2.3.3 · CorePaper 1Paper 2Paper 3Paper 4

Radiation

Builds on 2.1.2 Particle model and 2.3.1 Conduction28 min read

In a minute

is infrared radiation. Every object gives it out, and it needs no medium, so it can cross the empty space between the Sun and the Earth. Dull black surfaces absorb and emit it best; shiny white or silvery surfaces reflect it best.

You'll be able to

  • Know that thermal radiation is infrared, that every object emits it, and that it can travel through a .
  • Describe how the colour and texture of a surface change how well it absorbs, emits and reflects infrared.
  • Describe experiments that compare surfaces as and as of infrared.
  • Describe how surface and surface area change the rate of emission.
  • Explain when an object's temperature rises, falls or stays constant, and use this to explain what controls the Earth's temperature.
Before you start3 quick questions on what this builds on
Check yourself
A mug of hot cocoa and a glass of cold milk sit side by side. How do the particles in the cocoa compare with those in the milk?
Check yourself
Why can thermal energy not be transferred by across a completely empty space?
Check yourself
Which of these is a good ?

Revise first: 2.1.2 Particle model and 2.3.1 Conduction

Thermal radiation: infrared that needs no medium

Stand in sunshine on a cold, still day. The air around you is cold, yet your face feels warm. The energy reaches you as .

Infrared is part of the electromagnetic spectrum, just beyond red light. You cannot see it, but your skin feels it as warmth. You meet the whole spectrum in 3.3.

Every object emits infrared, not just hot ones. A radiator, your body and even an ice cube all give it out. The hotter an object is, the more infrared it gives out.

Conduction and need particles to carry the energy. Radiation does not: it needs no medium. It can cross a , a space with no particles at all.

Space between the Sun and the Earth is almost a vacuum. So the Sun's energy reaches us by radiation only. Radiation also travels through air, and the Sun's radiation passes through transparent materials such as glass.

Worked exampleAn astronaut on a spacewalk feels the Sun warm her gloves. Explain why this energy can reach her by radiation, but not by conduction or convection.

Try it first, then reveal one step at a time.

  1. Say what space contains, then what conduction and convection need.
Check yourself
Which objects emit infrared radiation?
Check yourself
In an old-style light bulb, a very hot filament sits inside a glass bulb with almost all the air removed. How does thermal energy travel from the filament to the glass?

Black or white, dull or shiny

On a sunny day, a black car gets much hotter inside than an identical white one. The colour of a surface changes what happens to the infrared that falls on it.

When infrared reaches an opaque surface, some is absorbed and the rest is reflected. A good takes in most of it. A good reflector bounces most of it away.

1. Dull (matt) black surfaces are the best absorbers and the worst reflectors.

2. Shiny white or silvery surfaces are the best reflectors and the worst absorbers.

3. A good absorber is also a good . At the same temperature, a dull black surface emits infrared fastest and a shiny silvery or white one slowest.

Two surfaces with infrared falling on them. On the left, a dull black surface: three infrared arrows hit it and only one short dashed arrow bounces off, labelled absorbs most of the infrared, reflects very little. On the right, a shiny white surface: three infrared arrows hit it and three arrows of the same length bounce off, labelled reflects most of the infrared, absorbs very little. infrared falls on the surfacedull black surfaceabsorbs most of the infrared,reflects very littleinfrared inreflectedshiny white surfacereflects most of the infrared,absorbs very little
Dull black absorbs most of the infrared; shiny white reflects most of it.

Colour and texture both count. Black beats white, and dull beats shiny, at absorbing and at emitting. So a shiny black or a dull white surface comes in between.

Worked exampleTwo identical plastic bottles of cold water are left in sunshine. One is painted dull black and the other white. Explain which bottle's water warms up faster.

Try it first, then reveal one step at a time.

  1. The bottles are gaining energy, so compare how well each surface absorbs.
Worked exampleAfter a marathon, runners are wrapped in thin, shiny silver blankets. Explain how the blanket helps to keep a runner warm.

