reveal one step at a time.

  1. Integrate term by term, with + C+\,C: y=x4+x3−5x+Cy = x^{4} + x^{3} - 5x + C.
Worked exampleIn a dry spell, the volume of water in a reservoir, VV million litres, changes at the rate dVdt=0.12t2−3.6t\frac{\mathrm{d}V}{\mathrm{d}t} = 0.12t^{2} - 3.6t, where tt is in days, 0≤t≤300 \le t \le 30. After 1010 days the volume is 412412 million litres. (a) Express VV as a function of tt. (b) Interpret the constant term.

Try it first, then reveal one step at a time.

  1. (a) Integrate, with + C+\,C: V=0.04t3−1.8t2+CV = 0.04t^{3} - 1.8t^{2} + C.
Check yourself
A curve has dydx=8x−3\frac{\mathrm{d}y}{\mathrm{d}x} = 8x - 3, and y=20y = 20 when x=2x = 2. Find the value of the constant of integration, CC.
Check yourself
Given f′(x)=3x2−5x2f'(x) = 3x^{2} - \frac{5}{x^{2}}, for x>0x > 0, and f(2)=10f(2) = 10, find f(x)f(x).

Definite integrals on your GDC

An indefinite integral is a function. Put a number at each end of the integral sign and you get a single number instead: a .

In AI the GDC evaluates definite integrals. Your job is to write the integral correctly and key it in exactly as written.

Continuous means no breaks in the graph between aa and bb. A term like 4x2\frac{4}{x^{2}} breaks at x=0x = 0.

Worked exampleUse your GDC to find ∫26(0.3x2+1.5x−4x2)dx\int_{2}^{6} \left(0.3x^{2} + 1.5x - \frac{4}{x^{2}}\right)\mathrm{d}x. Give your answer to 3 s.f.

Try it first, then reveal one step at a time.

  1. The interval 2≤x≤62 \le x \le 6 does not include x=0x = 0, where 4x2\frac{4}{x^{2}} breaks.
Worked exampleWater flows into a tank at R(t)=12+1.5t−0.1t2R(t) = 12 + 1.5t - 0.1t^{2} litres per minute, where tt is in minutes, 0≤t≤150 \le t \le 15. (a) Write down an integral for the volume that flows in during the first 1010 minutes. (b) Find this volume and interpret it.

Try it first, then reveal one step at a time.

  1. (a) Integrating a rate gives a total change, from t=0t = 0 to t=10t = 10: ∫010(12+1.5t−0.1t2) dt\int_{0}^{10} (12 + 1.5t - 0.1t^{2})\,\mathrm{d}t.
Check yourself
Use your GDC to find ∫−12(x4−3x+2) dx\int_{-1}^{2} (x^{4} - 3x + 2)\,\mathrm{d}x. Give your answer to 3 s.f.
Check yourself
An oven uses electricity at a rate of E(t)E(t) kilowatts, tt hours after 6 a.m., and ∫13E(t) dt=46\int_{1}^{3} E(t)\,\mathrm{d}t = 46. What does 4646 represent?

Area under a curve

Take the region under y=x2y = x^{2} from x=0x = 0 to x=2x = 2. Cover it with thin rectangles and add their areas. The thinner they are, the closer the total gets to the true area.

Rectangles to an integralDrag the slider
121234

4

Sum = 2.625

Exact ∫₀² x² dx = 8/3 ≈ 2.667

Error = −0.042

More, thinner rectangles squeeze the sum towards the exact area ∫₀² x² dx = 8/3. Left sums fall short and right sums overshoot because x² is increasing.

The totals head towards 83≈2.667\frac{8}{3} \approx 2.667, the value of ∫02x2 dx\int_{0}^{2} x^{2}\,\mathrm{d}x. Each rectangle is f(x)f(x) times a small width: that is where f(x) dxf(x)\,\mathrm{d}x comes from, and ∫\int is a stretched S for "sum".

Learn this
A=∫aby dxA = \int_{a}^{b} y\,\mathrm{d}x

AA is the area between y=f(x)y = f(x), the xx-axis and the lines x=ax = a and x=bx = b, with a<ba < b. It holds when f(x)≥0f(x) \ge 0 for every xx from aa to bb.

Where the curve is below the xx-axis, with a<ba < b, the definite integral is negative, so it is not an area. In this lesson every region lies above the axis, and a negative area means a slip.

So antiderivatives give definite integrals, and the definite integral of a function above the axis is an area.

