How much, how fast and how far? cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

How much, how fast and how far?

IB CHEMISTRY · HL
pastpaperprep.com/revision-notes

5.1Chemical equations and reacting quantities

Balance an equation with coefficients only, never by changing a formula. Add state symbols: (s), (l), (g), (aq).LEARN
Coefficients give the mole ratio of the substances, not their mass ratio.LEARN
nB=nA×ban_\text{B} = n_\text{A} \times \frac{b}{a}LEARN
Method: change what you know into moles, use the mole ratio, then change moles into what you want.LEARN
Gases at the same temperature and pressure react in the volume ratio of their coefficients.LEARN
n=VVm,Vm=22.7 dm3 mol−1 at STPn = \frac{V}{V_\text{m}}, \quad V_\text{m} = \pu{22.7 dm3 mol-1} \text{ at STP}LEARN
For solutions, n=CVn = CV with VV in dm3\pu{dm3}: divide cm3\pu{cm3} by 1000.LEARN

5.2Limiting reactants, yield and atom economy

To find the limiting reactant, divide each reactant's amount in mol by its coefficient. The smallest value is limiting.LEARN
The theoretical yield is calculated from the limiting reactant, never from a reactant in excess.LEARN
percentage yield=experimental yieldtheoretical yield×100\text{percentage yield} = \frac{\text{experimental yield}}{\text{theoretical yield}} \times 100LEARN
Yields are lowered by incomplete reaction, side reactions and losses of product. A wet or impure product makes the yield look too high.LEARN
% atom economy=molar mass of desired productmolar mass of all reactants×100\%\ \text{atom economy} = \frac{\text{molar mass of desired product}}{\text{molar mass of all reactants}} \times 100BOOKLET
The lower the atom economy, the more waste. A reaction with one product, such as an addition reaction, has 100%100\% atom economy. Atom economy is not the same as yield.LEARN

5.3Rates of reaction and collision theory

rate=Δ[product]Δtorrate=−Δ[reactant]Δt\text{rate} = \frac{\Delta[\text{product}]}{\Delta t} \quad \text{or} \quad \text{rate} = -\frac{\Delta[\text{reactant}]}{\Delta t}LEARN
Rate is always positive, usually in mol dm−3 s−1\pu{mol dm-3 s-1}; from gas volume or mass it is in cm3 s−1\pu{cm3 s-1} or g s−1\pu{g s-1}.LEARN
The rate at a given time is the gradient of the tangent there; the tangent at t=0t = 0 gives the initial rate.LEARN
Average kinetic energy is proportional to the temperature in kelvin, not in °C.LEARN
A successful collision needs energy ≥Ea\geq E_\text{a} and the proper orientation.LEARN
Higher concentration, gas pressure or surface area: more frequent collisions. Higher temperature: mainly a greater proportion of collisions with energy ≥Ea\geq E_\text{a}. Catalyst: lower EaE_\text{a}.LEARN

5.4Activation energy and catalysts

EaE_\text{a}: the minimum energy colliding particles need to react, measured from the reactants up to the peak.LEARN
Ea(reverse)=Ea(forward)−ΔHE_\text{a}(\text{reverse}) = E_\text{a}(\text{forward}) - \Delta HLEARN
Maxwell–Boltzmann curve: fraction of particles against kinetic energy; starts at the origin; tail never touches the axis; the area stands for all the particles.LEARN
Higher temperature: lower peak further right, same area, more particles with E≥EaE \ge E_\text{a}, more successful collisions per unit time.LEARN
A catalyst gives an alternative pathway with lower EaE_\text{a} and is not used up. Enzymes are biological catalysts.LEARN
A catalyst doesn't change ΔH\Delta H, the Maxwell–Boltzmann curve, the equilibrium position or KK.LEARN

5.5 ◆Reaction mechanisms and the rate-determining step

A mechanism's elementary steps must add up to the overall equation. Intermediates are made then used up; catalysts are used then regenerated.LEARN
The slowest step is rate-determining. The rate equation holds its reactants, each to the power of its coefficient; swap an intermediate for the reactants of the fast equilibrium that makes it. Species reacting after it are zero order.LEARN
A mechanism that fits the stoichiometry and the rate equation is consistent, not proven.LEARN
Energy profile: one hump per step; transition state at each peak, intermediate in each dip; the rate-determining step has the largest activation energy.LEARN
Molecularity (elementary steps only): unimolecular 1, bimolecular 2, termolecular 3 (rare).LEARN

