Geometry and trigonometry cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

Geometry and trigonometry

IB MATHS AA · HL
pastpaperprep.com/revision-notes

3.13D distance, midpoint and measurement

d=(x1−x2)2+(y1−y2)2+(z1−z2)2d = \sqrt{(x_{1} - x_{2})^{2} + (y_{1} - y_{2})^{2} + (z_{1} - z_{2})^{2}}BOOKLET
(x1+x22,y1+y22,z1+z22)\left(\frac{x_{1} + x_{2}}{2}, \frac{y_{1} + y_{2}}{2}, \frac{z_{1} + z_{2}}{2}\right)BOOKLET
V=13AhV = \frac{1}{3}AhBOOKLET
V=13πr2hV = \frac{1}{3}\pi r^{2}hBOOKLET
A=πrlA = \pi r lBOOKLET
l=r2+h2l = \sqrt{r^{2} + h^{2}}LEARN
V=43πr3V = \frac{4}{3}\pi r^{3}BOOKLET
A=4πr2A = 4\pi r^{2}BOOKLET
V=23πr3,Atotal=3πr2V = \frac{2}{3}\pi r^{3}, \quad A_{\text{total}} = 3\pi r^{2}LEARN
Distance in 3D: d=(x1−x2)2+(y1−y2)2+(z1−z2)2d = \sqrt{(x_{1} - x_{2})^{2} + (y_{1} - y_{2})^{2} + (z_{1} - z_{2})^{2}}. The midpoint is the mean of each coordinate.BOOKLET
Pyramid: V=13AhV = \frac{1}{3}Ah. Cone: V=13πr2hV = \frac{1}{3}\pi r^{2}h and curved area πrl\pi r l. Sphere: V=43πr3V = \frac{4}{3}\pi r^{3} and A=4πr2A = 4\pi r^{2}.BOOKLET
Slant height l=r2+h2l = \sqrt{r^{2} + h^{2}}: use hh for a cone's volume and ll for its curved area.LEARN
Solid hemisphere: V=23πr3V = \frac{2}{3}\pi r^{3} and total area 3πr23\pi r^{2}. Combined solids: add volumes, count only outside faces.LEARN
A vertical height is at 90∘90^{\circ} to every line in the base through its foot. From the centre of a square base to a corner is half the diagonal.LEARN
The angle between a line and a plane is the angle between the line and its projection on the plane.LEARN

3.2Triangle trigonometry

sin⁡θ=OH,cos⁡θ=AH,tan⁡θ=OA\sin\theta = \frac{\text{O}}{\text{H}}, \quad \cos\theta = \frac{\text{A}}{\text{H}}, \quad \tan\theta = \frac{\text{O}}{\text{A}}LEARN
asin⁡A=bsin⁡B=csin⁡C\frac{a}{\sin A} = \frac{b}{\sin B} = \frac{c}{\sin C}BOOKLET
c2=a2+b2−2abcos⁡C;cos⁡C=a2+b2−c22abc^{2} = a^{2} + b^{2} - 2ab\cos C; \quad \cos C = \frac{a^{2} + b^{2} - c^{2}}{2ab}BOOKLET
A=12absin⁡CA = \frac{1}{2}ab\sin CBOOKLET
For an angle, undo the ratio with sin⁡−1\sin^{-1}, cos⁡−1\cos^{-1} or tan⁡−1\tan^{-1}, in the angle mode the question uses (usually degrees).LEARN
Sine rule: a side and its opposite angle are known. Cosine rule: two sides and the included angle, or three sides.LEARN
A negative cosine means an obtuse angle. The longest side faces the largest angle.LEARN

