IB Chemistry SL · Paper practice

Paper 2 past paper questions

Every archived Chemistry SL Paper 2 question in one place. Practise them by topic, then sit a full paper under timed conditions.

Most-tested topicsBonding, structure and materials 68Matter, amounts and stoichiometry 68Organic chemistry and molecular analysis 48Atomic structure and periodicity 47Energetics, thermodynamics and fuels 44Acids and bases 43

Sort questions

You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.

Unlock from $6/mo
24 free questions

2020 NovemberPaper 2Question 1Component P2TZ028 marks
Atomic structure and periodicityNuclear atom, isotopes and mass spectraElectron configurations and emission spectraPeriodic table and trendsThe mole and reacting quantities
Loading original question

1. Chlorine undergoes many reactions. (a) (i) State the full electron configuration of the chlorine atom. [1] (ii) State, giving a reason, whether the chlorine atom or the chloride ion has a larger radius. [1] (iii) Outline why the chlorine atom has a smaller atomic radius than the sulfur atom. [2] (This question continues on the following page) Turn over (Question 1 continued) (iv) The mass spectrum of chlorine is shown. m/z Relative abundance 60 50 70 30 20 10 0 40 Outline the reason for the two peaks at m/z = 35 and 37. [1] (v) Explain the presence and relative abundance of the peak at m/z = 74. [2] (b) 2.67 g of manganese(IV) oxide was added to 200.0 cm3 of 2.00 mol dm−3 HCl. MnO2 (s) + 4HCl (aq) → Cl2 (g) + 2H2O (l) + MnCl2 (aq) (i) Calculate the amount, in mol, of manganese(IV) oxide added. [1] (This question continues on the following page) (Question 1 continued) (ii) Determine the limiting reactant, showing your calculations. [2] (iii) Determine the excess amount, in mol, of the other reactant. [1] (iv) Calculate the volume of chlorine, in dm3, produced if the reaction is conducted at standard temperature and pressure (STP). Use section 2 of the data booklet. [1] (v) State the oxidation state of manganese in MnO2 and MnCl2. [2] MnO2: MnCl2: (vi) Deduce, referring to oxidation states, whether MnO2 is an oxidizing or reducing agent. [1] (This question continues on the following page) Turn over (Question 1 continued) (c) Chlorine gas reacts with water to produce hypochlorous acid and hydrochloric acid. Cl2 (g) + H2O (l)  HClO (aq) + HCl (aq) (i) Hypochlorous acid is considered a weak acid. Outline what is meant by the term weak acid. [1] (ii) State the formula of the conjugate base of hypochlorous acid. [1] (iii) Calculate the concentration of H+ (aq) in a HClO (aq) solution with a pH = 3.61. [1] (d) (i) State the type of reaction occurring when ethane reacts with chlorine to produce chloroethane. [1] (ii) Predict, giving a reason, whether ethane or chloroethane is more reactive. [1] (This question continues on the following page) (Question 1 continued) (iii) Write the equation for the reaction of chloroethane with a dilute aqueous solution of sodium hydroxide. [1] (iv) Deduce the nucleophile for the reaction in d(iii). [1] (v) Ethoxyethane (diethyl ether) can be used as a solvent for this conversion. Draw the structural formula of ethoxyethane. [1] (vi) Deduce the number of signals and their chemical shifts in the 1H NMR spectrum of ethoxyethane. Use section 27 of the data booklet. [2] (This question continues on the following page) (Question 1 continued) (e) CCl2F2 is a common chlorofluorocarbon, CFC. (i) Calculate the percentage by mass of chlorine in CCl2F2. [2] (ii) Comment on how international cooperation has contributed to the lowering of CFC emissions responsible for ozone depletion. [1]

2020 NovemberPaper 2Question 2Component P2TZ06 marks
Bonding, structure and materialsLewis structures, VSEPR, hybridization, formal charge and resonanceMass spectrometry, IR, NMR and chromatographyRepresentations, nomenclature and isomerismEquilibrium constants and reaction quotient
Loading original question

