5.2 · SLPaper 1Paper 2

Increasing and decreasing functions

In a minute

A function is where its graph rises from left to right, and where it falls. The sign of the tells you which: f′(x)>0f'(x) > 0 means rising, f′(x)<0f'(x) < 0 means falling, and f′(x)=0f'(x) = 0 means a flat tangent at a . In a model, this tells you when a quantity such as a population, a profit or a temperature is going up or down.

You'll be able to

  • Decide whether a function is or at a point from the sign of f′(x)f'(x), and say what that means in context.
  • Describe what f′(x)>0f'(x) > 0, f′(x)=0f'(x) = 0 and f′(x)<0f'(x) < 0 look like on the graph of y=f(x)y = f(x).
  • Read when a quantity is increasing or decreasing from a graph of its rate of change.
  • Find the intervals where a function is increasing or decreasing, from f′(x)f'(x) or with your GDC.
Before you start3 quick questions on what this builds on
Check yourself
Find the of the line through (2,9)(2, 9) and (6,−3)(6, -3).
Check yourself
A function has derivative f′(x)=3x2−12f'(x) = 3x^{2} - 12. Find f′(−1)f'(-1).
Check yourself
Use your GDC to find the xx-coordinate of the point of y=x3−4x+1y = x^{3} - 4x + 1. Give it to 3 s.f.

Revise first: 2.1 Straight-line equations, 2.4 Key features of graphs and 5.1 Limits and the derivative as a rate of change

The sign of the derivative

Picture walking along the graph of y=f(x)y = f(x) from left to right. Where the path climbs, the function is . Where it drops, the function is .

In 5.1 you met f′(x)f'(x) as the gradient of the tangent. Climbing means tangents slope up, so f′(x)>0f'(x) > 0; dropping means f′(x)<0f'(x) < 0.

Where f′(x)=0f'(x) = 0, the tangent is horizontal and the graph is flat for an instant. A point like this is a .

The graph often turns at a stationary point, but not always. y=x3y = x^{3} has a horizontal tangent at the origin, yet it rises on both sides of it. You will sort out these cases in 5.6.

Move the slider along f(x)=x3−3xf(x) = x^{3} - 3x. Its derivative is f′(x)=3x2−3f'(x) = 3x^{2} - 3; you will learn to find it in 5.3. Watch the sign of f′(x)f'(x) change at x=−1x = -1 and x=1x = 1, where the tangent is flat.

The sign of the derivativeDrag the slider
−2−112−4−3−2−11234increasingdecreasing○ stationary: x = ±1

f(x) = x³ − 3x, so f′(x) = 3x² − 3

−1.5

f′(−1.5) = 3.75 (increasing)

Where f′(x) > 0 the tangent slopes up and f is increasing; where f′(x) < 0 it is decreasing. The sign changes at the stationary points, where f′(x) = 0.

In a model, f′(x)f'(x) is a rate of change. Its sign tells you whether the quantity is going up or down at that moment.

Worked exampleA shop's weekly profit is PP thousand dollars when it spends xx thousand dollars a week on adverts. A model gives dPdx=4−0.5x\dfrac{\mathrm{d}P}{\mathrm{d}x} = 4 - 0.5x, for 0≤x≤160 \le x \le 16. (a) Find dPdx\dfrac{\mathrm{d}P}{\mathrm{d}x} when x=10x = 10. (b) Is the profit increasing or decreasing at this level of spending? Interpret your answer.

Try it first, then reveal one step at a time.

  1. (a) Substitute x=10x = 10: dPdx=4−0.5×10=−1\dfrac{\mathrm{d}P}{\mathrm{d}x} = 4 - 0.5 \times 10 = -1.
Worked exampleThe number of birds in a nature reserve is BB, tt years after it opens. A model gives dBdt=90−6t\dfrac{\mathrm{d}B}{\mathrm{d}t} = 90 - 6t, for 0≤t≤250 \le t \le 25. (a) Find the value of tt for which dBdt=0\dfrac{\mathrm{d}B}{\mathrm{d}t} = 0. (b) Describe how the number of birds changes before and after this time.

