5.13 · AHL · HL onlyPaper 1Paper 2Paper 3

Kinematics

In a minute

ss, vv and aa are linked by calculus: differentiate to go from ss to vv to aa, and integrate to go back. is the size of vv. counts every metre, either way, so it integrates ∣v∣\lvert v\rvert.

You'll be able to

  • Differentiate displacement to find velocity and acceleration, and find when an object is at rest.
  • Use x˙\dot{x} and x¨\ddot{x} for the first and second time .
  • Find speed as the magnitude of velocity, and tell when an object speeds up or slows down.
  • Use a=vdvdsa = v\frac{\mathrm{d}v}{\mathrm{d}s} when velocity is given in terms of displacement.
  • Find displacement as ∫t1t2v(t) dt\int_{t_{1}}^{t_{2}} v(t)\,\mathrm{d}t and distance travelled as ∫t1t2∣v(t)∣ dt\int_{t_{1}}^{t_{2}} \lvert v(t)\rvert\,\mathrm{d}t, and interpret both.
Before you start3 quick questions on what this builds on
Check yourself
Differentiate 8e−0.5t8\mathrm{e}^{-0.5t} with respect to tt.
Check yourself
Find f′′(t)f''(t) for f(t)=2t3−5t2+tf(t) = 2t^{3} - 5t^{2} + t.
Check yourself
Find ∫13(4t−1) dt\int_{1}^{3} (4t - 1)\,\mathrm{d}t.

Revise first: 3.10 Vectors in 2D and 3D, 3.12 Kinematics with vectors, 5.1 Limits and the derivative as a rate of change, 5.5 Antidifferentiation, definite integrals and area, 5.9 Differentiation rules and related rates and 5.10 Second derivative and concavity

Displacement, velocity and acceleration

Fix a point O on a straight line and choose one direction as positive. An object's displacement ss is its position measured from O: positive on one side, negative on the other.

The of ss with time is the velocity vv. The rate of change of vv is the acceleration aa.

Learn this
v=dsdtv = \frac{\mathrm{d}s}{\mathrm{d}t}
In the formula booklet
a=dvdt=d2sdt2=vdvdsa = \frac{\mathrm{d}v}{\mathrm{d}t} = \frac{\mathrm{d}^{2}s}{\mathrm{d}t^{2}} = v\frac{\mathrm{d}v}{\mathrm{d}s}

The acceleration line is in the booklet; learn the velocity line. The form vdvdsv\frac{\mathrm{d}v}{\mathrm{d}s} has its own section below.

With ss in metres and tt in seconds, vv is in m s−1\text{m s}^{-1} and aa in m s−2\text{m s}^{-2}. An object is at rest when v=0v = 0, and "initially" means at t=0t = 0.

Worked exampleA warehouse robot moves along a straight rail. Its displacement from a charging point O is s=0.5t3−4.5t2+12ts = 0.5t^{3} - 4.5t^{2} + 12t metres, where tt is the time in seconds, 0≤t≤60 \le t \le 6. Find when the robot is at rest, and its acceleration at each of those times. Interpret your answers.

Try it first, then reveal one step at a time.

  1. Differentiate for the velocity: v=dsdt=1.5t2−9t+12v = \frac{\mathrm{d}s}{\mathrm{d}t} = 1.5t^{2} - 9t + 12.
Check yourself
A particle moves in a straight line with displacement s=t3−10.5t2+18ts = t^{3} - 10.5t^{2} + 18t metres at time tt seconds, t≥0t \ge 0. It is at rest twice. Find its acceleration, in m s−2\text{m s}^{-2}, the second time it is at rest.

A dot over a letter means its derivative with respect to time: one dot for once, two dots for twice.

Learn this
x˙=dxdt,x¨=d2xdt2\dot{x} = \frac{\mathrm{d}x}{\mathrm{d}t}, \qquad \ddot{x} = \frac{\mathrm{d}^{2}x}{\mathrm{d}t^{2}}

So if xx is a displacement, x˙\dot{x} is the velocity and x¨\ddot{x} the acceleration. Dots always mean ddt\frac{\mathrm{d}}{\mathrm{d}t}, never a derivative with respect to xx.

Worked exampleA train leaves a station along a straight track. Its displacement from the station after tt seconds is x=25t−625+625e−0.04tx = 25t - 625 + 625\mathrm{e}^{-0.04t} metres. (a) Find x˙\dot{x} and x¨\ddot{x}. (b) Find the train's velocity after 3030 seconds, to 3 s.f. (c) Describe what happens to x˙\dot{x} and x¨\ddot{x} as tt increases, and comment on the model.

