IB Physics HL · Topic practice

Waves, optics and imaging past paper questions

Use focused Waves, optics and imaging questions to practise the ideas in context, then return to a mixed set to check whether you can recognise the relevant approach without a topic prompt.

Appears inPaper 1 259Paper 2 67Paper 3 106

Sort questions

You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.

Unlock from $6/mo
24 free questions

2020 NovemberPaper 1Question 10Component P1TZ01 mark
Waves, optics and imagingOscillations and simple harmonic motion
Loading original question

10. An object moves with simple harmonic motion. The acceleration of the object is A. constant. B. always directed away from the centre of the oscillation. C. a maximum at the centre of the oscillation. D. a maximum at the extremes of the oscillation.

2020 NovemberPaper 1Question 11Component P1TZ01 mark
Waves, optics and imagingWave model and characteristics
Loading original question

11. A travelling wave has a frequency of 500 Hz. The closest distance between two points on the wave that have a phase difference of 60 rad 3 π       is 0.050 m. What is the speed of the wave? A. 25 m s–1 B. 75 m s–1 C. 150 m s–1 D. 300 m s–1

2020 NovemberPaper 1Question 12Component P1TZ01 mark
Waves, optics and imagingOptics and imaging systems
Loading original question

12. Wavefronts travel from air to medium Q as shown. air Q 45° 30° Q 45° 30° What is the refractive index of Q? A. sin sin 30 45 o o B. sin sin 45 30 o o C. sin sin 45 60 o o D. sin sin 60 45 o o

2020 NovemberPaper 1Question 13Component P1TZ01 mark
Waves, optics and imagingStanding waves, resonance and Doppler effect
Loading original question

Turn over 13. The air in a pipe, open at both ends, vibrates in the second harmonic mode. Q P What is the phase difference between the motion of a particle at P and the motion of a particle at Q? A. 0 B. 2 π C. π D. 2π

2020 NovemberPaper 1Question 27Component P1TZ01 mark
Waves, optics and imagingOscillations and simple harmonic motion
Loading original question

27. A simple pendulum and a mass–spring system oscillate with the same time period. The mass of the pendulum bob and the mass on the spring are initially identical. The masses are halved. What is time period of pendulum time period of mass spring system - when the masses have been changed? A. 2 2 B. 1 C. 2 D. 2

2020 NovemberPaper 1Question 28Component P1TZ01 mark
Waves, optics and imagingInterference, diffraction, polarization and resolution
Loading original question

28. Light is incident on a diffraction grating. The wavelengths of two spectral lines of the light differ by 0.59 nm and have a mean wavelength of 590 nm. The spectral lines are just resolved in the fourth order of the grating. What is the minimum number of grating lines that were illuminated? A. 25 B. 250 C. 1000 D. 4000

2020 NovemberPaper 1Question 29Component P1TZ01 mark
Waves, optics and imagingInterference, diffraction, polarization and resolution
Loading original question

29. White light is incident normally on separate diffraction gratings X and Y. Y has a greater number of lines per metre than X. Three statements about differences between X and Y are I. adjacent slits in the gratings are further apart for X than for Y II. the angle between red and blue light in a spectral order is greater in X than in Y III. the total number of visible orders is greater for X than for Y. Which statements are correct? A. I and II only B. I and III only C. II and III only D. I, II and III

2020 NovemberPaper 2Question 4Component P2TZ012 marks
Waves, optics and imagingInterference, diffraction, polarization and resolution
Loading original question

4. Two loudspeakers, A and B, are driven in phase and with the same amplitude at a frequency of 850 Hz. Point P is located 22.5 m from A and 24.3 m from B. The speed of sound is 340 m s–1. 22.5 m A P B 24.3 m (a) Deduce that a minimum intensity of sound is heard at P. [4] (This question continues on the following page) Turn over (Question 4 continued) (b) A microphone moves along the line from P to Q. PQ is normal to the line midway between the loudspeakers. A P Q direction of travel B The intensity of sound is detected by the microphone. Predict the variation of detected intensity as the microphone moves from P to Q. [2] (c) When both loudspeakers are operating, the intensity of sound recorded at Q is I0. Loudspeaker B is now disconnected. Loudspeaker A continues to emit sound with unchanged amplitude and frequency. The intensity of sound recorded at Q changes to IA. Estimate I I A 0 . [2] (This question continues on the following page) (Question 4 continued) (d) In another experiment, loudspeaker A is stationary and emits sound with a frequency of 850 Hz. The microphone is moving directly away from the loudspeaker with a constant speed v. The frequency of sound recorded by the microphone is 845 Hz. (i) Explain why the frequency recorded by the microphone is lower than the frequency emitted by the loudspeaker. [2] (ii) Calculate v. [2]