Try it first, then reveal one step at a time.

  1. (a) Set the rate equal to zero: 90−6t=090 - 6t = 0, so 6t=906t = 90 and t=15t = 15.
Check yourself
A function has derivative f′(x)=x2−7x+10f'(x) = x^{2} - 7x + 10. At x=4x = 4, is ff increasing, decreasing or stationary?
Check yourself
The volume of water in a pond is VV m³, tt days after a dry spell starts. When t=6t = 6, dVdt=0\frac{\mathrm{d}V}{\mathrm{d}t} = 0. Which statement must be true?

Reading increasing and decreasing from graphs

On the graph of y=f(x)y = f(x), look at the direction of the curve. It rises where f′(x)>0f'(x) > 0 and falls where f′(x)<0f'(x) < 0. At a or , the tangent is horizontal, so f′(x)=0f'(x) = 0.

1 2 3 4 −1 1 2 3 4 5 6 x y local max (1, 5) local min (3, 1) y = f(x)
The graph of y=f(x)y = f(x), where f(x)=x3−6x2+9x+1f(x) = x^{3} - 6x^{2} + 9x + 1.
Worked exampleUse the graph of y=f(x)y = f(x) above. (a) Write down the interval on which ff is decreasing. (b) Write down the values of xx for which f′(x)=0f'(x) = 0.

Try it first, then reveal one step at a time.

  1. (a) Read the curve from left to right. It rises up to the local maximum at x=1x = 1, falls down to the local minimum at x=3x = 3, then rises again.
Check yourself
Use the same graph of y=f(x)y = f(x). What is the sign of f′(2)f'(2)?

Sometimes you are given the graph of the rate of change, y=f′(x)y = f'(x), not the graph of ff. Don't read it as if it were ff. Look only at its sign: is the curve above or below the horizontal axis?

Above the axis, f′(x)>0f'(x) > 0, so ff is . Below it, f′(x)<0f'(x) < 0, so ff is . Where the curve meets the axis, f′(x)=0f'(x) = 0, and the graph of ff has a horizontal tangent: a .

1 2 3 4 5 6 7 8 9 10 −8 −6 −4 −2 2 4 t (hours) dT/dt (°C per hour) (3, 4) y = dT/dt
The graph of y=dTdty = \frac{\mathrm{d}T}{\mathrm{d}t} for a greenhouse. It shows how fast the temperature changes, not the temperature itself.
Worked exampleThe temperature in a greenhouse is TT °C, tt hours after 06:00. Its rate of change, shown in the graph above, is modelled by dTdt=0.25(7−t)(t+1)\dfrac{\mathrm{d}T}{\mathrm{d}t} = 0.25(7 - t)(t + 1), for 0≤t≤100 \le t \le 10. (a) Find the values of tt for which the temperature is increasing. (b) Interpret your answer in context.

Try it first, then reveal one step at a time.

  1. (a) TT is increasing where dTdt>0\dfrac{\mathrm{d}T}{\mathrm{d}t} > 0: where the graph is above the tt-axis.
Check yourself
Use the same model, dTdt=0.25(7−t)(t+1)\frac{\mathrm{d}T}{\mathrm{d}t} = 0.25(7 - t)(t + 1) for 0≤t≤100 \le t \le 10. Write down the value of tt at which the greenhouse is hottest.
Check yourself
At t=5t = 5, the graph of dTdt\frac{\mathrm{d}T}{\mathrm{d}t} is going down. Is the temperature increasing or decreasing at t=5t = 5?

Finding the intervals

You need the sign of f′(x)f'(x) for every xx. For the integer-power functions of this lesson, f′(x)f'(x) can only change sign where f′(x)=0f'(x) = 0 or where ff is undefined. (At HL, with fractional powers, also check where f′f' is undefined but ff is not: y=x2/3y = x^{2/3} turns at x=0x = 0.) Those values cut the number line into pieces, and the sign stays the same on each piece.

1. Find where f′(x)=0f'(x) = 0, and any values where ff or f′f' is undefined, such as a vertical asymptote.

2. Find the sign of f′(x)f'(x) on each piece. Sketch y=f′(x)y = f'(x), or test one value in each piece.

3. Answer with inequalities: f′(x)>0f'(x) > 0 where ff is , f′(x)<0f'(x) < 0 where it is . In a model, keep inside its domain.

