2.3.1 · CorePaper 1Paper 2Paper 3Paper 4

Conduction

In a minute

moves thermal energy through a material while the material itself stays put. Metals are good ; wood, plastic and air are . You need to describe experiments that show the difference, and Extended students explain it with particles and .

You'll be able to

  • Say what conduction is, and name good thermal conductors and thermal insulators.
  • Describe experiments that compare how well materials conduct, and read their results fairly.
  • Know that many conduct better than insulators but less well than metals.
  • Explain conduction in solids by , and in metals also by moving .
  • Explain, in terms of particles, why gases and most liquids conduct badly.
Before you start2 quick questions on what this builds on
Check yourself
How do the particles in a move?
Check yourself
One end of an iron bar is warmed. What happens to the particles at that end?

Revise first: 2.1.1 States of matter and 2.1.2 Particle model

Good and bad thermal conductors

Stir hot soup with a metal spoon and the handle soon gets hot. A wooden spoon's handle stays cool. Thermal energy travels along the metal much faster than along the wood.

Conduction is the main way energy passes through a . A material that lets energy through quickly is a good . A material that lets it through only slowly is a bad conductor, called a .

Metals are the good conductors. Some are better than others: copper, aluminium and silver conduct much better than steel. Metals conduct so well because they contain that carry energy quickly through them.

Wood, plastic, rubber, wool and polystyrene are thermal insulators, and glass is a poor conductor too. Liquids such as water conduct badly too, and air is one of the best insulators of all. Many insulators, such as wool, feathers and foam, work by trapping air.

Extended only

Not every solid is clearly one or the other. Brick, concrete, stone and glass conduct much better than true insulators such as polystyrene or wool, but far less well than metals. Glass is often called a poor conductor because it is poor next to a metal.

Worked exampleA soldering iron gets very hot at its tip. The tip is made of copper and the handle is made of thick plastic. Explain why each material is chosen.

Try it first, then reveal one step at a time.

  1. Ask what each part needs to do with thermal energy: pass it on quickly, or hold it back.
Worked exampleOn a frosty morning, a park bench has a wooden seat and steel armrests. Both have been outside all night and are at the same temperature. Explain why the armrests feel colder to touch than the seat.

Try it first, then reveal one step at a time.

  1. Both parts are at the same temperature, so the difference must be how fast energy leaves your hand.
Check yourself
Four spoons have the same size and shape. Which one gets hot along its whole length fastest when it stands in hot tea?
Extended only
Check yourself
Which material conducts thermal energy better than polystyrene but less well than copper?

Experiments that compare conductors

To compare materials, heat one end of equal rods in the same way and see how quickly energy reaches the other end. The only thing that changes is the material.

Four equal rods of copper, aluminium, steel and glass stand in one beaker of hot water. A bead is stuck near the top of each rod with wax, all at the same height. Time how long each bead takes to fall off: the shortest time means the best conductor copper aluminium steel glass bead stuck on with wax, same height on every rod time how long each bead takes to fall off shortest time means the best conductor hot water
Equal rods, the same hot water, beads stuck with wax at the same height.

1. Stick a small bead to each rod with the same amount of wax, at the same height.

2. Stand all the rods in the same beaker of hot water at the same moment, and start a stopwatch.

3. Record the time each bead falls. The wax melts when energy has been conducted up to it, so the shortest time means the best conductor.

A second experiment shows that water is a bad conductor. Weigh down some ice at the bottom of a test tube of cold water with metal gauze. Heat the top of the tube with a flame until the water there boils. The ice at the bottom stays frozen for minutes.

A slanted test tube full of water. Ice is held down at the bottom by metal gauze. A flame heats the tube near the top, where the water boils. The ice at the bottom has still not melted water boils here flame heats the top ice held down by metal gauze: still not melted
The water at the top boils while the ice at the bottom stays frozen.

Heating at the top matters. Warm water is less dense than cold water, so it stays at the top and cannot carry energy down to the ice (2.3.2). Energy can only reach the ice by conduction through the water, and that is very slow.

Worked exampleA student has three rods of the same size, made of brass, copper and glass. Describe an experiment to find out which material is the best thermal conductor.

Try it first, then reveal one step at a time.

  1. A Paper 6 plan needs: what you set up, what you keep the same, what you measure and how you decide.
Worked exampleIn a bead-and-wax test with equal rods, the beads fell after these times: aluminium 52 s52\ \text{s}, steel 190 s190\ \text{s}, copper 34 s34\ \text{s}. The bead on a plastic rod had not fallen after 10 min10\ \text{min}. Put the materials in order from best to worst conductor, and explain your order.