Turn over 2. Compound A is in equilibrium with compound B. OH O A B (a) Predict the electron domain and molecular geometries around the oxygen atom of molecule A using VSEPR. [2] Electron domain geometry: Molecular geometry: (This question continues on the following page) (Question 2 continued) (b) The IR spectrum of one of the compounds is shown: 4500 4000 3500 3000 2500 2000 1500 1000 0.0 0.2 0.4 0.6 0.5 0.3 0.1 0.8 0.7 0.9 Wavenumber / cm–1 Transmittance Deduce, giving a reason, the compound producing this spectrum. [1] (c) Compound A and B are isomers. Draw two other structural isomers with the formula C3H6O. [2] (This question continues on the following page) (Question 2 continued) (d) The equilibrium constant, Kc, for the conversion of A to B is 1.0 × 108 in water at 298 K. Deduce, giving a reason, which compound, A or B, is present in greater concentration when equilibrium is reached. [1]

2020 NovemberPaper 2Question 3Component P2TZ05 marks
Energetics, thermodynamics and fuelsHess cycles, Born-Haber cycles and bond enthalpy
Loading original question

Turn over 3. An equation for the combustion of propane is given below. C3H8 (g) + 5O2 (g) → 3CO2 (g) + 4H2O (g) (a) Determine the standard enthalpy change, ΔH Ö, for this reaction, using section 11 of the data booklet. [3] (b) Calculate the standard enthalpy change, ΔH Ö, for this reaction using section 12 of the data booklet. [2]

2020 NovemberPaper 2Question 4Component P2TZ011 marks
KineticsEnergy profiles and catalystsCollision theory and rate factorsIntermolecular forces and solidsElectrochemical cells and potentials
Loading original question

4. Nickel catalyses the conversion of propanone to propan-2-ol. O OH H2 Ni, heat (a) Outline how a catalyst increases the rate of reaction. [1] (b) Explain why an increase in temperature increases the rate of reaction. [2] (c) Discuss, referring to intermolecular forces present, the relative volatility of propanone and propan-2-ol. [3] (This question continues on the following page) (Question 4 continued) (d) (i) The diagram shows an unlabelled voltaic cell for the reaction Pb2+ (aq) + Ni (s) → Ni2+ (aq) + Pb (s) Label the diagram with the species in the equation. [1] − + v Anode Cathode (ii) Suggest a metal that could replace nickel in a new half-cell and reverse the electron flow. Use section 25 of the data booklet. [1] (iii) Describe the bonding in metals. [2] (iv) Nickel alloys are used in aircraft gas turbines. Suggest a physical property altered by the addition of another metal to nickel. [1]

2019 MayPaper 2Question 1Component P2TZ17 marks
Organic chemistry and molecular analysisSynthesis and mechanismsRepresentations, nomenclature and isomerismFunctional groups and reactions
Loading original question

1. Xylene is a derivative of benzene. One isomer is 1,4-dimethylbenzene. H3C CH3 (a) State the number of 1H NMR signals for this isomer of xylene and the ratio in which they appear. [2] Number of signals: Ratio: (b) Draw the structure of one other isomer of xylene which retains the benzene ring. [1] (This question continues on the following page) (Question 1 continued) (c) Bromine reacts with alkanes. (i) Identify the initiation step of the reaction and its conditions. [2] (ii) 1,4-dimethylbenzene reacts as a substituted alkane. Draw the structures of the two products of the overall reaction when one molecule of bromine reacts with one molecule of 1,4-dimethylbenzene. [2] Turn over M19/4/CHEMI/SP2/ENG/TZ1/XX

2019 MayPaper 2Question 1Component P2TZ218 marks
Energetics, thermodynamics and fuelsHess cycles, Born-Haber cycles and bond enthalpyMass spectrometry, IR, NMR and chromatography
Loading original question