Worked exampleA function ff has derivative f′(x)=x2+2x−15f'(x) = x^{2} + 2x - 15. Find the values of xx for which ff is increasing.

Try it first, then reveal one step at a time.

  1. ff is increasing where f′(x)>0f'(x) > 0, so solve x2+2x−15>0x^{2} + 2x - 15 > 0.
Check yourself
The function g(x)=2x+18xg(x) = 2x + \frac{18}{x}, x≠0x \ne 0, has derivative g′(x)=2−18x2g'(x) = 2 - \frac{18}{x^{2}}. Find the values of xx for which gg is decreasing.

On Paper 2 you may be given only the model f(x)f(x). You don't need f′(x)f'(x): graph y=f(x)y = f(x) on your GDC and find its local maximum and minimum points, as in 2.4. At those points f′(x)=0f'(x) = 0, and between them a graph with no breaks only rises or only falls.

Worked exampleThe volume of water in a reservoir is VV million litres, tt months after 1 January. It is modelled by V(t)=0.05t3−0.9t2+3.6t+40V(t) = 0.05t^{3} - 0.9t^{2} + 3.6t + 40, for 0≤t≤120 \le t \le 12. (a) Use your GDC to find the values of tt for which VV is decreasing. Give the end points to 3 s.f. (b) Interpret your answer in context.

Try it first, then reveal one step at a time.

  1. (a) Write down what you graph: y=0.05x3−0.9x2+3.6x+40y = 0.05x^{3} - 0.9x^{2} + 3.6x + 40 for 0≤x≤120 \le x \le 12. A window of 0≤y≤500 \le y \le 50 shows the whole curve.

Common mistakes

  • Giving only the end points of f′(x)=0f'(x) = 0 as the answer. They show where the sign can change; the answer is an inequality such as x>3x > 3 or 1<x<31 < x < 3.
  • Reading a graph of y=f′(x)y = f'(x) as if it were ff. A rate graph that is going down but is still above the axis means the quantity is still increasing, just more slowly.
  • Writing one interval across a value where ff is undefined, such as a vertical asymptote. Split the answer into two pieces there.
  • Giving a GDC answer with no working, or rounding the turning points before you use them. Write down the function you graphed, keep the full values, and round each end point to 3 s.f. at the end.
  • Treating every stationary point as a maximum or minimum. f′(x)=0f'(x) = 0 only says the tangent is horizontal, so check the sign of f′(x)f'(x) on both sides.

Exam tips

  • "Show that ff is increasing at x=ax = a": find f′(a)f'(a), write down its value, and state that it is positive. The comparison with 0 is the reasoning mark.
  • "Interpret" a zero rate, such as dPdt=0\frac{\mathrm{d}P}{\mathrm{d}t} = 0: say in the context's words that the quantity is, at that moment, neither increasing nor decreasing.
  • "Write down the interval": give an inequality or an interval, not a single value, and keep to the model's domain. Use 3 s.f. for end points read from a GDC.

Key takeaways

Learn thisIf f′(x)>0f'(x) > 0 for every xx in an interval, ff is increasing on that interval: its graph rises from left to right.
Learn thisIf f′(x)<0f'(x) < 0 for every xx in an interval, ff is decreasing on that interval: its graph falls from left to right.
Learn thisf′(x)=0f'(x) = 0 at a stationary point, where the tangent is horizontal. It may be a local maximum, a local minimum or neither.
Learn thisOn a graph of y=f′(x)y = f'(x), read only the sign: where it is above the horizontal axis ff is increasing, and where it is below, ff is decreasing.
Learn thisTo find the intervals: find where f′(x)=0f'(x) = 0 or ff or f′f' is undefined, find the sign of f′(x)f'(x) on each piece, then answer with inequalities inside the domain.

Practise this

5 past-paper questions on Introduction to differentiation in the AI HL bank, each with a mark scheme and a worked explanation.

Practise Introduction to differentiation →