Try it first, then reveal one step at a time.

  1. (a) Differentiate, with the chain rule on the exponential: x˙=25+625×(−0.04)e−0.04t=25−25e−0.04t\dot{x} = 25 + 625 \times (-0.04)\mathrm{e}^{-0.04t} = 25 - 25\mathrm{e}^{-0.04t}.
Check yourself
A swimmer's displacement from the end of a pool is xx metres after tt seconds. At t=8t = 8, x˙=1.2\dot{x} = 1.2 and x¨=−0.3\ddot{x} = -0.3. What do these values tell you?

Speed and direction

The sign of vv gives the direction: v>0v > 0 means moving in the positive direction, v<0v < 0 the negative direction.

A lift going down at 3 m s−13\text{ m s}^{-1}, with up positive, has velocity −3 m s−1-3\text{ m s}^{-1} but speed 3 m s−13\text{ m s}^{-1}. For vector velocities, see 3.12.

Worked exampleA ball is thrown straight up. Taking up as positive, its velocity is v=14−9.8tv = 14 - 9.8t in m s−1\text{m s}^{-1}, tt seconds after it is thrown, until it lands. Find the speed of the ball at t=2t = 2, and its direction of motion then.

Try it first, then reveal one step at a time.

  1. Substitute: v(2)=14−19.6=−5.6 m s−1v(2) = 14 - 19.6 = -5.6\text{ m s}^{-1}.
Worked exampleA remote-controlled car moves along a straight test track with velocity v=0.5t2−5.5t+12v = 0.5t^{2} - 5.5t + 12 in m s−1\text{m s}^{-1}, for 0≤t≤100 \le t \le 10 seconds. Find the intervals of time when it is speeding up.

Try it first, then reveal one step at a time.

  1. Factorise: v=0.5(t−3)(t−8)v = 0.5(t - 3)(t - 8). So v>0v > 0 for 0≤t<30 \le t < 3 and 8<t≤108 < t \le 10, and v<0v < 0 for 3<t<83 < t < 8.
Check yourself
A drone flies with velocity (6−2.5) m s−1\begin{pmatrix}6\\-2.5\end{pmatrix}\text{ m s}^{-1}. Find its speed, in m s−1\text{m s}^{-1}.
Check yourself
At one moment a cyclist on a straight road has v=−3 m s−1v = -3\text{ m s}^{-1} and a=−1.5 m s−2a = -1.5\text{ m s}^{-2}. Which is true at that moment?

Acceleration in terms of displacement

Sometimes you know the velocity at each position, not each time: a test track might log a car's speed at every distance marker. Then vv is a function of ss, and the chain rule gives aa.

dvds\frac{\mathrm{d}v}{\mathrm{d}s} alone is the change in velocity per metre. Multiplying by vv turns it into the change per second.

Worked exampleA cyclist rides along a straight road. Her velocity is v=3+0.25sv = 3 + 0.25s in m s−1\text{m s}^{-1} when her displacement from the start is ss metres, for 0≤s≤400 \le s \le 40. Find her acceleration when s=20s = 20, and interpret it.

Try it first, then reveal one step at a time.

  1. Differentiate with respect to ss: dvds=0.25\frac{\mathrm{d}v}{\mathrm{d}s} = 0.25.

A shortcut when v2v^{2} is simple: by the chain rule, dds(12v2)=vdvds=a\frac{\mathrm{d}}{\mathrm{d}s}\left(\tfrac{1}{2}v^{2}\right) = v\frac{\mathrm{d}v}{\mathrm{d}s} = a.

Worked exampleA car brakes on a straight road. After it has travelled ss metres from the point where braking starts, its velocity is v=625−10sv = \sqrt{625 - 10s} in m s−1\text{m s}^{-1}. (a) Find the acceleration of the car. (b) Find the stopping distance, and interpret your answers.

Try it first, then reveal one step at a time.

  1. (a) Square to simplify: v2=625−10sv^{2} = 625 - 10s, so 12v2=312.5−5s\tfrac{1}{2}v^{2} = 312.5 - 5s.
Check yourself
An object moves in a straight line. Its velocity is v=0.2s2+3v = 0.2s^{2} + 3 in m s−1\text{m s}^{-1} when its displacement is ss metres. Find its acceleration, in m s−2\text{m s}^{-2}, when s=5s = 5.
Check yourself
For the cyclist with v=3+0.25sv = 3 + 0.25s, a student says her acceleration is 0.25 m s−20.25\text{ m s}^{-2} everywhere. What is wrong?