3.3Applied triangle trigonometry

a2+b2=c2,sin⁡θ=OH,cos⁡θ=AH,tan⁡θ=OAa^{2} + b^{2} = c^{2}, \qquad \sin\theta = \frac{\text{O}}{\text{H}}, \quad \cos\theta = \frac{\text{A}}{\text{H}}, \quad \tan\theta = \frac{\text{O}}{\text{A}}LEARN
asin⁡A=bsin⁡B=csin⁡C\frac{a}{\sin A} = \frac{b}{\sin B} = \frac{c}{\sin C}BOOKLET
c2=a2+b2−2abcos⁡C;cos⁡C=a2+b2−c22abc^{2} = a^{2} + b^{2} - 2ab\cos C; \quad \cos C = \frac{a^{2} + b^{2} - c^{2}}{2ab}BOOKLET
bearing of A from B=bearing of B from A±180∘\text{bearing of } A \text{ from } B = \text{bearing of } B \text{ from } A \pm 180^{\circ}LEARN
Draw the diagram first: horizontal ground, vertical lines at right angles, every given value and the unknown labelled.LEARN
Elevation and depression are measured from the horizontal. The depression from A to B equals the elevation from B to A.LEARN
A bearing is clockwise from north, with three figures before the decimal point. The back bearing is the bearing ±180∘\pm 180^{\circ}.LEARN
Work in degrees. Store intermediate values and round only the final answer.LEARN

3.4Radians, arc length and sector area

π radians=180∘\pi \text{ radians} = 180^{\circ}LEARN
radians=degrees×π180degrees=radians×180π\text{radians} = \text{degrees} \times \frac{\pi}{180} \qquad \text{degrees} = \text{radians} \times \frac{180}{\pi}LEARN
l=rθl = r\thetaBOOKLET
A=12r2θA = \frac{1}{2}r^{2}\thetaBOOKLET
segment area=12r2θ−12r2sin⁡θ=12r2(θ−sin⁡θ)\text{segment area} = \frac{1}{2}r^{2}\theta - \frac{1}{2}r^{2}\sin\theta = \frac{1}{2}r^{2}(\theta - \sin\theta)LEARN
π\pi radians =180∘= 180^{\circ}. Multiply by π180\frac{\pi}{180} to get radians, and by 180π\frac{180}{\pi} to get degrees.LEARN
Perimeter of a sector =2r+rθ= 2r + r\theta: two radii plus the arc.LEARN
A major sector has angle 2π−θ2\pi - \theta.LEARN
Segment == sector −- triangle =12r2(θ−sin⁡θ)= \frac{1}{2}r^{2}(\theta - \sin\theta).LEARN
Every formula here needs θ\theta in radians. On Paper 2, set radian mode first.LEARN

3.5Unit-circle trigonometry and exact values

P=(cos⁡θ, sin⁡θ)P = (\cos\theta,\ \sin\theta)LEARN
Signs: all three are positive in the first quadrant, only sin⁡\sin in the second, only tan⁡\tan in the third, only cos⁡\cos in the fourth.LEARN
sin⁡(π−θ)=sin⁡θ\sin(\pi - \theta) = \sin\theta and cos⁡(−θ)=cos⁡θ\cos(-\theta) = \cos\theta. Adding π\pi flips the signs of sin⁡\sin and cos⁡\cos, but not of tan⁡\tan.LEARN
tan⁡θ=sin⁡θcos⁡θ\tan\theta = \dfrac{\sin\theta}{\cos\theta}BOOKLET
The line through the origin at angle θ\theta to the positive xx-axis is y=xtan⁡θy = x\tan\theta.LEARN
θ0π6π4π3π20∘30∘45∘60∘90∘sin⁡θ01222321cos⁡θ13222120tan⁡θ03313undefined\begin{array}{c|ccccc} \theta & 0 & \frac{\pi}{6} & \frac{\pi}{4} & \frac{\pi}{3} & \frac{\pi}{2} \\ & 0^{\circ} & 30^{\circ} & 45^{\circ} & 60^{\circ} & 90^{\circ} \\ \hline \sin\theta & 0 & \frac{1}{2} & \frac{\sqrt{2}}{2} & \frac{\sqrt{3}}{2} & 1 \\ \cos\theta & 1 & \frac{\sqrt{3}}{2} & \frac{\sqrt{2}}{2} & \frac{1}{2} & 0 \\ \tan\theta & 0 & \frac{\sqrt{3}}{3} & 1 & \sqrt{3} & \text{undefined} \end{array}LEARN
Exact value of a multiple: the size comes from the reference angle in the table, the sign from the quadrant.LEARN
Ambiguous case: if sin⁡B=k<1\sin B = k < 1, test sin⁡−1k\sin^{-1}k and 180∘−sin⁡−1k180^{\circ} - \sin^{-1}k. Keep each angle only if the angle sum stays below 180∘180^{\circ}.LEARN

