IGCSE Physics 0625 notes › Waves › Cheat sheet

Waves cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

Waves

IGCSE PHYSICS 0625 · Extended
pastpaperprep.com/revision-notes

3.1General properties of waves

A wave transfers energy from place to place without transferring matter.LEARN
Transverse: vibration at 90∘90^\circ to the direction the wave moves (electromagnetic radiation, water waves, S-waves). Longitudinal: vibration parallel to it (sound, P-waves).LEARN
Amplitude: rest position to crest. Wavelength λ\lambda: crest to the next crest. Frequency ff: waves passing a point per second, in Hz. Neighbouring wavefronts are one wavelength apart.LEARN
v=fλv = f\lambdaLEARN
Ripple tank: a flat barrier shows reflection; a shallow region met at an angle shows refraction (slower, shorter wavelength, same frequency); a gap or an edge shows diffraction (same wavelength).LEARN
Diffraction through a gap is greatest when the gap is about one wavelength wide. For a gap wider than the wavelength, a narrower gap or a longer wavelength gives more spreading. Longer wavelengths bend further round an edge.LEARN

3.2.1Reflection of light

Normal: a line at 90∘90^\circ to the surface where the ray hits it. The angles of incidence and reflection are measured from the normal, not from the mirror.LEARN
Law of reflection: angle of incidence = angle of reflection, i=ri = r.LEARN
Plane mirror image: same size as the object; image-to-mirror distance = object-to-mirror distance; virtual. It is upright, with left and right swapped.LEARN
Virtual image: rays only appear to come from it, so it cannot be formed on a screen.LEARN
Plane mirror construction: the image is on the line from the object at 90∘90^\circ to the mirror, as far behind as the object is in front. A ray reaches an eye by reflecting where the line from the image to the eye crosses the mirror.LEARN

3.2.2Refraction of light

Normal: a line at 90∘90^\circ to the surface where the ray meets it. The angles of incidence and refraction are measured from the normal, never from the surface.LEARN
Into a material where light is slower (air into glass): bends towards the normal. Into one where it is faster (glass into air): bends away. Along the normal: no change of direction. The frequency never changes.LEARN
Critical angle: the angle of incidence, for light going into a material where it is faster, at which the angle of refraction is 90∘90^\circ.LEARN
Total internal reflection: light heading into a material where it would be faster is all reflected back when its angle of incidence is greater than the critical angle. Examples: prism periscopes and binoculars, sparkling diamonds.LEARN
n=speed in airspeed in the material(refractive index, no unit)n = \frac{\text{speed in air}}{\text{speed in the material}} \quad \text{(refractive index, no unit)}LEARN
n=sin⁡isin⁡r(i in air, r in the material)n = \frac{\sin i}{\sin r} \quad \text{(}i\text{ in air, }r\text{ in the material)}LEARN
n=1sin⁡c(c: critical angle, material to air)n = \frac{1}{\sin c} \quad \text{(}c\text{: critical angle, material to air)}LEARN
Optical fibres keep light inside by total internal reflection. In telecommunications they carry more information than copper cables, with less loss and no electrical interference.LEARN

3.2.3Thin lenses

Converging lens: rays parallel to the principal axis meet at the principal focus F. Diverging lens: they spread out as if from F on the incoming side.LEARN
Principal axis: the line through the centre of a lens at 90∘90^\circ to it. Focal length ff: the distance from the centre of the lens to F.LEARN
Ray rules for a converging lens: parallel to the axis → through F beyond the lens; through the middle → straight on; through F on the object's side → parallel to the axis.LEARN
Describe an image with one word from each pair: enlarged, same size or diminished; upright or inverted; real or virtual.LEARN
Real image: rays actually meet, so a screen can show it. Virtual image: spreading rays only seem to come from it, so no screen can.LEARN
Magnifying glass: a converging lens with the object closer than F gives a virtual, upright, enlarged image.LEARN
Short sight (distant objects focus in front of the retina): diverging lens. Long sight (near objects focus behind the retina): converging lens.LEARN

3.2.4Dispersion of light

Dispersion: a glass prism splits white light into its colours, because the glass refracts each colour through a different angle. Violet is refracted most, red least.LEARN
The visible spectrum, in order: red, orange, yellow, green, blue, indigo, violet (Richard Of York Gave Battle In Vain).LEARN
From red to violet, wavelength decreases and frequency increases. Red: longest wavelength, lowest frequency. Violet: shortest wavelength, highest frequency.LEARN
Monochromatic light has a single frequency (one colour). A prism refracts it but cannot split it.LEARN