1. Ethyne, C2H2, reacts with oxygen in welding torches. (a) Write an equation for the complete combustion of ethyne. [1] (b) (i) Deduce the Lewis (electron dot) structure of ethyne. [1] (ii) Compare, giving a reason, the length of the bond between the carbon atoms in ethyne with that in ethane, C2H6. [1] (iii) Identify the type of interaction that must be overcome when liquid ethyne vaporizes. [1] (This question continues on the following page) (Question 1 continued) (c) Ethyne reacts with steam. C2H2 (g) + H2O (g) → C2H4O (g) Two possible products are: H O O C H and H C C H H C H H H A B (i) Product A contains a carbon–carbon double bond. State the type of reactions that compounds containing this bond are likely to undergo. [1] (ii) State the name of product B, applying IUPAC rules. [1] (iii) Determine the enthalpy change for the reaction, in kJ, to produce A using section 11 of the data booklet. [3] (This question continues on the following page) Turn over M19/4/CHEMI/SP2/ENG/TZ2/XX (Question 1 continued) (iv) The enthalpy change for the reaction to produce B is −213 kJ. Predict, giving a reason, which product is the most stable. [1] (v) The IR spectrum and low resolution 1H NMR spectrum of the actual product formed are shown. IR spectrum Wavenumber / cm–1 Transmittance 0.8 0.6 0.4 0.2 3000 2000 1000 [Source: NIST Chemistry WebBook SRD 69 https://webbook.nist.gov/chemistry/ DOI: https://doi.org/10.18434/T4D303 http://webbook.nist.gov/cgi/inchi?Spec=C75070&Index=2&Type=IR Acetaldehyde: Data compiled by: Coblentz Society, Inc.] 1H NMR spectrum 10 8 6 4 2 0 Chemical shift / ppm (This question continues on the following page) M19/4/CHEMI/SP2/ENG/TZ2/XX (Question 1 continued) Deduce whether the product is A or B, using evidence from these spectra together with sections 26 and 27 of the data booklet. [2] Identity of product: One piece of evidence from IR: One piece of evidence from 1H NMR: (This question continues on page 7) Turn over M19/4/CHEMI/SP2/ENG/TZ2/XX Please do not write on this page. Answers written on this page will not be marked. M19/4/CHEMI/SP2/ENG/TZ2/XX (Question 1 continued) (d) Product B, CH3CHO, can also be synthesized from ethanol. (i) Suggest the reagents and conditions required to ensure a good yield of product B. [2] Reagents: Conditions: (ii) Deduce the average oxidation state of carbon in product B. [1] (iii) Explain why product B is water soluble. [3] Turn over M19/4/CHEMI/SP2/ENG/TZ2/XX

2019 NovemberPaper 2Question 1Component P2TZ07 marks
Bonding, structure and materialsLewis structures, VSEPR, hybridization, formal charge and resonance
Loading original question

1. The equations show steps in the formation and decomposition of ozone in the stratosphere, some of which absorb ultraviolet light. Step 1 O2 → 2O• Step 2 O• + O2 → O3 Step 3 O3 → O• + O2 Step 4 O• + O3 → 2O2 (a) Draw the Lewis structures of oxygen, O2, and ozone, O3. [2] (b) Outline why both bonds in the ozone molecule are the same length and predict the bond length in the ozone molecule. Refer to section 10 of the data booklet. [2] Reason: Length: (c) Distinguish ultraviolet light from visible light in terms of wavelength and energy. [1] (This question continues on the following page) (Question 1 continued) (d) Discuss how the different bond strengths between the oxygen atoms in O2 and O3 in the ozone layer affect radiation reaching the Earth’s surface. [2] Turn over N19/4/CHEMI/SP2/ENG/TZ0/XX

2019 MayPaper 2Question 2Component P2TZ16 marks
Acids and basesPH, strong and weak acids and bases, Ka and KbAcid-base theories
Loading original question

2. Benzoic acid, C6H5COOH, is another derivative of benzene. (a) Draw the structure of the conjugate base of benzoic acid showing all the atoms and all the bonds. [1] (b) (i) The pH of an aqueous solution of benzoic acid at 298 K is 2.95. Determine the concentration of hydroxide ions in the solution, using section 2 of the data booklet. [2] (ii) Formulate the equation for the complete combustion of benzoic acid in oxygen using only integer coefficients. [2] (This question continues on the following page) (Question 2 continued) (c) Suggest how benzoic acid, Mr = 122.13, forms an apparent dimer, Mr = 244.26, when dissolved in a non-polar solvent such as hexane. [1] M19/4/CHEMI/SP2/ENG/TZ1/XX

2019 MayPaper 2Question 2Component P2TZ29 marks
KineticsCollision theory and rate factorsEnergy profiles and catalystsGraphical and data processing
Loading original question