2020 NovemberPaper 2Question 7Component P2TZ07 marks
Waves, optics and imagingOscillations and simple harmonic motionWork, energy and power
Loading original question

Turn over 7. A vertical solid cylinder of uniform cross-sectional area A floats in water. The cylinder is partially submerged. When the cylinder floats at rest, a mark is aligned with the water surface. The cylinder is pushed vertically downwards so that the mark is a distance x below the water surface. x water surface cylinder pushed downwards cylinder floating at rest mark At time t = 0 the cylinder is released. The resultant vertical force F on the cylinder is related to the displacement x of the mark by F = - ρAgx where ρ is the density of water. (a) Outline why the cylinder performs simple harmonic motion when released. [1] (b) The mass of the cylinder is 118 kg and the cross-sectional area of the cylinder is 2.29 × 10-1 m2. The density of water is 1.03 × 103 kg m-3. Show that the angular frequency of oscillation of the cylinder is about 4.4 rad s–1. [2] (This question continues on the following page) (Question 7 continued) (c) The cylinder was initially pushed down a distance x = 0.250 m. (i) Determine the maximum kinetic energy Ekmax of the cylinder. [2] (ii) Draw, on the axes, the graph to show how the kinetic energy of the cylinder varies with time during one period of oscillation T. [2] time kinetic energy Ekmax 0 0 T

2020 NovemberPaper 3Question 12Component P3TZ010 marks
Thermal and energy systemsThermal concepts and energy transferOscillations and simple harmonic motion
Loading original question

Turn over 12. (a) State two properties of an ideal fluid. [2] (b) A sphere is dropped into a container of oil. The following data are available. Density of oil = 915 kg m-3 Viscosity of oil = 37.9 × 10-3 Pa s Volume of sphere = 7.24 × 10-6 m3 Mass of sphere = 12.6 g Determine the terminal velocity of the sphere. [3] (Option B continues on the following page) (Option B, question 12 continued) (c) The sphere is now suspended from a spring so that the sphere is below the surface of the oil. (i) Determine the force exerted by the spring on the sphere when the sphere is at rest. [2] (ii) The sphere oscillates vertically within the oil at the natural frequency of the sphere-spring system. The energy is reduced in each cycle by 10 %. Calculate the Q factor for this system. [1] (iii) Outline the effect on Q of changing the oil to one with greater viscosity. [2] End of Option B

2020 NovemberPaper 3Question 13Component P3TZ03 marks
Waves, optics and imagingOptics and imaging systems
Loading original question

Turn over 13. The diagram represents a diverging mirror being used to view an object. centre of the mirror object eye (a) Construct a single ray showing one path of light between the eye, the mirror and the object, to view the object. [2] (b) The image observed is virtual. Outline the meaning of virtual image. [1] (Option C continues on the following page) (Option C continued)

2020 NovemberPaper 3Question 14Component P3TZ09 marks
Waves, optics and imagingOptics and imaging systems
Loading original question

14. A beam of monochromatic light from infinity is incident on a converging lens A. The diagram shows three wavefronts of the light and the focal point f of the lens. f direction of travel of wavefronts A (a) Draw on the diagram the three wavefronts after they have passed through the lens. [2] (b) Lens A has a focal length of 4.00 cm. An object is placed 4.50 cm to the left of A. Show by calculation that a screen should be placed about 0.4 m from A to display a focused image. [2] (Option C continues on the following page) Turn over (Option C, question 14 continued) (c) The screen is removed and the image is used as the object for a second diverging lens B, to form a final image. Lens B has a focal length of 2.00 cm and the final real image is 8.00 cm from the lens. Calculate the distance between lens A and lens B. [3] (d) Calculate the total magnification of the object by the lens combination. [2] (Option C continues on the following page) (Option C continued)

2020 NovemberPaper 3Question 15Component P3TZ05 marks
Waves, optics and imagingOptics and imaging systems
Loading original question