5.6 ◆Rate equations and orders of reaction

rate=k[A]m[B]n\text{rate} = k[\text{A}]^{m}[\text{B}]^{n}LEARN
Orders (mm, nn) come only from experiment, never from the balanced equation. The overall order is m+nm + n.LEARN
Doubling a concentration multiplies the rate by 1 at zero order, 2 at first order and 4 at second order.LEARN
Reactants in the rate-determining step appear in the rate equation; an intermediate there is replaced by the reactants that form it. A reactant that joins in after it is zero order.LEARN
[A][\text{A}] against time: zero order is a straight line; first order is a curve with a constant half-life. Rate against [A][\text{A}]: zero order is horizontal, first order a straight line through the origin, second order an upward curve through the origin.LEARN
units of k=mol dm−3 s−1(mol dm−3)overall order\text{units of } k = \frac{\pu{mol dm-3 s-1}}{(\pu{mol dm-3})^{\text{overall order}}}LEARN
Units of kk: order 0 mol dm−3 s−1\pu{mol dm-3 s-1}, order 1 s−1\pu{s-1}, order 2 mol−1 dm3 s−1\pu{mol-1 dm3 s-1}, order 3 mol−2 dm6 s−1\pu{mol-2 dm6 s-1}.LEARN
kk changes with temperature (and with a catalyst), not with concentration.LEARN

5.7 ◆The Arrhenius equation

k=Ae−EaRTk = A\mathrm{e}^{-\frac{E_\text{a}}{RT}}BOOKLET
ln⁡k=−EaRT+ln⁡A\ln k = -\frac{E_\text{a}}{RT} + \ln ABOOKLET
kk increases with temperature, more and more steeply over laboratory temperatures. EaE_\text{a} and AA are treated as constant.LEARN
Plot ln⁡k\ln k against 1/T1/T: gradient =−Ea/R= -E_\text{a}/R, so Ea=−R×gradientE_\text{a} = -R \times \text{gradient}; intercept =ln⁡A= \ln A.LEARN
AA: frequency of collisions with the proper orientation, same units as kk. e−Ea/RT\mathrm{e}^{-E_\text{a}/RT}: fraction of collisions with enough energy.LEARN
Use EaE_\text{a} in J mol−1\pu{J mol-1}, TT in K and R=8.31 J K−1 mol−1R = \pu{8.31 J K-1 mol-1}.LEARN

5.8Dynamic equilibrium and the equilibrium constant

K=[C]c [D]d[A]a [B]bK = \frac{[\ce{C}]^{c}\,[\ce{D}]^{d}}{[\ce{A}]^{a}\,[\ce{B}]^{b}}LEARN
Dynamic equilibrium needs a closed system. Forward and backward rates are equal, so concentrations stay constant (but usually not equal).LEARN
In KK, square brackets are equilibrium concentrations in mol dm−3\pu{mol dm-3}. Every species of a homogeneous reaction appears, except water as the solvent; KK has no units in IB Chemistry.LEARN
K≫1K \gg 1: almost complete. K>1K > 1: products favoured. K=1K = 1: neither favoured. K<1K < 1: reactants favoured. K≪1K \ll 1: hardly reacts.LEARN
Reverse reaction at the same temperature: Kreverse=1KforwardK_{\text{reverse}} = \frac{1}{K_{\text{forward}}}.LEARN
For a given equation, only temperature changes KK. Concentration, pressure and catalysts do not.LEARN

5.9Le Châtelier's principle

Le Châtelier's principle: a system at equilibrium shifts its position to partly oppose a change in conditions.LEARN
Add a reactant or remove a product: shifts right. Add a product or remove a reactant: shifts left (gases and dissolved species only). KK unchanged.LEARN
Higher pressure (smaller volume): towards fewer moles of gas (count gases only). Equal moles of gas: no effect. KK unchanged.LEARN
Higher temperature favours the endothermic direction. ΔH>0\Delta H > 0: KK rises with temperature. ΔH<0\Delta H < 0: KK falls.LEARN
A catalyst speeds up both reactions equally: equilibrium comes sooner, but the position and KK don't change.LEARN

