Sound
In a minute
Every sound starts with something vibrating. The vibration travels through a solid, liquid or gas as a , so sound cannot cross a . sets the and sets the . You'll also measure the of sound and use .
You'll be able to
- Describe how a vibrating object makes sound, and why sound is a longitudinal wave that needs a medium to travel through.
- State the range of frequencies humans can hear, and define .
- Describe how changing the amplitude or frequency changes the loudness or pitch of a sound.
- Recall the speed of sound in air and describe how to measure it from a and a time.
- Describe an echo as sound reflected from a surface.
- Describe and , and compare the speed of sound in solids, liquids and gases.
- Describe how ultrasound is used in , testing materials and scanning soft tissue, and calculate a depth or distance from an echo time.
Before you start3 quick questions on what this builds on
Revise first: 1.1 Physical quantities and measurement techniques, 1.2 Motion, 2.3.3 Radiation and 3.1 General properties of waves
How sound is made and how it travels
Pluck a guitar string and it blurs: it is vibrating. Every sound starts with something vibrating, such as a string, a drum skin, a loudspeaker cone or your vocal cords.
As a loudspeaker cone moves forwards, it pushes the air particles in front of it closer together. As it moves back, it leaves them more room. Each layer of particles pushes on the next, so the vibration is passed on through the air.
The air particles vibrate backwards and forwards, parallel to the direction the sound travels. So sound is a longitudinal wave. The particles stay in about the same place; only the energy moves on.
A region where the particles are pushed close together is a compression. The air pressure there is higher than normal. A region where the particles are spread apart is a rarefaction, where the pressure is lower than normal. As the wave passes, each bit of air becomes a compression, then a rarefaction, over and over.
Sound needs a medium: a solid, a liquid or a gas, whose particles can pass the vibration on. A vacuum has no particles, so sound cannot travel through it. Light needs no medium, which is why you can see the Sun but never hear it.
Try it first, then reveal one step at a time.
- Say how the sound reaches you, what removing the air changes, and why you can still see the bell.
- The bell vibrates and makes the air particles next to it vibrate. The sound is passed on by particles of a medium pushing on their neighbours. As the pump removes air, there are fewer particles to carry the vibrations, so the sound gets fainter. With almost no air left, the jar is close to a vacuum, and sound cannot travel through a vacuum. Light does not need a medium, so you can still see the bell.
In general, sound travels fastest in solids, more slowly in liquids and slowest in gases. Typical speeds are about in steel, in water and in air.
Pitch, loudness and the range you can hear
A young person with normal hearing can hear frequencies from about to (). The top of the range drops as people get older.
Ultrasound is still sound: a longitudinal wave that needs a medium. In the same medium it travels at the same speed as sound you can hear. Only its frequency is higher, so its is shorter.
Pitch is how high or low a note sounds. A higher frequency gives a higher pitch. Loudness depends on amplitude: a larger amplitude gives a louder sound, because the wave carries more energy.
A microphone connected to an oscilloscope shows a sound as a wave on a screen, drawn against time. The height of the trace shows the amplitude. With the same time setting, the number of complete waves across the screen shows the frequency: more waves means a higher frequency and a shorter .
Try it first, then reveal one step at a time.
- Compare the number of waves for frequency and pitch, then the height for amplitude and loudness. Mention both sounds in each point.
- Y shows more complete waves in the same time, so Y has a higher frequency than X. This means Y has a higher pitch. Y's trace is half as tall, so it has a smaller amplitude than X. This means Y is quieter than X.
Try it first, then reveal one step at a time.
- is above , so the calls are ultrasound: you cannot hear them. They still travel at the speed of sound in air.
- Convert the frequency: .
- Rearrange for the wavelength: .
- Substitute: .
- Give 2 significant figures, as in the data.
Measuring the speed of sound
Learn this: sound travels through air at about to . Light travels almost a million times faster. That is why you see a lightning flash before you hear the thunder.