3.6Trigonometric identities

cos⁡2θ+sin⁡2θ=1\cos^{2}\theta + \sin^{2}\theta = 1BOOKLET
sin⁡2θ=1−cos⁡2θcos⁡2θ=1−sin⁡2θ\sin^{2}\theta = 1 - \cos^{2}\theta \qquad \cos^{2}\theta = 1 - \sin^{2}\thetaLEARN
sin⁡2θ=2sin⁡θcos⁡θ\sin 2\theta = 2\sin\theta\cos\thetaBOOKLET
cos⁡2θ=cos⁡2θ−sin⁡2θ=2cos⁡2θ−1=1−2sin⁡2θ\cos 2\theta = \cos^{2}\theta - \sin^{2}\theta = 2\cos^{2}\theta - 1 = 1 - 2\sin^{2}\thetaBOOKLET
sin⁡2θ=1−cos⁡2θ\sin^{2}\theta = 1 - \cos^{2}\theta and cos⁡2θ=1−sin⁡2θ\cos^{2}\theta = 1 - \sin^{2}\theta: use them to write an expression in one ratio.LEARN
Choose the cos⁡2θ\cos 2\theta form that fits: 1−2sin⁡2θ1 - 2\sin^{2}\theta for sine only, 2cos⁡2θ−12\cos^{2}\theta - 1 for cosine only.LEARN
Given one ratio, the Pythagorean identity gives the size of another, and the quadrant gives its sign.LEARN
To prove an identity, work from one side to the other. Never work on both sides at once.LEARN

3.7Circular functions, graphs and transformations

sin⁡x, cos⁡x: period 2π=360∘, amplitude 1, range −1≤y≤1\sin x,\ \cos x:\ \text{period } 2\pi = 360^{\circ},\ \text{amplitude } 1,\ \text{range } -1 \le y \le 1LEARN
tan⁡x: period π=180∘, no amplitude, asymptotes x=π2+kπ, k∈Z\tan x:\ \text{period } \pi = 180^{\circ},\ \text{no amplitude},\ \text{asymptotes } x = \frac{\pi}{2} + k\pi,\ k \in \mathbb{Z}LEARN
y=asin⁡(b(x+c))+d:amplitude ∣a∣period 2πb=360∘bprincipal axis y=dy = a\sin\big(b(x + c)\big) + d:\quad \text{amplitude } |a| \qquad \text{period } \frac{2\pi}{b} = \frac{360^{\circ}}{b} \qquad \text{principal axis } y = dLEARN
d=max⁡+min⁡2∣a∣=max⁡−min⁡2b=2πperiodd = \frac{\max + \min}{2} \qquad |a| = \frac{\max - \min}{2} \qquad b = \frac{2\pi}{\text{period}}LEARN
From sin⁡x\sin x to asin⁡(b(x+c))+da\sin(b(x + c)) + d: stretch by 1b\frac{1}{b} horizontally and by aa vertically, then translate cc to the left and dd up.LEARN
Factorise bb out of bx+kbx + k before you read the shift. Calculator regressions often give sin⁡(bx+k)\sin(bx + k).LEARN
cos⁡\cos starts at a maximum, −cos⁡-\cos at a minimum, and sin⁡\sin on the principal axis going up.LEARN

3.8Trigonometric equations

Q1: αQ2: π−αQ3: π+αQ4: 2π−α\text{Q1: } \alpha \qquad \text{Q2: } \pi - \alpha \qquad \text{Q3: } \pi + \alpha \qquad \text{Q4: } 2\pi - \alphaLEARN
tan⁡θ=sin⁡θcos⁡θ\tan\theta = \frac{\sin\theta}{\cos\theta}BOOKLET
cos⁡2θ+sin⁡2θ=1\cos^{2}\theta + \sin^{2}\theta = 1BOOKLET
sin⁡2θ=2sin⁡θcos⁡θ\sin 2\theta = 2\sin\theta\cos\thetaBOOKLET
cos⁡2θ=cos⁡2θ−sin⁡2θ=2cos⁡2θ−1=1−2sin⁡2θ\cos 2\theta = \cos^{2}\theta - \sin^{2}\theta = 2\cos^{2}\theta - 1 = 1 - 2\sin^{2}\thetaBOOKLET
"Solve" means every solution in the interval and none outside it. Sketch the graph first to count them.LEARN
If α\alpha is one solution: sin⁡x=k\sin x = k also has π−α\pi - \alpha, cos⁡x=k\cos x = k also has 2π−α2\pi - \alpha, and tan⁡x=k\tan x = k also has α+π\alpha + \pi. Then add or subtract whole periods.LEARN
For an angle such as 2x2x or x+40∘x + 40^{\circ}, change the interval for the whole angle first, solve, then convert back.LEARN
Treat asin⁡2x+bsin⁡x+c=0a\sin^{2}x + b\sin x + c = 0 as a quadratic in sin⁡x\sin x. Reject any sin⁡x\sin x or cos⁡x\cos x outside [−1,1][-1, 1].LEARN
Factorise. Dividing by sin⁡x\sin x or cos⁡x\cos x loses every solution where it is 00.LEARN
Match cos⁡2x\cos 2x to the equation: 1−2sin⁡2x1 - 2\sin^{2}x with sin⁡x\sin x terms, 2cos⁡2x−12\cos^{2}x - 1 with cos⁡x\cos x terms.BOOKLET