Worked exampleFind the area of the region between the curve y=0.5x2+1y = 0.5x^{2} + 1, the xx-axis and the lines x=1x = 1 and x=3x = 3. Give your answer to 3 s.f.

Try it first, then reveal one step at a time.

  1. The curve is above the xx-axis: 0.5x2+1≥10.5x^{2} + 1 \ge 1.

For a region enclosed by the curve and the xx-axis alone, the limits are where the curve meets the axis. Find these zeros on your GDC and keep their full values.

-2 2 4 6 8 10 1 2 3 4 5 x y opening arch water level
The opening under the arch is the region enclosed by y=2.6+0.85x−0.11x2y = 2.6 + 0.85x - 0.11x^{2} and the xx-axis.
Worked exampleThe underside of a bridge arch is modelled by y=2.6+0.85x−0.11x2y = 2.6 + 0.85x - 0.11x^{2}, where xx and yy are in metres and the xx-axis is the water level. Find the area of the opening between the arch and the water. Give your answer to 3 s.f.

Try it first, then reveal one step at a time.

  1. The opening runs between the points where the arch meets the water. Find the zeros of 2.6+0.85x−0.11x22.6 + 0.85x - 0.11x^{2} on your GDC: x=−2.34635…x = -2.34635\ldots and x=10.0736…x = 10.0736\ldots
Check yourself
The curve y=0.4x3−2x+5y = 0.4x^{3} - 2x + 5 is above the xx-axis for 0≤x≤30 \le x \le 3. Use your GDC to find the area under it from x=0x = 0 to x=3x = 3, to 3 s.f.
Check yourself
The curve y=12+x−x2y = 12 + x - x^{2} and the xx-axis enclose a region. Find its area, to 3 s.f.

With only a table of values, estimate the area with trapezoids instead: see 5.8.

Common mistakes

  • Leaving out + C+\,C. A boundary condition then has no constant to find.
  • Substituting the given point into the derivative. It goes into y=…+Cy = \ldots + C, the integrated function.
  • Differentiating instead of integrating. ∫6x2 dx=2x3+C\int 6x^{2}\,\mathrm{d}x = 2x^{3} + C, not 12x12x.
  • Raising a negative power the wrong way. ∫x−3 dx=x−2−2+C\int x^{-3}\,\mathrm{d}x = \frac{x^{-2}}{-2} + C: one more than −3-3 is −2-2.
  • An area integral without dx\mathrm{d}x, with swapped limits, or with the derivative as the function. A negative area shows something is wrong.
  • A bare or early-rounded GDC answer. Write the integral or equation first, and keep full values of zeros used as limits.

Exam tips

  • "Find an expression for f(x)f(x)": show the integration with + C+\,C, the substituted point, and f(x)f(x) with the value of CC in it.
  • "Write down the integral" for an area: lower limit at the bottom, upper at the top, the function, and dx\mathrm{d}x.
  • "Interpret" a definite integral of a rate: it is the total change over the interval, in context, with units.
  • On GDC parts, write the integral or equation you entered, then the answer to 3 s.f. A bare wrong answer earns nothing.

Key takeaways

In booklet∫xn dx=xn+1n+1+C,n≠−1\int x^{n}\,\mathrm{d}x = \frac{x^{n+1}}{n+1} + C,\quad n \neq -1
Learn thisIntegrate a sum one term at a time: axnax^{n} becomes axn+1n+1\frac{ax^{n+1}}{n+1}, for integers n≠−1n \neq -1. Rewrite axn\frac{a}{x^{n}} as ax−nax^{-n} and expand brackets first, and end with one + C+\,C.
Learn thisBoundary condition, on a domain with no breaks: integrate with + C+\,C, substitute the known point into the integrated function (not the derivative), solve for CC, then write the full function.
Learn thisIf F′(x)=f(x)F'(x) = f(x) and ff is continuous for a≤x≤ba \le x \le b, then ∫abf(x) dx=F(b)−F(a)\int_{a}^{b} f(x)\,\mathrm{d}x = F(b) - F(a). Integrating a rate of change gives the total change, in units of the rate times units of xx.
Learn thisIf f(x)≥0f(x) \ge 0 for a≤x≤ba \le x \le b, the area between y=f(x)y = f(x), the xx-axis and the lines x=ax = a and x=bx = b is A=∫abf(x) dxA = \int_{a}^{b} f(x)\,\mathrm{d}x. Write this integral down before you evaluate it on the GDC.

Practise this

5 past-paper questions on Introduction to integration in the AI HL bank, each with a mark scheme and a worked explanation.

Also: Applications of integration (28)

Practise Introduction to integration →