Try it first, then reveal one step at a time.

  1. A short time means energy reached the wax quickly, so the material is a better conductor.
Check yourself
A student tests rods of different metals by timing beads stuck on with wax. Which change would make the comparison unfair?
Check yourself
In the ice-in-a-test-tube experiment, the water at the top boils but the ice at the bottom does not melt. What does this show?

Conduction in terms of particles Extended only

In every solid, the atoms or molecules are held in fixed positions in a structure called a lattice. Heat one end and the particles there vibrate more strongly. They push on their neighbours, which then vibrate more too, and so on along the solid. These are .

Lattice vibrations are the only way a solid with no free electrons, such as glass or wood, conducts. Passing energy from neighbour to neighbour like this is slow.

A metal is a lattice of positive ions with (delocalised electrons) moving between them. At the hot end the free electrons gain kinetic energy. They move quickly through the metal and collide with ions further along, giving them energy.

A metal bar drawn as rows of positive ions with free electrons between them. The left end is hot: the ions there vibrate strongly, and the vibrations get smaller towards the cool right end. Arrows show free electrons moving from the hot end towards the cool end, carrying energy + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + hot end cool end ions vibrate about fixed positions and pass the vibrations on to their neighbours free electrons move through the metal, taking energy towards the cool end +ion freeelectron
In a metal, energy travels by lattice vibrations and by fast-moving free electrons.

So a metal conducts in two ways at once: lattice vibrations and moving free electrons. The electrons carry energy much faster, which is why metals are the best conductors. The ions stay in place; only the electrons move through the metal.

Worked exampleOne end of an aluminium rod is held in a flame. Explain, in terms of particles, how thermal energy reaches the other end.

Try it first, then reveal one step at a time.

  1. Aluminium is a metal, so give both ways: lattice vibrations and free electrons.
Check yourself
A copper wire is warmed at one end. Which statement about the energy reaching the other end is correct?

In a gas, the particles are far apart. They collide with each other far less often than particles in a solid, so energy is passed on very slowly. Gases have no free electrons either, which makes them very bad conductors.

In most liquids, the particles are close together but not held in a lattice, and there are no free electrons. Energy passes from particle to particle much less well than in a solid. Liquid metals such as mercury are the exception: their free electrons make them good conductors.

Worked exampleA double-glazed window has a thin layer of air sealed between two panes of glass. Explain, in terms of particles, why the air layer reduces the energy conducted through the window.

Try it first, then reveal one step at a time.

  1. Compare the particles in air with those in a solid, and say why that slows conduction.
Check yourself
Why is a gas a much worse thermal conductor than a solid?

Common mistakes

  • Picking any metal as the best conductor. Compare them: copper and aluminium conduct much better than steel.
  • Reading a longer time to melt the wax as better conduction. A longer time means a worse conductor.
  • Changing more than the material, such as using a longer rod or more wax on one rod. Keep everything else the same so the test is fair.
  • Saying a metal feels cold because it is colder or lets cold in. At the same temperature, it just conducts energy away from your hand faster.

Exam tips

  • "Describe an experiment": say what you set up, what you keep the same, what you measure and how the result shows the better conductor.
  • "Explain" conduction in a metal (Extended): name both ways, lattice vibrations passed to neighbouring ions and free electrons that move through the metal and collide with ions.

Key takeaways

Learn thisConduction transfers thermal energy through a material from hotter to colder parts, without the material moving.
Learn thisMetals are good thermal conductors (copper better than steel). Wood, plastic, wool and air are thermal insulators; water and most other liquids are poor conductors too.
Learn thisTo compare conductors, use rods of the same size, heated the same way, with the same wax at the same distance. The shortest time for the wax to melt means the best conductor.
Learn thisMany solids, such as brick, concrete and glass, conduct better than insulators but much less well than metals.
Learn thisAll solids conduct by lattice vibrations passed from particle to neighbour. Metals also have free electrons that move through the metal and carry energy quickly, so metals conduct best.
Learn thisGases conduct badly: their particles are far apart and collide less often. Most liquids conduct badly: no lattice and no free electrons (liquid metals are the exception).

Practise this

42 past-paper questions on Conduction in the 0625 Extended bank, each with a mark scheme and a worked explanation.

Practise Conduction →