To measure the speed of sound, time a sound over a measured distance. Then use speed = distance ÷ time, , from 1.2.
1. Two people stand a few hundred metres apart in an open space. Measure the distance between them with a trundle wheel or a long tape measure.
2. One person makes a loud sound you can also see being made: for example, banging two wooden blocks together above their head.
3. The other starts a stopwatch on seeing the blocks meet and stops it on hearing the bang. Light arrives almost instantly, so this is the time the sound took.
4. Repeat several times and find the average time. Then divide the distance by the average time.
The distance must be large. Then the time is long compared with your reaction time (about ), so reaction time causes a smaller error.
Try it first, then reveal one step at a time.
- Average time: . Keep the full value.
- Write the equation: .
- Substitute: .
- Give 3 significant figures, as in the data. The answer is inside –, so it is sensible.
Try it first, then reveal one step at a time.
- Say how the distance is measured, when the stopwatch starts and stops, how to make the time reliable, and how to work out the speed.
- Use the trundle wheel to measure a distance of about between the two students. One student fires the starting pistol. The other starts the stopwatch on seeing the smoke and stops it on hearing the bang. Repeat this several times and calculate the average time. The speed of sound is the distance divided by the average time.
Echoes
An echo is sound that has reflected off a surface, such as a wall or a cliff. Hard, flat surfaces reflect sound best. You hear the echo a moment after the original sound.
The sound travels to the surface and back again. So an echo travels twice the distance from you to the surface.
This gives a second way to measure the speed of sound. Stand a measured distance from a large wall, make a sharp sound, and time the echo. Then speed = (2 × distance to the wall) ÷ time.
Try it first, then reveal one step at a time.
- The sound goes to the cliff and back: distance travelled .
- Write the equation: .
- Substitute: .
- Give 3 significant figures, as in the data.
Using ultrasound echoes Extended only
Each use of ultrasound sends a short pulse into a material and times the echo from a boundary. Because the wavelength is short, the echoes can show small details.
1. Sonar: a ship sends pulses down to the seabed or to a shoal of fish. The echo time gives the depth or distance.
2. Non-destructive testing: a probe sends ultrasound into a metal part, such as a rail or an aircraft wing. A crack inside reflects part of the pulse back early, so the flaw is found without cutting the part open.
3. Medical scanning of soft tissue: some ultrasound reflects at each boundary between different tissues, such as the edge of an organ or of an unborn baby. A computer builds an image from the echoes. Ultrasound is not ionising, so it is safe for scanning an unborn baby.
Divide by 2 because the echo time covers the trip there and back.
Try it first, then reveal one step at a time.
- Distance there and back: .
- The pulse went down and back up, so halve it: .
- Give 3 significant figures, as in the data.
Try it first, then reveal one step at a time.
- The earlier echo comes from a crack inside the rail.
- Find the speed from the bottom echo: .
- Depth of the crack: .
- Give 2 significant figures, as in the times.
Common mistakes
- Forgetting that an echo goes there and back. With the source and listener in the same place, halve the total distance the sound travels to get the distance to the surface.
- Linking loudness to frequency. Amplitude sets the loudness; frequency sets the pitch.
- Thinking ultrasound travels faster or slower than audible sound. In the same medium all sound travels at the same speed; ultrasound just has a higher frequency.
- Using a frequency in kHz as if it were in Hz. Multiply by 1000 first, or a wavelength comes out 1000 times too big.
- Describing a speed-of-sound experiment without saying how the distance and the time are measured, or timing only once.
Exam tips
- "Describe" a method for the speed of sound: name what measures the distance, say exactly when the stopwatch starts and stops, repeat and average, then give speed = distance ÷ average time.
- "State" the range of human hearing with its units: to . A range with no unit loses the mark.
- "Calculate" a distance from an echo: write distance = speed × time, substitute, then halve it, and say why you halved.
Key takeaways
Practise this
86 past-paper questions on Sound in the 0625 Extended bank, each with a mark scheme and a worked explanation.