Dispersion of light
In a minute
A glass prism spreads white light out into a band of colours: this is . Learn why it happens and the order of the seven colours of the by and by . Extended adds light.
You'll be able to
- Describe how a glass prism spreads white light into a spectrum, and explain why each colour bends by a different amount.
- List the seven colours of the spectrum in their order, and rank colours by wavelength and by frequency.
- Recall what monochromatic light is, and what a prism does to it.
Before you start2 quick questions on what this builds on
Revise first: 3.1 General properties of waves and 3.2.2 Refraction of light
Splitting white light with a prism
White light, such as sunlight, is not one colour. It is a mixture of many colours.
A prism is a block of glass with triangular ends. Shine a narrow beam of white light into one face. A band of colours comes out of another face and shows on a screen, with red at one end and violet at the other.
Each colour travels at a different speed in glass. Violet slows down the most and red the least. So the glass each colour through a different angle.
At the first face the light slows down and bends towards the . Violet bends most, so the colours start to separate. At the second face the light speeds up and bends away from the normal, and the colours spread further apart.
In the usual set-up, both faces bend the light towards the thick base of the prism. With the point of the prism at the top, red lands highest on the screen and violet lowest.
Try it first, then reveal one step at a time.
- Say what you see, what white light is made of, why the colours separate, which colour bends most and least, and name the effect.
- A band of colours, a spectrum from red to violet, appears on the card. White light is a mixture of colours. Each colour travels at a different speed in glass, so each colour is refracted through a different angle. Violet is refracted the most and red the least. The colours separate at the first face and spread further at the second face. The effect is called dispersion.
The seven colours in order
The colours of the always come in the same order. Seven are named traditionally: red, orange, yellow, green, blue, indigo, violet.
To remember the order, use "Richard Of York Gave Battle In Vain". The first letters are R, O, Y, G, B, I, V.
Each colour is light of a different and . The wavelength is longest at the red end and shortest at the violet end.
In a vacuum every colour travels at the same speed, and in air almost exactly the same. With and the same , a longer wavelength means a lower frequency. So red has the lowest frequency and violet the highest.
Increasing frequency (decreasing wavelength): red, orange, yellow, green, blue, indigo, violet.
Increasing wavelength (decreasing frequency): violet, indigo, blue, green, yellow, orange, red.
This links to the prism: violet, with the highest frequency and shortest wavelength, is refracted the most. Red is refracted the least.
Try it first, then reveal one step at a time.
- Write out the spectrum: red, orange, yellow, green, blue, indigo, violet.
- Frequency increases from the red end to the violet end, so keep that order.
- Pick out the four colours as they appear.
- Frequency increases from the red end of the spectrum to the violet end. So in order of increasing frequency the colours are orange, yellow, blue, violet.
Try it first, then reveal one step at a time.
- Both colours travel at the same speed in air, so use with the same .
- Green light has the higher frequency. Both colours travel at the same speed in air. Since , frequency is speed divided by wavelength. So the colour with the shorter wavelength, green, has the higher frequency.
Monochromatic light Extended only
Light with just one frequency is . One frequency means one colour. A laser gives light that is very nearly monochromatic.
A prism still refracts monochromatic light at each face. But there are no other colours to separate, so one ray goes in and one ray comes out.
So if a prism splits a beam into two or more colours, the beam was not monochromatic.
Try it first, then reveal one step at a time.
- Ask what would happen if the beam held more than one frequency.
- The laser light is monochromatic. It has a single frequency, so it is one colour. The prism refracts it at each face, so the ray changes direction. There are no other colours to separate, so no spectrum forms.
Common mistakes
- Drawing the spectrum upside down. Violet bends most and red least, so with the prism point-up, red is at the top of the screen and violet at the bottom.
- Naming the effect diffraction or reflection. The colours separate by refraction, and the splitting is called dispersion.
- Stopping the rays inside the prism, or splitting them only at the second face. The colours start to separate at the first face; continue every ray to the screen.
- Giving red the highest frequency. Red has the longest wavelength, so it has the lowest frequency; violet has the highest.
Exam tips
- "Describe" dispersion (Paper 3/4): say white light is a mixture of colours, that the glass refracts each colour through a different angle (violet most, red least), and name the effect dispersion.
- Paper 1/2 order questions: write R O Y G B I V in the margin and mark the long-wavelength, low-frequency end before you read the options.
- Practical (Paper 5/6): use a narrow beam from a ray box in a darkened room, so the spectrum on the white screen is clear enough to see every colour.
Key takeaways
Practise this
19 past-paper questions on Dispersion of light in the 0625 Extended bank, each with a mark scheme and a worked explanation.