15. (a) Outline the meaning of normal adjustment for a compound microscope. [1] (b) Sketch a ray diagram to find the position of the images for both lenses in the compound microscope at normal adjustment. The object is at O and the focal lengths of the objective and eyepiece lenses are shown. [4] fo fo fe fe O (Option C continues on the following page) (Option C continued)

2020 NovemberPaper 3Question 16Component P3TZ03 marks
Waves, optics and imagingOptics and imaging systemsWave model and characteristics
Loading original question

16. A single pulse of light enters an optic fi bre which contains small impurities that scatter the light. Explain the effect of these impurities on the pulse. [3]

2020 NovemberPaper 3Question 17Component P3TZ04 marks
Waves, optics and imagingOptics and imaging systems
Loading original question

Turn over 17. The photograph shows an X-ray image of a hand. (a) Explain how attenuation causes the contrast between soft tissue and bone in the image. [3] (Option C continues on the following page) (Option C, question 17 continued) (b) X-ray images of other parts of the body require the contrast to be enhanced. State one technique used in X-ray medical imaging to enhance contrast. [1]

2020 NovemberPaper 3Question 18Component P3TZ06 marks
Waves, optics and imagingOptics and imaging systems
Loading original question

18. (a) Explain the cause of the radio-frequency emissions from a patient’s body during nuclear magnetic resonance (NMR) imaging. [3] (b) Outline how a gradient field allows NMR to be used in medical resonance imaging. [2] (c) Identify one advantage of NMR over ultrasound in medical situations. [1] End of Option C

2019 MayPaper 1Question 11Component P1TZ11 mark
Waves, optics and imagingOscillations and simple harmonic motion
Loading original question

11. A particle performs simple harmonic motion (shm). What is the phase difference between the displacement and the acceleration of the particle? A. 0 B. π 2 C. π D. 3π 2

2019 NovemberPaper 1Question 11Component P1TZ01 mark
Waves, optics and imagingWave model and characteristics
Loading original question

11. A transverse travelling wave is moving through a medium. The graph shows, for one instant, the variation with distance of the displacement of particles in the medium. 0 0 displacement distance up down X Y Z The frequency of the wave is 25 Hz and the speed of the wave is 100 m s–1. What is correct for this wave? A. The particles at X and Y are in phase. B. The velocity of the particle at X is a maximum. C. The horizontal distance between X and Z is 3.0 m. D. The velocity of the particle at Y is 100 m s–1.

2019 MayPaper 1Question 12Component P1TZ11 mark
Waves, optics and imagingOscillations and simple harmonic motion
Loading original question

12. Which graph shows the variation with time t of the kinetic energy (KE) of an object undergoing simple harmonic motion (shm) of period T? 2T T 2T T 2T T 2T T A. B. C. D. 1.5 1.0 0.5 0 −0.5 −1.0 −1.5 1.5 1.0 0.5 0 −0.5 −1.0 −1.5 1.5 1.0 0.5 0 1.5 1.0 0.5 0 t t t t KE KE KE KE

2019 NovemberPaper 1Question 12Component P1TZ01 mark
Waves, optics and imagingWave model and characteristics
Loading original question

12. The graph shows the variation with time for the displacement of a particle in a travelling wave. displacement / 10–6 m 2.0 1.0 1.5 0.5 0.0 0 5 10 15 20 25 30 35 40 – 1.0 – 0.5 – 1.5 – 2.0 time / 10–6 s What are the frequency and amplitude for the oscillation of the particle? Frequency / kHz Amplitude / µm A. 20 2 B. 20 4 C. 50 2 D. 50 4 Turn over

Waves, optics and imaging: quick facts

How often does Waves, optics and imaging come up in IB Physics HL?

Waves, optics and imaging is tagged on 432 of the 2,028 IB Physics HL past-paper questions on PastPaperPrep (21%), from papers sat 2016-2026. Paper 1 has the most Waves, optics and imaging questions, with 259. These are archive counts, not a prediction, and a question can carry more than one topic.

Are the IB Physics HL Waves, optics and imaging questions free?

185 of the 432 IB Physics HL Waves, optics and imaging questions are free to practise. The other 247 need a plan for IB Physics HL, from $6 a month.

Do the IB Physics HL Waves, optics and imaging questions have answers?

Yes. Each IB Physics HL Waves, optics and imaging question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.

“Every question for that one subtopic I kept failing, in one place.”

Ji-woo P.IB DP Year 2, South Korea