IB Physics HL · Topic practice

Mechanics and motion past paper questions

Connect kinematics and force models to graphs and free-body reasoning. Check sign conventions, units and whether the result matches the stated motion.

Appears inPaper 1 299Paper 2 73Paper 3 25

Sort questions

You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.

Unlock from $6/mo
24 free questions

2020 NovemberPaper 1Question 2Component P1TZ01 mark
Mechanics and motionForces and dynamics
Loading original question

2. An object of mass 8.0 kg is falling vertically through the air. The drag force acting on the object is 60 N. What is the best estimate of the acceleration of the object? A. Zero B. 2.5 m s–2 C. 7.5 m s–2 D. 10 m s–2

2020 NovemberPaper 1Question 4Component P1TZ01 mark
Mechanics and motionWork, energy and power
Loading original question

4. An object of mass 1 kg is thrown downwards from a height of 20 m. The initial speed of the object is 6 m s–1. The object hits the ground at a speed of 20 m s–1. Assume g = 10 m s–2. What is the best estimate of the energy transferred from the object to the air as it falls? A. 6 J B. 18 J C. 182 J D. 200 J

2020 NovemberPaper 1Question 5Component P1TZ01 mark
Mechanics and motionWork, energy and power
Loading original question

5. A car is driven from rest along a straight horizontal road. The car engine exerts a constant driving force. Friction and air resistance are negligible. How does the power developed by the engine change with the distance travelled? A. Power does not change. B. Power decreases linearly. C. Power increases linearly. D. Power increases non-linearly.

2020 NovemberPaper 1Question 6Component P1TZ01 mark
Mechanics and motionMomentum, impulse and collisions
Loading original question

6. An object of mass 2m moving at velocity 3v collides with a stationary object of mass 4m. The objects stick together after the collision. What is the final speed and the change in total kinetic energy immediately after the collision? Final speed Change in total kinetic energy A. v 3 mv 2 B. v 6 mv 2 C. 2v 3 mv 2 D. 2v 6 mv 2

2020 NovemberPaper 1Question 20Component P1TZ01 mark
Mechanics and motionCircular motion and gravitation
Loading original question

20. Mass M is attached to one end of a string. The string is passed through a hollow tube and mass m is attached to the other end. Friction between the tube and string is negligible. r m M Mass m travels at constant speed v in a horizontal circle of radius r. What is mass M? A. mv r 2 B. mv 2rg C. mgv r 2 D. mv gr 2

2020 NovemberPaper 1Question 30Component P1TZ01 mark
Mechanics and motionCircular motion and gravitation
Loading original question

30. Two satellites W and X have the same mass. They have circular orbits around the same planet. W is closer to the surface than X. What quantity is smaller for W than for X? A. Gravitational force from the planet B. Angular velocity C. Orbital speed D. Orbital period

2020 NovemberPaper 1Question 31Component P1TZ01 mark
Mechanics and motionCircular motion and gravitation
Loading original question

Turn over 31. P and S are two points on a gravitational equipotential surface around a planet. Q and R are two points on a different gravitational equipotential surface at a greater distance from the planet. Q R S P The greatest work done by the gravitational force is when moving a mass from A. P to S. B. Q to R. C. R to P. D. S to R.

2020 NovemberPaper 2Question 1Component P2TZ010 marks
Mechanics and motionForces and dynamicsWork, energy and powerMomentum, impulse and collisions
Loading original question

1. A company delivers packages to customers using a small unmanned aircraft. Rotating horizontal blades exert a force on the surrounding air. The air above the aircraft is initially stationary. aircraft package ground The air is propelled vertically downwards with speed v. The aircraft hovers motionless above the ground. A package is suspended from the aircraft on a string. The mass of the aircraft is 0.95 kg and the combined mass of the package and string is 0.45 kg. The mass of air pushed downwards by the blades in one second is 1.7 kg. (a) (i) State the value of the resultant force on the aircraft when hovering. [1] (ii) Outline, by reference to Newton’s third law, how the upward lift force on the aircraft is achieved. [2] (iii) Determine ν. State your answer to an appropriate number of significant figures. [3] (This question continues on the following page) Turn over (Question 1 continued) (iv) Calculate the power transferred to the air by the aircraft. [2] (b) The package and string are now released and fall to the ground. The lift force on the aircraft remains unchanged. Calculate the initial acceleration of the aircraft. [2]

2020 NovemberPaper 2Question 2Component P2TZ07 marks
Mechanics and motionCircular motion and gravitationForces and dynamics
Loading original question

