Particle model
In a minute
The says everything is made of tiny particles that are always moving. How the particles are arranged, how far apart they are and how fast they move explains , and , and . , the random jiggling of smoke specks in air, shows that the particles are really there.
You'll be able to
- Describe how the particles of a solid, a liquid and a gas are arranged, how far apart they are and how they move, and draw a simple particle diagram of each.
- Link the temperature of a substance to how fast its particles move, and say what happens at .
- Explain the of a gas, and what makes it change, using particles hitting a surface.
- Describe Brownian motion, explain it with random collisions, and say why it is evidence for the particle model.
- Explain the properties of each state using the forces between particles, how far apart they are and how they move.
- Describe gas pressure as the force per unit area from collisions, and explain how light, fast can move much heavier microscopic particles.
Before you start2 quick questions on what this builds on
Revise first: 1.7.1 Energy, 1.8 Pressure and 2.1.1 States of matter
Particles in solids, liquids and gases
In 2.1.1 you learned how solids, liquids and gases behave. The explains why. It says all matter is made of tiny particles that are always moving.
Depending on the substance, the particles are , or . They are far too small to see, even with a microscope. A substance has the same particles in every state. What changes is how they are arranged, how far apart they are and how they move.
In a solid, the particles are close together, touching their neighbours, in a regular pattern. Each one stays in place and can only vibrate about a fixed position.
In a liquid, the particles are still close together, almost touching, but in an irregular arrangement. They are not fixed in place: they move around each other. That is why a liquid can flow.
Gas particles are far apart, with lots of empty space between them, in a random arrangement. They move fast in all directions, in straight lines between collisions with each other and with the walls.
Try it first, then reveal one step at a time.
- Make one point each for arrangement, separation and motion, comparing the solid with the liquid.
- In the solid, the particles are in a regular pattern; in the liquid, they are in an irregular arrangement. In both states the particles are close together, so their separation hardly changes. In the solid, each particle can only vibrate about a fixed position; in the liquid, the particles move around each other.
The properties of each state depend on the forces between the particles, how far apart they are and how they move. The particles can be atoms, molecules or ions; in a metal, free electrons also move between the ions.
In a solid, strong forces hold the particles close together in fixed positions, so a solid keeps its shape and is very hard to compress. In a liquid, the forces still keep the particles close, so the volume is fixed. But the particles can move past each other, so a liquid flows.
In a gas, the particles are so far apart that the forces between them are very weak. Nothing holds them together, so they spread out to fill any container, and the big gaps let a gas be compressed easily.
Temperature, absolute zero and gas pressure
The particles of a substance don't all move at the same speed: some are faster, some slower. The tells you about their average. The higher the temperature, the faster the particles move on average, and the greater their average .
Heating a substance increases its . If it does not change state, its particles speed up and its temperature rises. In a solid, "faster" means the particles vibrate more strongly about their fixed positions. Cooling slows the particles down.
Keep cooling a substance and its particles keep slowing down. At about they have the least kinetic energy they can possibly have, so nothing can be colder. This lowest possible temperature is called . It is on the kelvin scale, which you will use in 2.1.3.
Now picture a gas in a closed container. Its particles move fast in random directions and keep hitting the walls. Each hit pushes on the wall. Huge numbers of hits every second give a steady push on every part of the wall: this is the .
So the pressure rises if the particles hit the walls more often, or hit them harder. For a closed container that cannot change size, there are two ways to do this:
1. Heat the gas. Its particles move faster, so they hit the walls more often and harder.
2. Add more gas, as when you pump up a tyre. At the same temperature, more particles hit each part of the wall every second. (Changing the volume is in 2.1.3.)
Try it first, then reveal one step at a time.
- Say what changes (the number of particles) and what doesn't (their average speed). Then link this to the hits on the inside of the ball, then to the pressure.
- There are more air particles in the same space. The temperature is the same, so the particles move at the same average speed. More particles hit each part of the inside of the ball every second. So the total force on the inside of the ball is greater, and the pressure increases.
More precisely, each particle exerts a small force on the wall as it bounces off. The pressure is the total force of all the collisions on each unit area of the wall: (1.8). Faster particles hit more often and each hit gives a bigger force, so the force on each square metre rises.
Try it first, then reveal one step at a time.
- Pressure is force per unit area: .
- Substitute: .
- The data have 2 significant figures, so write the answer to 2 significant figures in standard form.
Brownian motion: evidence for moving particles
You can't see the particles of a gas or a liquid, but you can see what they do. Shine a bright light from the side into a small glass cell of smoky air, and look through a microscope. The smoke shows up as bright specks that jiggle about at random and never stop.
Pollen grains floating in water do the same. This random movement of tiny visible particles in a liquid or gas is called . The visible bits are microscopic particles: far bigger than molecules, but still too small to see without a microscope.
Why do they move? Air is made of tiny molecules moving fast in random directions. They strike each smoke particle from every side. At any moment the hits on one side don't balance the hits on the other, so the smoke particle is pushed one way. A moment later the push is in a different direction.
This is evidence for the kinetic particle model. Nothing else is pushing the specks, so the air or water must be made of particles too small to see, moving fast and at random.
Try it first, then reveal one step at a time.
- Describe the water molecules first (size, speed, direction), then their collisions with a fat droplet, then the result.
- The water molecules are very small and move fast in random directions. They collide with each fat droplet from all sides. At any instant, the collisions on one side do not balance those on the other side. So the droplet is pushed in a random direction, and this direction keeps changing.
A smoke particle is many times heavier than an air molecule, so one hit barely moves it. But the air molecules are light and very fast, and huge numbers of them hit it every second. Their uneven hits are enough to move it.
Use the words carefully. The particles of the liquid or gas are molecules (or atoms, in a gas such as argon). Smoke particles and pollen grains are microscopic particles, each made of a huge number of atoms. Never call them molecules, and never say you can see the molecules.
Try it first, then reveal one step at a time.
- Compare the masses and speeds first. Then explain why the hits are uneven, and what that does to a smoke particle.
- The air molecules are much lighter than the smoke particles, but they move very fast. Huge numbers of them hit each smoke particle every second, from all directions. At any instant more molecules hit one side than the other, so there is an unbalanced force on the microscopic particle. This moves the smoke particle a short way in a random direction. The direction keeps changing, because the collisions are random.
Common mistakes
- Describing liquid particles as in a regular pattern or fixed positions. That is a solid; liquid particles are close together but move around each other.
- Saying solid particles don't move. They can't move around, but they vibrate about fixed positions.
- Saying particles get bigger when heated. They stay the same size; they just move faster.
- Explaining gas pressure with particles hitting each other. Pressure comes from particles hitting the walls.
- Calling the smoke specks in Brownian motion molecules, or saying they hit each other. They are microscopic particles pushed by uneven hits from invisible molecules.
Exam tips
- "Describe" the particles of a state: one point each for arrangement, separation and motion. In a comparison, mention both states in every point.
- "Explain" a pressure change in linked steps: the particles' speed or number, how often and how hard they hit the walls, then the pressure.
- "Explain" Brownian motion: small, fast, randomly moving molecules hit the visible particle unevenly from all sides, so it moves in a random, changing direction.
Key takeaways
Practise this
47 past-paper questions on Particle model in the 0625 Extended bank, each with a mark scheme and a worked explanation.