2. The thermal decomposition of dinitrogen monoxide occurs according to the equation: 2N2O (g) → 2N2 (g) + O2 (g) The reaction can be followed by measuring the change in total pressure, at constant temperature, with time. The x-axis and y-axis are shown with arbitrary units. 0 2 4 6 8 10 12 14 16 18 20 0 50 100 150 200 250 300 350 Time Pressure (a) Explain why, as the reaction proceeds, the pressure increases by the amount shown. [2] (b) Outline, in terms of collision theory, how a decrease in pressure would affect the rate of reaction. [2] (This question continues on the following page) (Question 2 continued) (c) The experiment is repeated using the same amount of dinitrogen monoxide in the same apparatus, but at a lower temperature. Sketch, on the axes in question 2, the graph that you would expect. [2] (d) The experiment gave an error in the rate because the pressure gauge was inaccurate. Outline whether repeating the experiment, using the same apparatus, and averaging the results would reduce the error. [1] (e) The graph below shows the Maxwell–Boltzmann distribution of molecular energies at a particular temperature. Kinetic energy Fraction of particles The rate at which dinitrogen monoxide decomposes is significantly increased by a metal oxide catalyst. Annotate and use the graph to outline why a catalyst has this effect. [2] Turn over M19/4/CHEMI/SP2/ENG/TZ2/XX

2019 NovemberPaper 2Question 2Component P2TZ07 marks
Matter, amounts and stoichiometryThe mole and reacting quantitiesUncertainty and error
Loading original question

2. The biochemical oxygen demand of a water sample can be determined by the following series of reactions. The final step is titration of the sample with sodium thiosulfate solution, Na2S2O3 (aq). 2Mn2+ (aq) + O2 (aq) + 4OH− (aq) → 2MnO2 (s) + 2H2O (l) MnO2 (s) + 2I− (aq) + 4H+ (aq) → Mn2+ (aq) + I2 (aq) + 2H2O (l) 2S2O3 2− (aq) + I2 (aq) → 2I− (aq) + S4O6 2− (aq) A student analysed two 300.0 cm3 samples of water taken from the school pond: one immediately (day 0), and the other after leaving it sealed in a dark cupboard for five days (day 5). The following results were obtained for the titration of the samples with 0.0100 mol dm−3 Na2S2O3 (aq). Sample Titre / cm3 ±0.1 cm3 Day 0 25.8 Day 5 20.1 (a) (i) Determine the mole ratio of S2O3 2− to O2, using the balanced equations. [1] (This question continues on the following page) (Question 2 continued) (ii) Calculate the number of moles of oxygen in the day 0 sample. [2] (iii) The day 5 sample contained 5.03 × 10−5 moles of oxygen. Determine the 5-day biochemical oxygen demand of the pond, in mg dm−3 (“parts per million”, ppm). [2] (b) (i) Calculate the percentage uncertainty of the day 5 titre. [1] (ii) Suggest a modification to the procedure that would make the results more reliable. [1] Turn over N19/4/CHEMI/SP2/ENG/TZ0/XX

2019 MayPaper 2Question 3Component P2TZ113 marks
Energetics, thermodynamics and fuelsHess cycles, Born-Haber cycles and bond enthalpyThe mole and reacting quantitiesOxidation states and half-equations
Loading original question

3. This question is about compounds of sodium. (a) (i) Describe the structure and bonding in solid sodium oxide. [2] (ii) Write equations for the separate reactions of solid sodium oxide and solid phosphorus(V) oxide with excess water and differentiate between the solutions formed. [3] Sodium oxide, Na2O: Phosphorus(V) oxide, P4O10: Differentiation: (This question continues on the following page) Turn over (Question 3 continued) (b) Sodium peroxide, Na2O2, is formed by the reaction of sodium oxide with oxygen. 2Na2O (s) + O2 (g) → 2Na2O2 (s) Calculate the percentage yield of sodium peroxide if 5.00 g of sodium oxide produces 5.50 g of sodium peroxide. [2] (c) Sodium peroxide is used in diving apparatus to produce oxygen from carbon dioxide. 2Na2O2 (s) + 2CO2 (g) → 2Na2CO3 (s) + O2 (g) (i) Determine the enthalpy change, ∆H, in kJ, for this reaction using data from the table and section 12 of the data booklet. [3] ∆Hf / kJ mol–1 Na2O2 (s) −510.9 Na2CO3 (s) −1130.7 (This question continues on the following page) M19/4/CHEMI/SP2/ENG/TZ1/XX (Question 3 continued) (ii) Outline why bond enthalpy values are not valid in calculations such as that in (c)(i). [1] (d) The reaction of sodium peroxide with excess water produces hydrogen peroxide and one other sodium compound. Suggest the formula of this compound. [1] (e) State the oxidation number of carbon in sodium carbonate, Na2CO3. [1] Turn over M19/4/CHEMI/SP2/ENG/TZ1/XX

