5.4 · SLPaper 1Paper 2

Tangents and normals

In a minute

A is the straight line that touches a curve at a point and has the curve's there. The goes through the same point at right angles to the tangent. For either line you need the point, from f(a)f(a), and the gradient, from f′(a)f'(a), which you find by differentiating or with your GDC.

You'll be able to

  • Write the to y=f(x)y = f(x) at x=ax = a, taking the point from f(a)f(a) and the gradient from f′(a)f'(a).
  • Write the using the negative reciprocal of the tangent's gradient, including when the tangent is horizontal.
  • Find the point where the tangent has a given gradient.
  • Use your GDC to find f′(a)f'(a) and where lines meet curves, then interpret a tangent in context.
Before you start3 quick questions on what this builds on
Check yourself
Differentiate f(x)=2x3−5x+6xf(x) = 2x^{3} - 5x + \frac{6}{x}.
Check yourself
Find the equation of the line through (−3,4)(-3, 4) with gradient −2-2.
Check yourself
A line has gradient 25\frac{2}{5}. What is the gradient of a line perpendicular to it?

Revise first: 2.1 Straight-line equations, 5.1 Limits and the derivative as a rate of change and 5.3 Differentiation of integer-power polynomials

The tangent at a point

Zoom in far enough on a smooth curve and it looks straight. That straight line is the at the point. It touches the curve there and runs in exactly the curve's direction.

In 5.3 you found f′(a)f'(a), the of the curve at x=ax = a. In 2.1 you wrote a line from a point and a gradient. A tangent needs exactly those two things.

In the formula booklet
y=mx+c;ax+by+d=0;y−y1=m(x−x1)y = mx + c; \quad ax + by + d = 0; \quad y - y_{1} = m(x - x_{1})

These forms of a line are in the formula booklet. The last one, the , is the quickest for tangents: put in the point (x1,y1)(x_{1}, y_{1}) and the gradient mm.

1. Find the point. Its xx-coordinate is aa and its yy-coordinate is f(a)f(a).

2. Find the gradient. Differentiate, then substitute: m=f′(a)m = f'(a). It must be a number, with no xx left in it.

3. Put the point and the gradient into y−y1=m(x−x1)y - y_{1} = m(x - x_{1}). Rearrange only if the question asks for a particular form.

Worked exampleFind the equation of the tangent to y=x3−4x2+7y = x^{3} - 4x^{2} + 7 at the point where x=3x = 3.

Try it first, then reveal one step at a time.

  1. Find the point. When x=3x = 3, y=27−36+7=−2y = 27 - 36 + 7 = -2, so the point is (3,−2)(3, -2).
Worked exampleA road on a map is modelled by y=0.05x3−0.6x2+2xy = 0.05x^{3} - 0.6x^{2} + 2x for 0≤x≤80 \le x \le 8, with xx and yy in km east and north of a junction. A car drives along it with xx increasing. At night its headlights shine straight ahead, along the tangent. (a) Find the equation of the tangent where x=2x = 2. (b) A barn stands at B(7,3)B(7, 3). Determine whether the headlights shine on the barn when the car is at x=2x = 2. (c) Interpret the gradient of the tangent.

Try it first, then reveal one step at a time.

  1. (a) Find the point: y=0.05(8)−0.6(4)+2(2)=0.4−2.4+4=2y = 0.05(8) - 0.6(4) + 2(2) = 0.4 - 2.4 + 4 = 2, so the car is at (2,2)(2, 2).
Check yourself
Find the equation of the tangent to y=x3+3x2−1y = x^{3} + 3x^{2} - 1 at the point where x=−1x = -1.

Sometimes a question gives the tangent's gradient and asks for the point. Solve f′(x)=mf'(x) = m for xx, then use ff, not f′f', to find yy.

Check yourself
The tangent to y=0.5x2+3x−4y = 0.5x^{2} + 3x - 4 at the point Q is parallel to the line y=7x+1y = 7x + 1. Find the coordinates of Q.

The normal at a point

"Normal" means "at right angles". The goes through the same point of the curve as the , but crosses the tangent at 90∘90^{\circ}.

Tangent and normal to y = x squared minus 2x plus 3 at P(3, 6) x y O P(3, 6) tangent normal y = x² − 2x + 3
At P(3,6)P(3, 6) the tangent has gradient 44 and the normal has gradient −14-\frac{1}{4}.

In 2.1 you saw that have gradients that multiply to −1-1. So the normal's gradient is the negative reciprocal of the tangent's: flip the fraction and change the sign.

Learn this
mnormal=−1f′(a),f′(a)≠0m_{\text{normal}} = -\frac{1}{f'(a)}, \quad f'(a) \neq 0

The method is the tangent's, with one extra step. Find the point, find f′(a)f'(a), turn it into −1f′(a)-\frac{1}{f'(a)}, then write the line.

Worked exampleFind the equation of the normal to y=x2−2x+3y = x^{2} - 2x + 3 at the point P(3,6)P(3, 6). Give it in the form ax+by+d=0ax + by + d = 0, where a,b,d∈Za, b, d \in \mathbb{Z}.

Try it first, then reveal one step at a time.