2. The Rotor is an amusement park ride that can be modelled as a vertical cylinder of inner radius R rotating about its axis. When the cylinder rotates sufficiently fast, the floor drops out and the passengers stay motionless against the inner surface of the cylinder. The diagram shows a person taking the Rotor ride. The floor of the Rotor has been lowered away from the person. axis of rotation R (a) Draw and label the free-body diagram for the person. [2] (This question continues on the following page) Turn over (Question 2 continued) (b) The person must not slide down the wall. Show that the minimum angular velocity ω of the cylinder for this situation is g R where µ is the coefficient of static friction between the person and the cylinder. [2] (c) The coefficient of static friction between the person and the cylinder is 0.40. The radius of the cylinder is 3.5 m. The cylinder makes 28 revolutions per minute. Deduce whether the person will slide down the inner surface of the cylinder. [3]

2020 NovemberPaper 2Question 7Component P2TZ07 marks
Waves, optics and imagingOscillations and simple harmonic motionWork, energy and power
Loading original question

Turn over 7. A vertical solid cylinder of uniform cross-sectional area A floats in water. The cylinder is partially submerged. When the cylinder floats at rest, a mark is aligned with the water surface. The cylinder is pushed vertically downwards so that the mark is a distance x below the water surface. x water surface cylinder pushed downwards cylinder floating at rest mark At time t = 0 the cylinder is released. The resultant vertical force F on the cylinder is related to the displacement x of the mark by F = - ρAgx where ρ is the density of water. (a) Outline why the cylinder performs simple harmonic motion when released. [1] (b) The mass of the cylinder is 118 kg and the cross-sectional area of the cylinder is 2.29 × 10-1 m2. The density of water is 1.03 × 103 kg m-3. Show that the angular frequency of oscillation of the cylinder is about 4.4 rad s–1. [2] (This question continues on the following page) (Question 7 continued) (c) The cylinder was initially pushed down a distance x = 0.250 m. (i) Determine the maximum kinetic energy Ekmax of the cylinder. [2] (ii) Draw, on the axes, the graph to show how the kinetic energy of the cylinder varies with time during one period of oscillation T. [2] time kinetic energy Ekmax 0 0 T

2020 NovemberPaper 3Question 2Component P3TZ06 marks
Mechanics and motionCircular motion and gravitation
Loading original question

2. A student studies the relationship between the centripetal force applied to an object undergoing circular motion and its period T. The object (mass m) is attached by a light inextensible string, through a tube, to a weight W which hangs vertically. The string is free to move through the tube. A student swings the mass in a horizontal, circular path, adjusting the period T of the motion until the radius r is constant. The radius of the circle and the mass of the object are measured and remain constant for the entire experiment. r hollow plastic tube m W The student collects the measurements of T fi ve times, for weight W. The weight is then doubled (2W) and the data collection repeated. Then it is repeated with 3W and 4W. The results are expected to support the relationship W mr T 4 2 2 . (a) State why the experiment is repeated with different values of W. [1] In reality, there is friction in the system, so in this case W is less than the total centripetal force in the system. A suitable graph is plotted to determine the value of mr experimentally. The value of mr was also calculated directly from the measured values of m and r. (b) Predict from the equation whether the value of mr found experimentally will be larger, the same or smaller than the value of mr calculated directly. [2] (This question continues on the following page) Turn over (Question 2 continued) (c) (i) The measurements of T were collected five times. Explain how repeated measurements of T reduced the random error in the final experimental value of mr. [2] (ii) Outline why repeated measurements of T would not reduce any systematic error in T. [1]

2020 NovemberPaper 3Question 8Component P3TZ06 marks
Mechanics and motionRigid body and rotational mechanics
Loading original question

8. A bar rotates horizontally about its centre, reaching a maximum angular velocity in six complete rotations from rest. The bar has a constant angular acceleration of 0.110 rad s–2. The moment of inertia of the bar about the axis of rotation is 0.0216 kg m2. (a) Show that the final angular velocity of the bar is about 3 rad s–1. [2] (b) Draw the variation with time t of the angular displacement θ of the bar during the acceleration. [1] / rad θ t / s (c) Calculate the torque acting on the bar while it is accelerating. [1] (Option B continues on the following page) Turn over (Option B, question 8 continued) (d) The torque is removed. The bar comes to rest in 30 complete rotations with constant angular deceleration. Determine the time taken for the bar to come to rest. [2] (Option B continues on the following page) (Option B continued)

2020 NovemberPaper 3Question 9Component P3TZ05 marks
Mechanics and motionRigid body and rotational mechanics
Loading original question

9. The first diagram shows a person standing on a turntable which can rotate freely. The person is stationary and holding a bicycle wheel. The wheel rotates anticlockwise when seen from above. A B turntable can rotate freely The wheel is flipped, as shown in the second diagram, so that it rotates clockwise when seen from above. A B (a) Explain the direction in which the person-turntable system starts to rotate. [3] (Option B continues on the following page) (Option B, question 9 continued) (b) Explain the changes to the rotational kinetic energy in the person-turntable system. [2]