2019 MayPaper 2Question 3Component P2TZ27 marks
Atomic structure and periodicityNuclear atom, isotopes and mass spectra
Loading original question

3. Dinitrogen monoxide, N2O, causes depletion of ozone in the stratosphere. (a) Outline why ozone in the stratosphere is important. [1] (b) Different sources of N2O have different ratios of 14N : 15N. (i) State one analytical technique that could be used to determine the ratio of 14N : 15N. [1] (ii) A sample of gas was enriched to contain 2 % by mass of 15N with the remainder being 14N. Calculate the relative molecular mass of the resulting N2O. [2] (iii) Predict, giving two reasons, how the first ionization energy of 15N compares with that of 14N. [2] (c) Suggest why it is surprising that dinitrogen monoxide dissolves in water to give a neutral solution. [1]

2019 NovemberPaper 2Question 3Component P2TZ011 marks
Organic chemistry and molecular analysisFunctional groups and reactionsPolymers, materials, alloys and nanotechnologyIntermolecular forces and solids
Loading original question

3. The following shows some compounds which can be made from ethene, C2H4. ethene (C2H4) → C2H5Cl → C2H6O → C2H4O (a) State the type of reaction which converts ethene into C2H5Cl. [1] (b) Write an equation for the reaction of C2H5Cl with aqueous sodium hydroxide to produce a C2H6O compound, showing structural formulas. [1] (c) (i) Write an equation for the complete combustion of the organic product in (b). [1] (ii) Determine the enthalpy of combustion of the organic product in (b), in kJ mol−1, using data from section 11 of the data booklet. [3] (This question continues on the following page) (Question 3 continued) (d) (i) State the reagents and conditions for the conversion of the compound C2H6O, produced in (b), into C2H4O. [2] (ii) Explain why the compound C2H6O, produced in (b), has a higher boiling point than compound C2H4O, produced in d(i). [2] (e) Ethene is often polymerized. Draw a section of the resulting polymer, showing two repeating units. [1] Turn over N19/4/CHEMI/SP2/ENG/TZ0/XX Please do not write on this page. Answers written on this page will not be marked. N19/4/CHEMI/SP2/ENG/TZ0/XX

2019 MayPaper 2Question 4Component P2TZ112 marks
KineticsCollision theory and rate factorsThe mole and reacting quantities
Loading original question

4. This question is about peroxides. (a) Suggest why many chemicals, including hydrogen peroxide, are kept in brown bottles instead of clear colourless bottles. [1] (b) Hydrogen peroxide decomposes to water and oxygen when a catalyst such as potassium iodide, KI, is added. 2H2O2 (aq) KI (aq) O2 (g) + 2H2O (l) (i) In a laboratory experiment solutions of potassium iodide and hydrogen peroxide were mixed and the volume of oxygen generated was recorded. The volume was adjusted to 0 at t = 0. 0 5 10 15 20 25 The data for the first trial is given below. Time / s Volume of O2 (g) / cm3 100 2.5 300 6.5 500 11.0 700 15.0 (This question continues on the following page) (Question 4 continued) Plot a graph on the axes below and from it determine the average rate of formation of oxygen gas in cm3 O2 (g) s−1. [3] 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 100 200 300 400 500 600 700 Volume of O2 (g) / cm3 Time / s Average rate of reaction: (This question continues on the following page) Turn over M19/4/CHEMI/SP2/ENG/TZ1/XX (Question 4 continued) (ii) Additional experiments were carried out at an elevated temperature. On the axes below, sketch Maxwell–Boltzmann energy distribution curves at two temperatures T1 and T2, where T2 > T1. [2] Kinetic energy Fraction of particles (iii) Apart from a greater frequency of collisions, explain, by annotating your graphs in (b)(ii), why an increased temperature causes the rate of reaction to increase. [2] (iv) MnO2 is another possible catalyst for the reaction. State the IUPAC name for MnO2. [1] (This question continues on the following page) M19/4/CHEMI/SP2/ENG/TZ1/XX (Question 4 continued) (c) Comment on why peracetic acid, CH3COOOH, is always sold in solution with ethanoic acid and hydrogen peroxide. H2O2 (aq) + CH3COOH (aq)  CH3COOOH (aq) + H2O (l) [1] (d) Sodium percarbonate, 2Na2CO3•3H2O2, is an adduct of sodium carbonate and hydrogen peroxide and is used as a cleaning agent. Mr (2Na2CO3•3H2O2) = 314.04 Calculate the percentage by mass of hydrogen peroxide in sodium percarbonate, giving your answer to two decimal places. [2] Turn over M19/4/CHEMI/SP2/ENG/TZ1/XX