Try it first, then reveal one step at a time.

  1. The runner's body emits infrared. Say what the shiny surface does to it.
Check yourself
You want a metal flask of hot soup to stay hot for as long as possible. Which outer surface is best?
Check yourself
Two identical mugs of tea are at the same temperature. One mug is dull black and the other is shiny white. Which statement is correct?

Experiments: comparing emitters and absorbers Extended only

To compare surfaces fairly, change only the surface. Keep the temperature, the size and the distance to the detector or heater the same.

To compare emitters, use a Leslie cube: a hollow metal cube whose four sides have different surfaces, such as dull black, shiny black, dull white and shiny silver.

1. Fill the cube with very hot water, so all four sides are at the same temperature.

2. Place an infrared detector a fixed distance from one side and record its reading.

3. Turn the cube so each side faces the detector in turn, at the same distance. Take the readings quickly, before the water cools much.

A Leslie cube seen from above: a hollow metal cube full of very hot water, with four different sides: dull black, shiny black, dull white and shiny silver. The dull black side faces an infrared detector, and arrows show infrared travelling from that side to the detector. A marked distance between the side and the detector is labelled same distance for each side. A note says turn the cube so each side faces the detector in turn. very hot water(seen from above)shiny blackshiny silverdull whitedull blackinfrared detectorinfraredsame distance for each sideTurn the cube so each side faces the detector in turn.
Each side of the cube is at the same temperature, so only the surface changes.

The dull black side gives the highest reading and the shiny silver side the lowest. So dull black is the best emitter. Without a detector, you can compare how fast hot water cools in two identical cans with different surfaces.

To compare absorbers, stick a drawing pin to the back of two metal plates with a small blob of wax. One plate is dull black and the other shiny silver.

Stand the plates facing a radiant heater, the same distance away on either side. Switch on and watch the pins. The wax on the dull black plate melts first, so its pin drops first: dull black is the better absorber.

A radiant heater stands in the middle, with arrows of infrared going out to the left and to the right. On the left is a dull black plate and on the right a shiny silver plate, each the same distance from the heater. On the back of each plate, facing away from the heater, a drawing pin is held on by a blob of wax. radiant heaterdull black plateshiny silver plateinfraredinfraredwaxdrawing pinwaxdrawing pinsame distancesame distance
The pin on the better absorber falls first.
Worked exampleDescribe an experiment to show that a dull black surface is a better emitter of infrared radiation than a shiny silver surface. Say what you measure and what you expect.

Try it first, then reveal one step at a time.

  1. Say what you set up, keeping everything the same except the surface.
Worked exampleIn the plates experiment, the pin on the dull black plate falls first. Explain this result, and why both plates must be the same distance from the heater.

Try it first, then reveal one step at a time.

  1. The plates are gaining energy, so this is about absorbing.
Check yourself
A Leslie cube full of very hot water has sides that are dull black, shiny black, dull white and shiny silver. Which side gives the lowest reading on an infrared detector at the same distance?
Check yourself
Why must the detector be the same distance from each side of the Leslie cube?

Rate of emission, energy balance and the Earth Extended only

Besides its surface, two things change how fast an object emits radiation:

1. Surface temperature: a hotter surface emits at a greater rate.

2. Surface area: a larger surface emits at a greater rate, as more of it is giving out radiation.

An object is always gaining energy from its surroundings and losing energy to them. Comparing the two rates tells you what its temperature does, as long as it is not changing state:

1. Gaining energy faster than it loses it: the temperature rises.

2. Losing energy faster than it gains it: the temperature falls.

3. Gaining and losing energy at the same rate: the temperature stays constant.

This balance sets itself up. A cool object in sunshine absorbs faster than it emits, so it warms. As it warms, it emits faster. Its temperature stops rising once it loses energy as fast as it gains it.

Worked exampleA metal sheet is left in strong sunshine. Its temperature rises for a while, then stops rising, although the Sun still shines on it. Explain why.

Try it first, then reveal one step at a time.