3.9 ◆Reciprocal and inverse trigonometric functions

sec⁡θ=1cos⁡θ\sec\theta = \frac{1}{\cos\theta}BOOKLET
cosec⁡θ=1sin⁡θ\operatorname{cosec}\theta = \frac{1}{\sin\theta}BOOKLET
cot⁡θ=1tan⁡θ=cos⁡θsin⁡θ\cot\theta = \frac{1}{\tan\theta} = \frac{\cos\theta}{\sin\theta}LEARN
1+tan⁡2θ=sec⁡2θ1 + \tan^{2}\theta = \sec^{2}\thetaBOOKLET
1+cot⁡2θ=cosec⁡2θ1 + \cot^{2}\theta = \operatorname{cosec}^{2}\thetaBOOKLET
functiondomainrangearcsin⁡x−1≤x≤1−π2≤y≤π2arccos⁡x−1≤x≤10≤y≤πarctan⁡xx∈R−π2<y<π2\begin{array}{lll} \text{function} & \text{domain} & \text{range} \\ \hline \arcsin x & -1 \le x \le 1 & -\frac{\pi}{2} \le y \le \frac{\pi}{2} \\ \arccos x & -1 \le x \le 1 & 0 \le y \le \pi \\ \arctan x & x \in \mathbb{R} & -\frac{\pi}{2} < y < \frac{\pi}{2} \end{array}LEARN
A reciprocal ratio has the sign of its parent ratio. After a square root, the quadrant decides between ++ and −-.LEARN
arcsin⁡(sin⁡θ)=θ\arcsin(\sin\theta) = \theta only when θ\theta is in the range of arcsin⁡\arcsin. Otherwise work out the inside first.LEARN

3.10 ◆Compound-angle identities

sin⁡(A±B)=sin⁡Acos⁡B±cos⁡Asin⁡B\sin(A \pm B) = \sin A\cos B \pm \cos A\sin BBOOKLET
cos⁡(A±B)=cos⁡Acos⁡B∓sin⁡Asin⁡B\cos(A \pm B) = \cos A\cos B \mp \sin A\sin BBOOKLET
tan⁡(A±B)=tan⁡A±tan⁡B1∓tan⁡Atan⁡B\tan(A \pm B) = \frac{\tan A \pm \tan B}{1 \mp \tan A\tan B}BOOKLET
tan⁡2θ=2tan⁡θ1−tan⁡2θ\tan 2\theta = \frac{2\tan\theta}{1 - \tan^{2}\theta}BOOKLET
Read the top signs together or the bottom signs together. Sine keeps the sign; cosine and the bottom of tangent swap it.LEARN
Put B=AB = A to derive sin⁡2θ\sin 2\theta, cos⁡2θ\cos 2\theta and tan⁡2θ\tan 2\theta. Use cos⁡2θ+sin⁡2θ=1\cos^{2}\theta + \sin^{2}\theta = 1 for the other two forms of cos⁡2θ\cos 2\theta.LEARN
For an exact value, split the angle into angles such as π6\frac{\pi}{6}, π4\frac{\pi}{4} and π3\frac{\pi}{3}. Rationalise if the question asks for a form.LEARN
In equations, factorise rather than divide by tan⁡x\tan x or cos⁡x\cos x, unless you have shown it can't be zero.LEARN