2019 MayPaper 2Question 4Component P2TZ27 marks
Atomic structure and periodicityPeriodic table and trends
Loading original question

4. Rhenium, Re, was the last element with a stable isotope to be isolated. (a) Before its isolation, scientists predicted the existence of rhenium and some of its properties. Suggest the basis of these predictions. [2] (b) Describe how the relative reactivity of rhenium, compared to silver, zinc, and copper, can be established using pieces of rhenium and solutions of these metal sulfates. [2] (c) One chloride of rhenium has the empirical formula ReCl3. (i) State the name of this compound, applying IUPAC rules. [1] (ii) Calculate the percentage, by mass, of rhenium in ReCl3. [2] Turn over

2019 NovemberPaper 2Question 4Component P2TZ05 marks
Acids and basesPH, strong and weak acids and bases, Ka and KbAcid-base theories
Loading original question

4. A molecule of citric acid, C6H8O7, is shown. O OH O O HO OH OH The equation for the first dissociation of citric acid in water is C6H8O7 (aq) + H2O (l)  C6H7O7 − (aq) + H3O+ (aq) (a) (i) Identify a conjugate acid–base pair in the equation. [1] (ii) The value of the equilibrium constant for the first dissociation at 298 K is 5.01 × 10−4. State, giving a reason, the strength of citric acid. [1] (iii) The dissociation of citric acid is an endothermic process. State the effect on the hydrogen ion concentration, [H+], and on the equilibrium constant, of increasing the temperature. [2] Effect on [H+] Effect on equilibrium constant (b) Outline one laboratory method of distinguishing between solutions of citric acid and hydrochloric acid of equal concentration, stating the expected observations. [1] Turn over

2019 MayPaper 2Question 5Component P2TZ17 marks
Bonding, structure and materialsLewis structures, VSEPR, hybridization, formal charge and resonance
Loading original question

5. Both vinegar (a dilute aqueous solution of ethanoic acid) and bleach are used as cleaning agents. (a) Outline why ethanoic acid is classified as a weak acid. [1] (b) A solution of bleach can be made by reacting chlorine gas with a sodium hydroxide solution. Cl2 (g) + 2NaOH (aq)  NaOCl (aq) + NaCl (aq) + H2O (l) Suggest, with reference to Le Châtelier’s principle, why it is dangerous to mix vinegar and bleach together as cleaners. [3] (c) Bleach reacts with ammonia, also used as a cleaning agent, to produce the poisonous compound chloramine, NH2Cl. (i) Draw a Lewis (electron dot) structure of chloramine. [1] (This question continues on the following page) (Question 5 continued) (ii) Deduce the molecular geometry of chloramine and estimate its H–N–H bond angle. [2] Molecular geometry: H–N–H bond angle: M19/4/CHEMI/SP2/ENG/TZ1/XX

2019 MayPaper 2Question 5Component P2TZ29 marks
EquilibriumLe Chatelier's principlePH, strong and weak acids and bases, Ka and KbAcid-base theoriesThe mole and reacting quantities
Loading original question