2020 NovemberPaper 3Question 10Component P3TZ03 marks
Mechanics and motionRigid body and rotational mechanics
Loading original question

Turn over 10. A solid sphere of radius r and mass m is released from rest and rolls down a slope, without slipping. The vertical height of the slope is h. The moment of inertia I of this sphere about an axis through its centre is 2 5 2 mr . r h Show that the linear velocity v of the sphere as it leaves the slope is 10 7 gh . [3] (Option B continues on the following page) (Option B continued)

2019 NovemberPaper 1Question 2Component P1TZ01 mark
Mechanics and motionForces and dynamics
Loading original question

2. Two forces act along a straight line on an object that is initially at rest. One force is constant; the second force is in the opposite direction and proportional to the velocity of the object. varying force constant force object What is correct about the motion of the object? A. The acceleration increases from zero to a maximum. B. The acceleration increases from zero to a maximum and then decreases. C. The velocity increases from zero to a maximum. D. The velocity increases from zero to a maximum and then decreases.

2019 MayPaper 1Question 3Component P1TZ11 mark
Mechanics and motionKinematics and motion
Loading original question

3. A sky diver is falling at terminal speed when she opens her parachute. What are the direction of her velocity vector and the direction of her acceleration vector before she reaches the new terminal speed? Direction of velocity vector Direction of acceleration vector A. upwards upwards B. upwards downwards C. downwards upwards D. downwards downwards

2019 MayPaper 1Question 3Component P1TZ21 mark
Mechanics and motionKinematics and motion
Loading original question

3. A boy throws a ball horizontally at a speed of 15 m s-1 from the top of a cliff that is 80 m above the surface of the sea. Air resistance is negligible. What is the distance from the bottom of the cliff to the point where the ball lands in the sea? A. 45 m B. 60 m C. 80 m D. 240 m

2019 NovemberPaper 1Question 3Component P1TZ01 mark
Mechanics and motionKinematics and motion
Loading original question

3. A ball falls from rest in the absence of air resistance. The position of the centre of the ball is determined at one-second intervals from the instant at which it is released. What are the distances, in metres, travelled by the centre of the ball during each second for the first 4.0 s of the motion? A. 5, 10, 15, 20 B. 5, 15, 25, 35 C. 5, 20, 45, 80 D. 5, 25, 70, 150

2019 MayPaper 1Question 4Component P1TZ11 mark
Mechanics and motionKinematics and motion
Loading original question

4. A sports car is accelerated from 0 to 100 km per hour in 3 s. What is the acceleration of the car? A. 0.1 g B. 0.3 g C. 0.9 g D. 3 g

2019 MayPaper 1Question 4Component P1TZ21 mark
Mechanics and motionForces and dynamics
Loading original question

4. A book is at rest on a table. What is a pair of action–reaction forces for this situation according to Newton’s third law of motion? Force 1 Force 2 A. the force of the book on the table the force of the book on the Earth B. the force of the table on the Earth the force of the book on the table C. the force of the Earth on the book the force of the book on the Earth D. the force of the Earth on the book the force of the table on the book

Mechanics and motion: quick facts

How often does Mechanics and motion come up in IB Physics HL?

Mechanics and motion is tagged on 397 of the 2,028 IB Physics HL past-paper questions on PastPaperPrep (20%), from papers sat 2016-2026. Paper 1 has the most Mechanics and motion questions, with 299. These are archive counts, not a prediction, and a question can carry more than one topic.

Are the IB Physics HL Mechanics and motion questions free?

135 of the 397 IB Physics HL Mechanics and motion questions are free to practise. The other 262 need a plan for IB Physics HL, from $6 a month.

Do the IB Physics HL Mechanics and motion questions have answers?

Yes. Each IB Physics HL Mechanics and motion question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.

Worked explanations

See the method, not just the answer

Many questions have an Explanation button next to the answer. It follows the question's free or paid access.

Practise mechanics and motion

Example

Original example, not an exam question.

A car moving at 2 m s⁻¹ accelerates uniformly at 2 m s⁻² for 4 s. Find its final velocity and displacement.

  1. Final velocity. v = u + at = 2 + 2(4) = 10 m s⁻¹.
  2. Displacement. s = ut + ½at² = 2(4) + ½(2)(4²) = 24 m.
  3. Check. Average velocity × time = ½(2 + 10)(4) = 24 m.

“Every question for that one subtopic I kept failing, in one place.”

Ji-woo P.IB DP Year 2, South Korea