3.11 ◆Trigonometric-function relationships and symmetry

sin⁡(π−θ)=sin⁡θ,cos⁡(π−θ)=−cos⁡θ,tan⁡(π−θ)=−tan⁡θ\sin(\pi - \theta) = \sin\theta, \qquad \cos(\pi - \theta) = -\cos\theta, \qquad \tan(\pi - \theta) = -\tan\thetaLEARN
sin⁡(π2−θ)=cos⁡θ,cos⁡(π2−θ)=sin⁡θ\sin\left(\frac{\pi}{2} - \theta\right) = \cos\theta, \qquad \cos\left(\frac{\pi}{2} - \theta\right) = \sin\thetaLEARN
π\pi and 2π2\pi keep the function; π2\frac{\pi}{2} and 3π2\frac{3\pi}{2} swap sine and cosine. Take the sign from the quadrant the angle lands in when θ\theta is acute.LEARN
If f(a−x)=f(x)f(a - x) = f(x), the graph mirrors in x=a2x = \frac{a}{2}. If f(a−x)=−f(x)f(a - x) = -f(x), it has half-turn symmetry about (a2,0)\left(\frac{a}{2}, 0\right).LEARN
y=sin⁡xy = \sin x mirrors in x=π2+kπx = \frac{\pi}{2} + k\pi; y=cos⁡xy = \cos x mirrors in x=kπx = k\pi. Their half-turn centres are where they cross the xx-axis.LEARN
sin⁡A=sin⁡B\sin A = \sin B gives A=B+2kπA = B + 2k\pi or A=π−B+2kπA = \pi - B + 2k\pi. Turn a cosine into a sine with cos⁡x=sin⁡(π2−x)\cos x = \sin\left(\frac{\pi}{2} - x\right).LEARN

3.12 ◆Vectors in 2D and 3D

∣v∣=v12+v22+v32, where v=(v1v2v3)\lvert\boldsymbol{v}\rvert = \sqrt{v_{1}^{2} + v_{2}^{2} + v_{3}^{2}}, \text{ where } \boldsymbol{v} = \begin{pmatrix}v_{1}\\v_{2}\\v_{3}\end{pmatrix}BOOKLET
v=(v1v2v3)=v1i+v2j+v3k\boldsymbol{v} = \begin{pmatrix}v_{1}\\v_{2}\\v_{3}\end{pmatrix} = v_{1}\boldsymbol{i} + v_{2}\boldsymbol{j} + v_{3}\boldsymbol{k}. A missing base vector means a zero component.LEARN
AB→=b−a\overrightarrow{AB} = \boldsymbol{b} - \boldsymbol{a} (end minus start), and the distance AB=∣b−a∣AB = \lvert\boldsymbol{b} - \boldsymbol{a}\rvert.LEARN
Non-zero v\boldsymbol{v} and w\boldsymbol{w} are parallel when w=kv\boldsymbol{w} = k\boldsymbol{v}. A, B and C are collinear when AC→=kAB→\overrightarrow{AC} = k\overrightarrow{AB}.LEARN
Unit vector in the direction of v\boldsymbol{v}: v∣v∣\frac{\boldsymbol{v}}{\lvert\boldsymbol{v}\rvert}. Length LL in that direction: Lv∣v∣L\frac{\boldsymbol{v}}{\lvert\boldsymbol{v}\rvert}.LEARN
The midpoint of [AB] has position vector 12(a+b)\frac{1}{2}(\boldsymbol{a} + \boldsymbol{b}).LEARN
Vector proof: write every arrow in terms of two non-parallel vectors such as a\boldsymbol{a} and b\boldsymbol{b}. A scalar multiple means parallel; equal position vectors mean the same point.LEARN