5. Carbonated water is produced when carbon dioxide is dissolved in water under pressure. The following equilibria are established. Equilibrium (1) CO2 (g) H2O (l) CO2 (aq) Equilibrium (2) CO2 (aq) + H2O (l) H+ (aq) + HCO3 − (aq) (a) Carbon dioxide acts as a weak acid. (i) Distinguish between a weak and strong acid. [1] Weak acid: Strong acid: (ii) The hydrogencarbonate ion, produced in Equilibrium (2), can also act as an acid. State the formula of its conjugate base. [1] (iii) When a bottle of carbonated water is opened, these equilibria are disturbed. State, giving a reason, how a decrease in pressure affects the position of Equilibrium (1). [1] (This question continues on the following page) (Question 5 continued) (b) Soda water has sodium hydrogencarbonate, NaHCO3, dissolved in the carbonated water. (i) Predict, referring to Equilibrium (2), how the added sodium hydrogencarbonate affects the pH. (Assume pressure and temperature remain constant.) [2] (ii) 100.0 cm3 of soda water contains 3.0 × 10−2 g NaHCO3. Calculate the concentration of NaHCO3 in mol dm−3. [2] (iii) Identify the type of bonding in sodium hydrogencarbonate. [2] Between sodium and hydrogencarbonate: Between hydrogen and oxygen in hydrogencarbonate: M19/4/CHEMI/SP2/ENG/TZ2/XX

2019 NovemberPaper 2Question 5Component P2TZ013 marks
KineticsEnergy profiles and catalystsElectron configurations and emission spectra
Loading original question

5. Copper forms two chlorides, copper(I) chloride and copper(II) chloride. (a) (i) State the electron configuration of the Cu+ ion. [1] (ii) Copper(II) chloride is used as a catalyst in the production of chlorine from hydrogen chloride. 4HCl (g) + O2 (g) → 2Cl2 (g) + 2H2O (g) Calculate the standard enthalpy change, ∆H Ö, in kJ, for this reaction, using section 12 of the data booklet. [2] (iii) The diagram shows the Maxwell–Boltzmann distribution and potential energy profile for the reaction without a catalyst. Annotate both charts to show the activation energy for the catalysed reaction, using the label Ea (cat). [2] Ea Kinetic energy Proportion of molecules Potential energy Progress of reaction 4HCl (g) + O2 (g) Ea 2Cl2 (g) + 2H2O (g) (This question continues on the following page) (Question 5 continued) (iv) Explain how the catalyst increases the rate of the reaction. [2] (b) Solid copper(II) chloride absorbs moisture from the atmosphere to form a hydrate of formula CuCl2•xH2O. A student heated a sample of hydrated copper(II) chloride, in order to determine the value of x. The following results were obtained: Mass of crucible = 16.221 g Initial mass of crucible and hydrated copper(II) chloride = 18.360 g Final mass of crucible and anhydrous copper(II) chloride = 17.917 g Determine the value of x. [3] (This question continues on the following page) Turn over N19/4/CHEMI/SP2/ENG/TZ0/XX (Question 5 continued) (c) An electrolysis cell was assembled using graphite electrodes and connected as shown. + − 1 2 Molten copper(I) chloride (i) State how current is conducted through the wires and through the electrolyte. [2] Wires: Electrolyte: (ii) Write the half-equation for the formation of gas bubbles at electrode 1. [1] N19/4/CHEMI/SP2/ENG/TZ0/XX

2019 MayPaper 2Question 6Component P2TZ15 marks
Atomic structure and periodicityNuclear atom, isotopes and mass spectraElectrochemical cells and potentials
Loading original question

6. This question is about iron. (a) State the nuclear symbol notation, A Z X, for iron-54. [1] (b) Mass spectrometry analysis of a sample of iron gave the following results: % abundance Fe-54 5.84 Fe-56 91.68 Fe-57 2.17 Fe-58 0.31 Calculate the relative atomic mass, Ar, of this sample of iron to two decimal places. [2] (This question continues on the following page) Turn over (Question 6 continued) (c) An iron nail and a copper nail are inserted into a lemon. Lemon Copper nail Iron nail V Explain why a potential is detected when the nails are connected through a voltmeter. [2] M19/4/CHEMI/SP2/ENG/TZ1/XX

Full Paper 2 past papers with mark schemes

Paper 2: quick facts

Which topics come up most in IB Chemistry SL Paper 2?

The most-tagged topics in IB Chemistry SL Paper 2 are Bonding, structure and materials (68), Matter, amounts and stoichiometry (68) and Organic chemistry and molecular analysis (48), out of 179 past-paper questions from 2016-2026. These are archive counts, not a prediction, and a question can carry more than one topic.

Are the IB Chemistry SL Paper 2 questions free?

70 of the 179 IB Chemistry SL Paper 2 questions are free to practise. The other 109 need a plan for IB Chemistry SL, from $6 a month.

Do the IB Chemistry SL Paper 2 questions have answers?

Yes. Each IB Chemistry SL Paper 2 question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.