Thin lenses
In a minute
A brings rays together; a spreads them apart. Learn the lens terms, ray diagrams and how to describe an image. Extended adds the and glasses.
You'll be able to
- Describe what a thin converging lens and a thin diverging lens do to a parallel beam, using the terms , and .
- Draw a ray diagram for the formed by a converging lens, and use it to find where the image is and how big it is.
- Describe any image as enlarged, same size or diminished; upright or inverted; and real or virtual.
- Explain how a forms and why it never appears on a screen.
- Draw a ray diagram for the virtual image formed by a converging lens, and describe how one lens works as a magnifying glass.
- Describe how a converging lens corrects long sight and a diverging lens corrects short sight.
Before you start2 quick questions on what this builds on
Revise first: 3.1 General properties of waves, 3.2.1 Reflection of light and 3.2.2 Refraction of light
Lenses and a parallel beam
A lens is curved glass or clear plastic. Light changes speed as it enters and leaves, so a ray meeting the surface at an angle changes direction: . For a thin lens, draw each ray bending once, at the centre line.
A is thicker in the middle than at the edges. A is thinner in the middle.
A beam parallel to the bends towards the axis in a converging lens. Every ray passes through one point, the F, then spreads out again. A diverging lens bends the rays away from the axis. Traced back (dashed), they seem to come from F on the side the light came from.
has the symbol , in or . A lens has a principal focus on each side, both from the centre.
Try it first, then reveal one step at a time.
- Say why the rays change direction, which way they bend, where they meet and what happens after that point.
- The rays refract as they enter and leave the lens. Each ray bends towards the principal axis, so the beam converges. All the rays pass through one point on the principal axis, called the principal focus. Beyond the principal focus the rays spread apart again.
Try it first, then reveal one step at a time.
- Rays from the distant window reach the lens almost parallel, so they are focused at the principal focus.
- So the screen is at F, and the focal length is the distance from the centre of the lens to the screen.
- This is an estimate: the window is not infinitely far away, so its image is very slightly beyond F.
Ray diagrams and describing images
When the object is further from a converging lens than F, the lens brings the rays from one point of the object together again at one point of the image. So two rays from the object's tip find the image's tip. Three are easy to draw:
1. A ray parallel to the principal axis bends through F on the far side.
2. A ray through the middle of the lens goes straight on.
3. A ray through F on the object's side leaves parallel to the axis.
Stand the object on the axis as an upright arrow. Rule two rays from its tip, with arrows, until they cross. The image is an arrow from the axis to the crossing point. For large distances, draw to scale and convert your measurements back.
Try it first, then reveal one step at a time.
- Choose a scale: on the drawing represents . So F is from the lens on the drawing, the object is from the lens and tall.
- From the tip of the object, rule a ray parallel to the axis that bends through F on the far side, and a second ray through the middle of the lens, which does not bend.
- The rays cross beyond the lens on the drawing, below the axis.
- Convert with the scale: image height , and image distance .
- Check: the object is beyond (), so the image should be diminished. It is.
Describe an image with one word from each pair, comparing it with the object: enlarged, same size or diminished; upright or inverted; real or virtual.
A from one converging lens is always inverted. A forms when rays leave a lens or mirror spreading apart. Traced back (dashed), they seem to come from one point. No light reaches it, so a screen there shows nothing. A diverging lens on its own always gives a virtual image.
For a converging lens, the image depends on the object's position (2F is twice the focal length from the lens):
Very far away: image at F; real, inverted, diminished.
Beyond 2F: image between F and 2F; real, inverted, diminished.
At 2F: image at 2F; real, inverted, same size.
Between F and 2F: image beyond 2F; real, inverted, enlarged.
At F: the rays leave parallel, so no image forms.
Between F and the lens: image on the object's side; virtual, upright, enlarged.
Try it first, then reveal one step at a time.
- Use one word from each pair, and back up "real" with what the rays do.
- The image is real, because it is formed on the wall, so rays of light actually meet there. It is inverted, because a real image formed by one converging lens is upside down. It is enlarged, because the picture is bigger than the slide.
Virtual images and the magnifying glass Extended only
With the object closer than F, the rays leave a converging lens still spreading apart. Draw two rays from the tip as before, then extend them backwards as dashed lines. They cross on the object's side, at the tip of the virtual image.
Try it first, then reveal one step at a time.
- The object is nearer the lens than F is, so expect a virtual image.
- From the tip, rule a ray parallel to the axis that bends through F on the far side, and one through the middle, which does not bend. They spread apart after the lens.
- Extend both rays backwards as dashed lines. They cross on the object's side, about from the lens and about above the axis.
- The image is virtual (the rays only seem to come from it), upright and enlarged.
This is how a works.
Try it first, then reveal one step at a time.
- Say which kind of lens, where the ring goes, where the eye goes, and use one word from each image pair.
- The jeweller uses a converging lens, with the ring nearer to the lens than F, so its distance from the lens is less than the focal length. The jeweller looks through the lens from the other side. The rays leaving the lens diverge, so they seem to come from further away. The image is virtual, upright and enlarged.
Correcting short and long sight Extended only
Your eye's converging lens focuses light onto the retina at the back of the eye. You see clearly only when the image lands on the retina.
: distant objects look blurred. The eye bends light too much, so their rays meet in front of the retina. A diverging lens in front of the eye spreads the rays slightly, so the eye focuses them on the retina.
: near objects look blurred. The eye does not bend light enough, so their rays would meet behind the retina. A converging lens in front of the eye converges the rays first, so the eye focuses them on the retina.
Try it first, then reveal one step at a time.
- Distant objects are blurred, so start from where her eye focuses rays from a distant object.
- Amira is short-sighted. Her eye focuses rays from a distant object in front of the retina, so the image on the retina is blurred. A diverging lens in front of her eye corrects this. It spreads the rays out slightly before they enter the eye. Her eye then brings them to a focus on the retina, so she sees the bus number clearly.
Common mistakes
- Treating the lens-to-image distance as the focal length. They are equal only for a very distant object.
- Calling an image on a screen virtual or upright. Rays really meet there, so it is real and, from one converging lens, inverted.
- Drawing a real image arrow pointing up or floating off the axis. For an upright object on the axis, it points down from the axis.
- Saying "diminished" for an object between F and 2F. With a converging lens, only an object beyond 2F gives a diminished real image.
Exam tips
- Ray diagrams: use a ruler, add arrows in the direction of the light, and continue each ray until it meets the other. Draw virtual rays and images dashed.
- Describe an image with all three words (size, which way up, real or virtual); leaving one out can lose a mark.
- Practical (Paper 5 or 6): estimate by focusing a distant object onto a screen and measuring from the centre of the lens to the screen.
Key takeaways
Practise this
59 past-paper questions on Thin lenses in the 0625 Extended bank, each with a mark scheme and a worked explanation.