3.13 ◆Scalar product and angles

v⋅w=v1w1+v2w2+v3w3, where v=(v1v2v3),  w=(w1w2w3)\boldsymbol{v} \cdot \boldsymbol{w} = v_{1}w_{1} + v_{2}w_{2} + v_{3}w_{3}, \text{ where } \boldsymbol{v} = \begin{pmatrix}v_{1}\\v_{2}\\v_{3}\end{pmatrix}, \; \boldsymbol{w} = \begin{pmatrix}w_{1}\\w_{2}\\w_{3}\end{pmatrix}BOOKLET
v⋅w=∣v∣∣w∣cos⁡θ, where θ is the angle between v and w\boldsymbol{v} \cdot \boldsymbol{w} = \lvert\boldsymbol{v}\rvert\lvert\boldsymbol{w}\rvert\cos\theta, \text{ where } \theta \text{ is the angle between } \boldsymbol{v} \text{ and } \boldsymbol{w}BOOKLET
cos⁡θ=v1w1+v2w2+v3w3∣v∣∣w∣\cos\theta = \frac{v_{1}w_{1} + v_{2}w_{2} + v_{3}w_{3}}{\lvert\boldsymbol{v}\rvert\lvert\boldsymbol{w}\rvert}BOOKLET
Expand scalar products like brackets: v⋅w=w⋅v\boldsymbol{v} \cdot \boldsymbol{w} = \boldsymbol{w} \cdot \boldsymbol{v}, and scalars move to the front. Also v⋅v=∣v∣2\boldsymbol{v} \cdot \boldsymbol{v} = \lvert\boldsymbol{v}\rvert^{2}.LEARN
A positive scalar product means an acute angle, zero means a right angle, and negative means an obtuse angle.LEARN
Non-zero vectors are perpendicular exactly when v⋅w=0\boldsymbol{v} \cdot \boldsymbol{w} = 0. Parallel vectors have ∣v⋅w∣=∣v∣∣w∣\lvert \boldsymbol{v} \cdot \boldsymbol{w} \rvert = \lvert\boldsymbol{v}\rvert\lvert\boldsymbol{w}\rvert.LEARN
For the angle at a corner of a triangle, use two vectors that both leave that corner.LEARN

3.14 ◆Vector equations of lines

r=a+λb\boldsymbol{r} = \boldsymbol{a} + \lambda\boldsymbol{b}BOOKLET
r=p+λ(q−p)\boldsymbol{r} = \boldsymbol{p} + \lambda(\boldsymbol{q} - \boldsymbol{p})LEARN
x=x0+λl,y=y0+λm,z=z0+λnx = x_{0} + \lambda l, \quad y = y_{0} + \lambda m, \quad z = z_{0} + \lambda nBOOKLET
x−x0l=y−y0m=z−z0n\dfrac{x - x_{0}}{l} = \dfrac{y - y_{0}}{m} = \dfrac{z - z_{0}}{n}BOOKLET
cos⁡θ=v1w1+v2w2+v3w3∣v∣∣w∣\cos\theta = \dfrac{v_{1}w_{1} + v_{2}w_{2} + v_{3}w_{3}}{\lvert\boldsymbol{v}\rvert\lvert\boldsymbol{w}\rvert}BOOKLET
r=a+tv\boldsymbol{r} = \boldsymbol{a} + t\boldsymbol{v}LEARN
A line needs a point and a direction: r=a+λb\boldsymbol{r} = \boldsymbol{a} + \lambda\boldsymbol{b}. Always start with r=\boldsymbol{r} =.BOOKLET
Through two points P and Q, use PQ→=q−p\overrightarrow{\mathrm{PQ}} = \boldsymbol{q} - \boldsymbol{p} as the direction, not a position vector.LEARN
In Cartesian form the denominators give the direction, but only once each numerator reads x−x0x - x_0, y−y0y - y_0 or z−z0z - z_0. If in doubt, set each part equal to λ\lambda.LEARN
Acute angle between two lines: cos⁡θ=∣b1⋅b2∣∣b1∣∣b2∣\cos\theta = \frac{\lvert \boldsymbol{b}_1 \cdot \boldsymbol{b}_2\rvert}{\lvert \boldsymbol{b}_1\rvert\lvert \boldsymbol{b}_2\rvert}, using direction vectors only. The lines are perpendicular when b1⋅b2=0\boldsymbol{b}_1 \cdot \boldsymbol{b}_2 = 0.LEARN
Motion: r=a+tv\boldsymbol{r} = \boldsymbol{a} + t\boldsymbol{v}, with a\boldsymbol{a} the starting position, v\boldsymbol{v} the velocity and ∣v∣\lvert\boldsymbol{v}\rvert the speed.LEARN

3.15 ◆Relationships between lines

a1+λb1=a2+μb2\boldsymbol{a}_{1} + \lambda\boldsymbol{b}_{1} = \boldsymbol{a}_{2} + \mu\boldsymbol{b}_{2}LEARN
Two lines are coincident, parallel, intersecting or skew. Skew lines are not parallel and never meet, so they exist only in 3D.LEARN
Same direction means b2=kb1\boldsymbol{b}_2 = k\boldsymbol{b}_1. Then test one point: on the other line means coincident, off it means parallel.LEARN
For a common point, use different parameters, solve two component equations and test the third. Put λ\lambda into L1L_1 for the point.LEARN
To show lines are skew, show both: the directions are not multiples, and the third equation fails.LEARN