5.10 ◆The reaction quotient and equilibrium calculations

QQ is the equilibrium expression with the concentrations at that moment. Q<KQ < K: net forward. Q>KQ > K: net backward. Q=KQ = K: at equilibrium.LEARN
ICE table: initial amounts, changes in the mole ratio of the equation, equilibrium amounts. Divide by the volume before substituting into KK.LEARN
When KK is very small and the mixture starts as reactants only, [reactant]eqm≈[reactant]initial[\text{reactant}]_{\text{eqm}} \approx [\text{reactant}]_{\text{initial}}.LEARN
ΔG⊖=−RTln⁡K\Delta G^\ominus = -RT\ln KBOOKLET
ΔG⊖<0\Delta G^\ominus < 0: K>1K > 1. ΔG⊖>0\Delta G^\ominus > 0: K<1K < 1. For any mixture, ΔG=RTln⁡QK\Delta G = RT\ln\frac{Q}{K}, so ΔG<0\Delta G < 0 exactly when Q<KQ < K.LEARN

Which method when

Mass, gas volume or solution of one substance given, another asked for → change to moles, multiply by the mole ratio ba\frac{b}{a}, then change back; gases at the same temperature and pressure react in the volume ratio of their coefficients (5.1)LEARN
Amounts of two reactants given → divide each amount in mol by its coefficient; the smallest is limiting and sets the theoretical yield (5.2)LEARN
Percentage yield → experimental over theoretical yield of the same product, × 100; atom economy → molar mass of the desired product over the total molar mass of all reactants, coefficients included, × 100 (5.2)LEARN
Rate at a given time from a concentration–time curve → gradient of the tangent at that time, given as positive; the tangent at t=0t = 0 gives the initial rate (5.3)LEARN
Explain how a change affects the rate → what happens to the particles, then the frequency of successful collisions; for temperature or a catalyst, a greater proportion of collisions with energy ≥Ea\geq E_\text{a} on the Maxwell–Boltzmann curve (5.3, 5.4)LEARN
Activation energy of the reverse reaction → Ea(reverse)=Ea(forward)−ΔHE_\text{a}(\text{reverse}) = E_\text{a}(\text{forward}) - \Delta H, with ΔH\Delta H for the forward reaction (5.4)LEARN
Effect of a change on an equilibrium → Le Châtelier: a concentration change, or a pressure change from a smaller volume (towards fewer moles of gas), moves the position but not KK; a temperature rise favours the endothermic direction and changes KK; a catalyst changes neither (5.8, 5.9)LEARN

◆Which method when

Evaluate a proposed mechanism → the steps must add up to the overall equation, and the rate equation predicted from the slow step (intermediates swapped for the reactants that form them) must match the experimental one (5.5)LEARN
Initial-rate table → pick two runs where only one concentration changes; rate factor = (concentration factor)order^{\text{order}}; units of kk from the overall order (5.6)LEARN
kk at several temperatures, EaE_\text{a} asked → plot ln⁡k\ln k against 1T\frac{1}{T} (TT in K); Ea=−R×gradientE_\text{a} = -R \times \text{gradient} in J mol−1\pu{J mol-1}, intercept =ln⁡A= \ln A (5.7)LEARN
Which way will a mixture react? → calculate QQ and compare with KK: Q<KQ < K net forward, Q>KQ > K net backward; from starting amounts, use an ICE table with changes in the mole ratio and divide by the volume before substituting (5.10)LEARN
KK from ΔG⊖\Delta G^\ominus, or the reverse → ΔG⊖=−RTln⁡K\Delta G^\ominus = -RT\ln K with ΔG⊖\Delta G^\ominus in J and TT in K; ΔG⊖<0\Delta G^\ominus < 0 means K>1K > 1 (5.10)LEARN
Follows the IB Chemistry guide (first assessment 2025). Not affiliated with the IB.