Displacement from velocity

Now go the other way. Integrating vv gives ss, up to a constant CC that one known position fixes. Likewise integrating aa gives vv; "starts from rest" means v=0v = 0 when t=0t = 0.

Worked exampleAn e-scooter starts from rest at a point O and moves in a straight line. For 0≤t≤50 \le t \le 5 seconds, its acceleration is a=3−0.6ta = 3 - 0.6t in m s−2\text{m s}^{-2}. Find its velocity and its displacement from O at t=5t = 5.

Try it first, then reveal one step at a time.

  1. Integrate aa: v=3t−0.3t2+Cv = 3t - 0.3t^{2} + C. It starts from rest, so v=0v = 0 at t=0t = 0, giving C=0C = 0.

Often you only need the change in position between times t1t_{1} and t2t_{2}. That is s(t2)−s(t1)s(t_{2}) - s(t_{1}), the of vv, and the constant cancels.

In the formula booklet
displacement=∫t1t2v(t) dt\text{displacement} = \int_{t_{1}}^{t_{2}} v(t)\,\mathrm{d}t

This is in the booklet. A negative answer means the object ends on the negative side of where it was at t1t_{1}.

Worked exampleA remote-controlled boat moves along a straight canal. Its velocity is v(t)=2.4cos⁡(0.3t)+0.6v(t) = 2.4\cos(0.3t) + 0.6 in m s−1\text{m s}^{-1}, tt seconds after it starts, for 0≤t≤120 \le t \le 12. Use your GDC to find the displacement of the boat from t=0t = 0 to t=12t = 12. Give your answer to 3 s.f., and interpret it.

Try it first, then reveal one step at a time.

  1. Write down the integral: ∫012(2.4cos⁡(0.3t)+0.6)dt\int_{0}^{12} \left(2.4\cos(0.3t) + 0.6\right)\mathrm{d}t.
Check yourself
A particle has velocity v=0.9t2−6t+8v = 0.9t^{2} - 6t + 8 in m s−1\text{m s}^{-1}. Find its displacement, in metres, from t=1t = 1 to t=4t = 4. Give your answer to 3 s.f.
Check yourself
A particle is at s=5s = 5 when t=1t = 1. Its displacement from t=1t = 1 to t=3t = 3 is −2-2 m. Where is it at t=3t = 3?

Total distance travelled

Distance travelled is what a mileage counter records: every metre counts, forwards or backwards. It is never negative.

In the formula booklet
distance=∫t1t2∣v(t)∣ dt\text{distance} = \int_{t_{1}}^{t_{2}} \lvert v(t)\rvert\,\mathrm{d}t

This is in the booklet. The modulus makes backward stretches count as positive, so nothing cancels. Distance equals the size of the displacement only if the object never changes direction. By hand, split the time where vv changes sign:

1. Solve v=0v = 0 to find the times inside the interval when the object may turn.

2. Integrate vv over each piece between those times.

3. Add the sizes of the pieces, ignoring their signs.

Velocity v = 1.5t squared minus 12t plus 18 for t from 0 to 7: area 16 above the t-axis, then area 16 below it, then area 3.5 above it t v O 2 6 7 v = 1.5t² − 12t + 18 16 16 3.5
The regions between the graph of vv and the tt-axis have areas 1616, 1616 and 3.53.5. The integral of vv gives 16−16+3.5=3.516 - 16 + 3.5 = 3.5; the distance is 16+16+3.5=35.516 + 16 + 3.5 = 35.5.
Worked exampleA 3D-printer head moves along a straight rail with velocity v=1.5t2−12t+18v = 1.5t^{2} - 12t + 18 in cm s−1\text{cm s}^{-1}, for 0≤t≤70 \le t \le 7 seconds. Find the total distance the head travels, and compare it with its displacement.

Try it first, then reveal one step at a time.

  1. Solve v=0v = 0: 1.5(t−2)(t−6)=01.5(t - 2)(t - 6) = 0, so the head may turn at t=2t = 2 and t=6t = 6.

With a GDC, integrate ∣v∣\lvert v\rvert in one go using abs(: TI-84 MATH, NUM; Casio OPTN, NUM; Nspire, type abs( (check on your model).