3.16 ◆Vector product

v×w=(v2w3−v3w2v3w1−v1w3v1w2−v2w1), where v=(v1v2v3),  w=(w1w2w3)\boldsymbol{v} \times \boldsymbol{w} = \begin{pmatrix}v_{2}w_{3} - v_{3}w_{2}\\v_{3}w_{1} - v_{1}w_{3}\\v_{1}w_{2} - v_{2}w_{1}\end{pmatrix}, \text{ where } \boldsymbol{v} = \begin{pmatrix}v_{1}\\v_{2}\\v_{3}\end{pmatrix}, \; \boldsymbol{w} = \begin{pmatrix}w_{1}\\w_{2}\\w_{3}\end{pmatrix}BOOKLET
∣v×w∣=∣v∣∣w∣sin⁡θ, where θ is the angle between v and w\lvert \boldsymbol{v} \times \boldsymbol{w} \rvert = \lvert\boldsymbol{v}\rvert\lvert\boldsymbol{w}\rvert\sin\theta, \text{ where } \theta \text{ is the angle between } \boldsymbol{v} \text{ and } \boldsymbol{w}BOOKLET
A=∣v×w∣, where v and w form two adjacent sides of a parallelogramA = \lvert \boldsymbol{v} \times \boldsymbol{w} \rvert, \text{ where } \boldsymbol{v} \text{ and } \boldsymbol{w} \text{ form two adjacent sides of a parallelogram}BOOKLET
A=12∣v×w∣, where v and w form two sides of a triangle from the same vertexA = \frac{1}{2}\lvert \boldsymbol{v} \times \boldsymbol{w} \rvert, \text{ where } \boldsymbol{v} \text{ and } \boldsymbol{w} \text{ form two sides of a triangle from the same vertex}LEARN
v×w\boldsymbol{v} \times \boldsymbol{w} is perpendicular to both v\boldsymbol{v} and w\boldsymbol{w}. Its direction follows the right-hand screw rule. Check your answer with two scalar products of 00.LEARN
Order matters: w×v=−v×w\boldsymbol{w} \times \boldsymbol{v} = -\boldsymbol{v} \times \boldsymbol{w}. Brackets expand, scalars move to the front, and v×v=0\boldsymbol{v} \times \boldsymbol{v} = \boldsymbol{0}.LEARN
For non-zero vectors, v×w=0\boldsymbol{v} \times \boldsymbol{w} = \boldsymbol{0} means parallel, and v⋅w=0\boldsymbol{v} \cdot \boldsymbol{w} = 0 means perpendicular.LEARN

3.17 ◆Vector equations of planes

r=a+λb+μc\boldsymbol{r} = \boldsymbol{a} + \lambda\boldsymbol{b} + \mu\boldsymbol{c}BOOKLET
r=a+λAB→+μAC→\boldsymbol{r} = \boldsymbol{a} + \lambda\overrightarrow{\mathrm{AB}} + \mu\overrightarrow{\mathrm{AC}}LEARN
r⋅n=a⋅n\boldsymbol{r}\cdot\boldsymbol{n} = \boldsymbol{a}\cdot\boldsymbol{n}BOOKLET
ax+by+cz=dax + by + cz = dBOOKLET
Vector form: r=a+λb+μc\boldsymbol{r} = \boldsymbol{a} + \lambda\boldsymbol{b} + \mu\boldsymbol{c}, with b\boldsymbol{b} and c\boldsymbol{c} non-parallel directions in the plane. Always start with r=\boldsymbol{r} =.BOOKLET
Through three points A, B and C, use AB→\overrightarrow{\mathrm{AB}} and AC→\overrightarrow{\mathrm{AC}} as the directions, never a position vector.LEARN
Normal form: r⋅n=a⋅n\boldsymbol{r}\cdot\boldsymbol{n} = \boldsymbol{a}\cdot\boldsymbol{n}, where n\boldsymbol{n} is perpendicular to the plane. Work out a⋅n\boldsymbol{a}\cdot\boldsymbol{n} as a number.BOOKLET
Cartesian form: ax+by+cz=dax + by + cz = d. The coefficients give a normal (abc)\begin{pmatrix}a\\b\\c\end{pmatrix}, and dd comes from substituting a point.BOOKLET
Vector form to Cartesian: n=b×c\boldsymbol{n} = \boldsymbol{b}\times\boldsymbol{c}, then d=a⋅nd = \boldsymbol{a}\cdot\boldsymbol{n}. Check that n\boldsymbol{n} has scalar product 00 with b\boldsymbol{b} and c\boldsymbol{c}.LEARN
Cartesian to vector form: set two coordinates equal to λ\lambda and μ\mu, then solve for the third.LEARN
Parallel planes share a normal: the same left-hand side with a different dd.LEARN