  1. Check that P is on the curve: 9−6+3=69 - 6 + 3 = 6. It is.
Check yourself
Find the equation of the normal to y=2x3−6x+1y = 2x^{3} - 6x + 1 at the point where x=1x = 1.
Worked exampleThe cross-section of a greenhouse roof is modelled by y=4−0.25x2y = 4 - 0.25x^{2} for −4≤x≤4-4 \le x \le 4, in metres, with the floor along y=0y = 0. A straight strut is fixed to the roof at the point where x=2x = 2. It runs along the normal to the roof, down to the floor. (a) Find the equation of the normal at x=2x = 2. (b) Find where the strut meets the floor. (c) Find the length of the strut. Give your answer to 3 s.f.

Try it first, then reveal one step at a time.

  1. (a) The point: y=4−0.25(4)=3y = 4 - 0.25(4) = 3, so the strut is fixed at (2,3)(2, 3).
Check yourself
Find the equation of the normal to y=x3−5x+4y = x^{3} - 5x + 4 at the point where x=1x = 1.
Check yourself
The normal to y=0.5x3y = 0.5x^{3} at the point where x=2x = 2 meets the xx-axis. Find the xx-coordinate of the meeting point.

Tangents and normals with a GDC

Many AI models use functions you can't differentiate by hand at SL, such as 68e−0.09t68\mathrm{e}^{-0.09t}. Your GDC still gives f′(a)f'(a) as a number.

The GDC gives only the gradient. You still find the point and write the line. Write down the GDC's value, then keep its full value for the next step.

Worked exampleThe temperature of a cup of coffee is modelled by T(t)=22+68e−0.09tT(t) = 22 + 68\mathrm{e}^{-0.09t} degrees Celsius, tt minutes after it is poured. (a) Use your GDC to find T′(5)T'(5). (b) Find an equation for the tangent line at t=5t = 5. (c) The room is at 2222 degrees. Find the time at which this tangent line reaches 2222. Give your answer to 3 s.f. (d) Interpret your answer, and comment on it.

Try it first, then reveal one step at a time.

  1. (a) Write what you put into the GDC: the of 22+68e−0.09t22 + 68\mathrm{e}^{-0.09t} at t=5t = 5. It gives T′(5)=−3.9022…T'(5) = -3.9022\ldots degrees per minute.
Worked exampleLet f(x)=0.1x3−0.5x2+4f(x) = 0.1x^{3} - 0.5x^{2} + 4. The point P(2,2.8)P(2, 2.8) lies on the graph of ff. (a) Find the equation of the normal at P. (b) The normal meets the graph of ff at two other points. Use your GDC to find their xx-coordinates. Give your answers to 3 s.f.

Try it first, then reveal one step at a time.

  1. (a) Differentiate: f′(x)=0.3x2−xf'(x) = 0.3x^{2} - x, so f′(2)=1.2−2=−0.8f'(2) = 1.2 - 2 = -0.8.
Check yourself
The height of a young tree is modelled by H(t)=251+9e−0.3tH(t) = \frac{25}{1 + 9\mathrm{e}^{-0.3t}} metres, tt years after planting. Use your GDC to find H′(4)H'(4). Then use the tangent at t=4t = 4 to estimate the height at t=5t = 5, in metres. Give your answer to 3 s.f.

Common mistakes

  • Taking the yy-coordinate from f′(a)f'(a) instead of f(a)f(a). The point is on the curve, so use ff. Only the gradient comes from f′f'.
  • Leaving xx in the gradient, as in y+2=(3x2−8x)(x−3)y + 2 = (3x^{2} - 8x)(x - 3). Substitute x=ax = a into f′(x)f'(x) first, so mm is a number.
  • Using the tangent's gradient for the normal. When f′(a)≠0f'(a) \neq 0, the normal's gradient is −1f′(a)-\frac{1}{f'(a)}, and the two gradients multiply to −1-1.
  • Flipping the gradient but not changing its sign, so −2-2 becomes −12-\frac{1}{2} instead of 12\frac{1}{2}.
  • Rounding f′(a)f'(a) from the GDC to 3 s.f. and then using it. Keep the full value until the final answer.
  • Giving both coordinates when a question asks only for xx, or including the point you started from among the "other" intersections.

Exam tips

  • "Write down the equation of the normal" straight after you found its gradient needs no new working: put that gradient and the point into y−y1=m(x−x1)y - y_{1} = m(x - x_{1}). A wrong gradient used correctly can still earn follow-through (FT) marks.
  • "Draw the normal" on given axes: a straight line through the point, crossing the curve at roughly a right angle and with the right intercepts. A line that looks like a tangent loses the mark.
  • "Find" with a GDC: write the equation you solve or the derivative you evaluate, then the result to 3 s.f. The written set-up earns the method mark even if the final value slips.

Key takeaways

Learn thisTangent to y=f(x)y = f(x) at x=ax = a: the point is (a,f(a))(a, f(a)) and the gradient is f′(a)f'(a), so y−f(a)=f′(a)(x−a)y - f(a) = f'(a)(x - a).
Learn thismnormal=−1f′(a),f′(a)≠0m_{\text{normal}} = -\frac{1}{f'(a)}, \quad f'(a) \neq 0
Learn thisIf f′(a)=0f'(a) = 0, the tangent at (a,f(a))(a, f(a)) is y=f(a)y = f(a) and the normal is x=ax = a.
Learn thisTo find where the tangent to y=f(x)y = f(x) has gradient mm, solve f′(x)=mf'(x) = m for xx, then use ff for yy.
Learn thisWith a GDC: write down the value it gives for f′(a)f'(a), keep every digit, write the line, and round only the final answer.

Practise this

39 past-paper questions on Applications of differentiation in the AI HL bank, each with a mark scheme and a worked explanation.

Practise Applications of differentiation →