  1. Compare the rate of gaining energy with the rate of losing it, first at the start and then later.

The whole Earth follows the same rule:

1. Radiation from the Sun, mostly visible light and infrared, reaches the Earth. Clouds, ice and snow reflect some of it straight back to space.

2. The surface absorbs most of the rest, warms up and emits infrared.

3. Greenhouse gases in the atmosphere, such as carbon dioxide, methane and water vapour, absorb some of this infrared and send some back towards the surface. This keeps the surface warmer than it would otherwise be.

The Sun at the top left sends radiation down to the Earth's surface. A dashed arrow shows some of it reflected back to space by ice, snow and clouds. The surface emits infrared upwards. One arrow passes through the atmosphere and escapes to space. Another arrow is absorbed by greenhouse gases in the atmosphere, and an arrow from the atmosphere points back down to the surface, labelled some absorbed and sent back to the surface. Sunradiation fromthe Sunsome reflectedback to space(ice, snow, clouds)infrared emitted bythe surface escapesatmosphere withgreenhouse gasessome absorbedand sent backto the surfaceEarth's surface
The Earth's temperature is steady when it radiates energy to space as fast as it absorbs energy from the Sun.

The Earth's average temperature stays steady when it radiates energy to space at the same rate as it absorbs energy from the Sun. Anything that changes either rate changes the temperature.

Worked exampleThe amount of carbon dioxide in the atmosphere increases. Explain how this affects the Earth's temperature.

Try it first, then reveal one step at a time.

  1. Say what carbon dioxide does to the infrared emitted by the surface.
Check yourself
A hot potato on a plate transfers energy away faster than it receives energy. What happens to its temperature?
Check yourself
Which change makes a dull black radiator emit thermal radiation at a greater rate?
Check yourself
Large areas of white sea ice melt, leaving dark ocean water. What is the effect on the Earth?

Common mistakes

  • Writing "light" or "sunlight" as the name of the process. Write "radiation" or "infrared radiation".
  • Thinking radiation needs air to travel through. It needs no medium, so it crosses a vacuum.
  • Thinking only hot objects emit infrared. Every object does, even an ice cube.
  • Giving the absorbing reason when something is cooling. A cooling object depends on how well its surface emits; one warming in sunshine depends on how well it absorbs.

Exam tips

  • "State" the method: one word, "radiation", is enough. Don't add conduction or convection for energy crossing space.
  • "Explain" a choice of surface: name the property (good absorber, good reflector, poor emitter) and link it to how fast energy is gained or lost.
  • "Describe an experiment" on emitters or absorbers (Extended): say what you change, what you keep the same, what you measure and what you expect to see.

Key takeaways

Learn thisThermal radiation is infrared radiation. All objects emit it, whatever their temperature.
Learn thisThermal radiation needs no medium, so it can travel through a vacuum. Conduction and convection cannot.
Learn thisDull black surfaces are the best absorbers and the worst reflectors of infrared. Shiny white or silvery surfaces are the best reflectors and the worst absorbers.
Learn thisA good absorber is a good emitter: at the same temperature and surface area, a dull black surface emits infrared fastest and a shiny white or silvery one slowest.
Learn thisCompare emitters with a Leslie cube of very hot water and an infrared detector at a fixed distance. Compare absorbers with wax-and-pin plates the same distance from a heater.
Learn thisFor the same type of surface, the rate of emission is greater at a higher surface temperature (same area) and for a larger surface area (same temperature).
Learn thisAn object's temperature is constant when it loses energy at the same rate as it gains energy. If it is not changing state, its temperature rises when it gains energy faster, and falls when it loses energy faster.
Learn thisThe Earth's temperature is steady when it radiates energy to space as fast as it absorbs energy from the Sun. More greenhouse gases (less infrared escapes) or less ice and snow (less sunlight reflected) make it gain energy faster than it loses it, so it warms until a new balance is reached.

Practise this

22 past-paper questions on Radiation in the 0625 Extended bank, each with a mark scheme and a worked explanation.

Practise Radiation →