3.18 ◆Intersections and angles of lines and planes

d=n1×n2\boldsymbol{d} = \boldsymbol{n}_{1} \times \boldsymbol{n}_{2}LEARN
cos⁡θ=v1w1+v2w2+v3w3∣v∣∣w∣\cos\theta = \dfrac{v_{1}w_{1} + v_{2}w_{2} + v_{3}w_{3}}{\lvert\boldsymbol{v}\rvert\lvert\boldsymbol{w}\rvert}BOOKLET
sin⁡θ=∣b⋅n∣∣b∣∣n∣\sin\theta = \dfrac{\lvert\boldsymbol{b}\cdot\boldsymbol{n}\rvert}{\lvert\boldsymbol{b}\rvert\lvert\boldsymbol{n}\rvert}LEARN
cos⁡θ=∣n1⋅n2∣∣n1∣∣n2∣\cos\theta = \dfrac{\lvert\boldsymbol{n}_{1}\cdot\boldsymbol{n}_{2}\rvert}{\lvert\boldsymbol{n}_{1}\rvert\lvert\boldsymbol{n}_{2}\rvert}LEARN
Line meets plane: substitute the general point into the plane and solve for λ\lambda. One value: one point. 0=00 = 0: the line lies in the plane. 0=q≠00 = q \neq 0: parallel, no meeting.LEARN
Two planes with non-parallel normals meet in a line with direction n1×n2\boldsymbol{n}_{1} \times \boldsymbol{n}_{2}. Find a point by setting to 00 a coordinate whose component in the direction is non-zero (usually zz).LEARN
Three planes: one solution is a single point; a one-parameter family is a common line (a sheaf); no solution means two parallel planes or a triangular prism.LEARN

Which method when

Right-angled triangle → Pythagoras, or sin⁡\sin, cos⁡\cos and tan⁡\tan (3.2)LEARN
No right angle → sine rule if a side and its opposite angle are known; cosine rule for two sides and the angle between them, or three sides (3.2)LEARN
Sine rule for an angle, with “two possible values” or an obtuse angle → ambiguous case: test θ\theta and 180∘−θ180^{\circ} - \theta (3.5)LEARN
Length or angle inside a 3D solid → find a right-angled triangle in it and draw that triangle on its own (3.1)LEARN
Arc, sector or segment → work in radians: l=rθl = r\theta, A=12r2θA = \frac{1}{2}r^{2}\theta, segment == sector −- triangle (3.4)LEARN
Exact trig value of a larger angle → reference angle for the size, quadrant for the sign (3.5)LEARN
One ratio given, another wanted → Pythagorean identity for the size, quadrant for the sign (3.6)LEARN
Trig equation → sketch to count the solutions. For 2x2x, change the interval first. A quadratic in sin⁡x\sin x → factorise (3.8)LEARN

◆Which method when

Angle between two vectors → cos⁡θ=v⋅w∣v∣∣w∣\cos\theta = \frac{\boldsymbol{v} \cdot \boldsymbol{w}}{\lvert\boldsymbol{v}\rvert\lvert\boldsymbol{w}\rvert}. Between two lines, use their direction vectors and give the acute angle (3.13, 3.14)LEARN
Vector perpendicular to two vectors, a normal to a plane, or an area → vector product (3.16, 3.17)LEARN
Do two lines meet? → equate them with different parameters, solve two of the equations, test the third (3.15)LEARN
Where a line meets a plane → put the line's general point into the plane's equation and solve for λ\lambda (3.18)LEARN
Follows the IB Maths AA guide (first assessment 2021). Not affiliated with the IB.