3.3Electromagnetic spectrum

The spectrum by increasing frequency (decreasing wavelength): radio waves, microwaves and infrared; then visible light; then ultraviolet, X-rays and gamma rays.LEARN
In a vacuum, all electromagnetic waves move at one and the same speed. So a higher frequency means a shorter wavelength.LEARN
Speed of electromagnetic waves in a vacuum: 3.0×108 m/s3.0 \times 10^8\ \text{m/s}, and almost exactly the same in air.LEARN
Uses: radio (broadcasts, astronomy, RFID); microwaves (satellite TV, mobile phones, ovens); infrared (grills, remote controls, intruder alarms, thermal imaging, optical fibres); visible (vision, photography, lighting); ultraviolet (security marking, detecting fake notes, sterilising water); X-rays (medical and security scanning); gamma (sterilising food and equipment, detecting and treating cancer).LEARN
Harm from too much exposure: microwaves heat body cells internally; infrared burns skin; ultraviolet damages skin and eye cells (skin cancer, eye conditions); X-rays and gamma rays damage cells or cause mutations.LEARN
Satellites communicate mainly by microwaves. Satellite TV and some satellite phones use geostationary satellites; some satellite phones use low orbit satellites.LEARN
Phones and Wi-Fi: microwaves (pass through some walls, short aerial). Bluetooth: radio waves (pass through walls, weakened). Optical fibres: visible light or infrared (glass is transparent to them, high data rates).LEARN
Analogue signals vary continuously; digital signals have only two values, 1 and 0. Digital gives a higher data rate, and a greater range because it can be regenerated accurately.LEARN

3.4Sound

Sound is made by vibrating objects. It travels as a longitudinal wave: the particles of the medium vibrate backwards and forwards, parallel to the direction the sound travels.LEARN
Sound needs a medium (a solid, liquid or gas). It cannot travel through a vacuum.LEARN
Humans hear about 20 Hz20\ \text{Hz} to 20 000 Hz20\,000\ \text{Hz}. Ultrasound is sound with a frequency above 20 kHz20\ \text{kHz}.LEARN
A higher frequency gives a higher pitch. For the same note, a larger amplitude gives a louder sound.LEARN
Sound travels through air at about 330330–350 m/s350\ \text{m/s}. To measure the speed, time a sound over a large measured distance, repeat, and divide the distance by the average time.LEARN
An echo is sound reflected from a surface. When the source and the listener are in the same place, the echo travels to the surface and back: twice the distance to the surface.LEARN
Compression: particles closer together, pressure higher than normal. Rarefaction: particles further apart, pressure lower than normal. In general, sound is fastest in solids, slower in liquids and slowest in gases.LEARN
Ultrasound echoes are used in sonar, non-destructive testing of materials and medical scanning of soft tissue. Depth or distance == speed ×\times echo time ÷2\div 2, where the echo time runs from sending the pulse to receiving its echo.LEARN

Which method when

'Calculate the speed, frequency or wavelength of a wave' → v=fλv = f\lambda, rearranged, after converting cm to m and kHz or MHz to Hz; frequency from a count is waves passing ÷ time in s; across nn neighbouring wavefronts, λ\lambda = measured span ÷ (n−1)(n - 1) (3.1)LEARN
'Waves pass into shallow water' or 'light enters glass': what changes? → the frequency stays the same, because the source sets it; the speed and the wavelength both fall; the direction changes only if the waves meet the boundary at an angle (3.1, 3.2.2)LEARN
Plane-mirror angles and distances → measure angles from the normal, so a ray at x∘x^\circ to the mirror has i=90∘−xi = 90^\circ - x, then r=ir = i; the image is as far behind the mirror as the object is in front, so object to image is twice object to mirror (3.2.1)LEARN
'Does the ray leave the glass or reflect back?' → total internal reflection only if the light is heading into a material where it is faster (glass or water into air) and its angle of incidence is greater than the critical angle; below the critical angle most of it refracts out, bending away from the normal (3.2.2)LEARN
'Find the position and size of the image' for an object further from a converging lens than F → scale ray diagram: from the object's tip, a ray parallel to the axis bends through F on the far side, and a ray through the centre goes straight on; the image tip is where they cross; convert back with the scale (3.2.3)LEARN
'Calculate the speed of sound' or 'how far away is the cliff?' → v=stv = \dfrac{s}{t}, timing over a large distance and averaging repeats; an echo goes to the surface and back, so with the source and listener together, distance to the surface = speed × time from sound to echo ÷ 2 (3.4)LEARN

◆Which method when

'Which change makes the waves spread out more beyond the gap?' → compare the gap with the wavelength: spreading is greatest when the gap is about one wavelength wide; for a gap wider than the wavelength, a narrower gap or a longer wavelength gives more spreading; amplitude has no effect (3.1)LEARN
'Construct the image' or 'draw the ray that reaches the eye' for a plane mirror → rule a line from the object at 90∘90^\circ to the mirror and mark the image the same distance behind; join image to eye, and the ray reflects where that line crosses the mirror (3.2.1)LEARN
'Calculate the refractive index or the critical angle' → n=sin⁡isin⁡rn = \dfrac{\sin i}{\sin r} with ii in air and both angles from the normal, or nn = speed in air ÷ speed in the material; then sin⁡c=1n\sin c = \dfrac{1}{n} for light going from the material into air (3.2.2)LEARN
'Object closer to a converging lens than F' or 'how is the lens used as a magnifying glass?' → draw the same two rays, then extend them backwards as dashed lines; they cross on the object's side at a virtual, upright, enlarged image (3.2.3)LEARN
'Find the wavelength or frequency of an electromagnetic wave' with no speed given → recall 3.0×108 m/s3.0 \times 10^8\ \text{m/s} in a vacuum or air, then v=fλv = f\lambda; dividing by 10−710^{-7} is multiplying by 10710^{7} (3.3)LEARN
Follows the Cambridge IGCSE Physics 0625 syllabus (2026 to 2028). Not affiliated with Cambridge.