Worked exampleThe boat above has velocity v(t)=2.4cos⁡(0.3t)+0.6v(t) = 2.4\cos(0.3t) + 0.6 in m s−1\text{m s}^{-1}, for 0≤t≤120 \le t \le 12. Use your GDC to find the total distance the boat travels in these 1212 seconds, to 3 s.f. Find its average speed, and compare the distance with the displacement.

Try it first, then reveal one step at a time.

  1. Write down the integral: distance=∫012∣2.4cos⁡(0.3t)+0.6∣ dt\text{distance} = \int_{0}^{12} \lvert 2.4\cos(0.3t) + 0.6\rvert\,\mathrm{d}t.
Check yourself
A particle has velocity v=5−2tv = 5 - 2t in m s−1\text{m s}^{-1}, for 0≤t≤40 \le t \le 4. Find the total distance, in metres, that it travels. Give your answer to 3 s.f.
Check yourself
A toy car on a straight track has velocity v=5e−0.3t−2v = 5\mathrm{e}^{-0.3t} - 2 in m s−1\text{m s}^{-1}. Use your GDC to find the total distance, in metres, it travels from t=0t = 0 to t=8t = 8. Give your answer to 3 s.f.
Check yourself
A jogger runs along a straight path. Her velocity vv satisfies ∫0600v(t) dt=0\int_{0}^{600} v(t)\,\mathrm{d}t = 0. What does this tell you?

Common mistakes

  • Leaving the GDC in degrees for a velocity with sin⁡\sin or cos⁡\cos: the boat's displacement becomes 36.036.0 m, not 3.663.66 m. Set radians first.
  • Using ∫v dt\int v\,\mathrm{d}t for distance travelled, so backward motion cancels forward motion. Integrate ∣v∣\lvert v\rvert.
  • Mixing up v=0v = 0 and a=0a = 0. At rest means v=0v = 0; where a=0a = 0, the velocity may be at a maximum or minimum.
  • Giving the position s(t2)s(t_{2}) as the displacement from t1t_{1} to t2t_{2}. The displacement is s(t2)−s(t1)s(t_{2}) - s(t_{1}).
  • Writing an integral with no limits or no dt\mathrm{d}t. The method mark needs the correct limits to be seen.

Exam tips

  • "Write down an integral expression" for distance: give ∫t1t2∣v(t)∣ dt\int_{t_{1}}^{t_{2}} \lvert v(t)\rvert\,\mathrm{d}t with the numbers in. The limits, modulus and dt\mathrm{d}t all count.
  • "Find" with a GDC: write the derivative, equation or integral you entered before the value. That set-up earns the method mark even if the value slips.
  • "Justify" a change of direction: show vv changes sign, with a value of vv either side. v=0v = 0 alone is not enough.
  • Give exact answers or 3 s.f., unless the question asks for other accuracy, with units such as m s−1\text{m s}^{-1}, and keep full GDC values for later parts. A wrong earlier answer used correctly can still earn follow-through (FT) marks.

Key takeaways

Learn thisv=dsdtv = \frac{\mathrm{d}s}{\mathrm{d}t}
In bookleta=dvdt=d2sdt2=vdvdsa = \frac{\mathrm{d}v}{\mathrm{d}t} = \frac{\mathrm{d}^{2}s}{\mathrm{d}t^{2}} = v\frac{\mathrm{d}v}{\mathrm{d}s}
Learn thisDot notation means derivatives with respect to time: x˙=dxdt\dot{x} = \frac{\mathrm{d}x}{\mathrm{d}t} and x¨=d2xdt2\ddot{x} = \frac{\mathrm{d}^{2}x}{\mathrm{d}t^{2}}.
Learn thisIn straight-line motion: at rest when v=0v = 0; changes direction when vv changes sign; speed =∣v∣= \lvert v\rvert, the magnitude of the velocity.
Learn thisIn straight-line motion, an object speeds up when vv and aa have the same sign and slows down when their signs differ.
In bookletdisplacement=∫t1t2v(t) dt\text{displacement} = \int_{t_{1}}^{t_{2}} v(t)\,\mathrm{d}t
In bookletdistance=∫t1t2∣v(t)∣ dt\text{distance} = \int_{t_{1}}^{t_{2}} \lvert v(t)\rvert\,\mathrm{d}t
Learn thisDistance by hand: split the interval at each time vv changes sign, integrate vv over each piece, and add the sizes.

Practise this

15 past-paper questions on Kinematics in the AI HL bank, each with a mark scheme and a worked explanation.

Practise Kinematics →