2.2.2 · CorePaper 1Paper 2Paper 3Paper 4Paper 5Paper 6

Specific heat capacity

In a minute

When an object gets hotter, its goes up. Extended adds why, in terms of the particles, and : how much each kilogram of a substance needs for each degree it warms, and how to measure it.

You'll be able to

  • Say what happens to an object's internal energy when its rises.
  • Describe a temperature rise in terms of the average of all the particles.
  • Define specific heat capacity and use c=ΔEmΔθc = \frac{\Delta E}{m\Delta\theta} to find cc, the energy, the or the temperature rise.
  • Describe how to find cc for a solid and for a liquid by experiment, and work out cc from the results.
Before you start3 quick questions on what this builds on
Check yourself
A hot cup of tea cools down on a table. What happens to the energy in the tea's internal store?
Check yourself
A beaker holds 350 g350\ \text{g} of water. What is this mass in kilograms?
Check yourself
A 60 W60\ \text{W} heater is switched on for 2.02.0 minutes. How much energy does it transfer?

Revise first: 1.2 Motion, 1.3 Mass and weight, 1.7.1 Energy, 1.7.4 Power and 2.1.2 Particle model

Hotter means more internal energy

Every object is made of particles that are always moving. Its is the total of all its particles: from their movement, plus potential energy from the forces between them.

When the of an object rises, its internal energy increases. This is true however the energy gets in: by heating it, or by doing work on it, such as rubbing or hammering.

The energy is not lost. It goes into the object's internal . When the object cools, its internal energy falls again and the energy passes to the surroundings, so energy is conserved.

Worked exampleA drill bit becomes hot while it drills a hole in a wooden plank. Explain what happens to the internal energy of the drill bit, and where the energy comes from.

Try it first, then reveal one step at a time.

  1. Trace the energy from the drill to the bit, then link the temperature rise to internal energy.

The reverse is not always true: while a substance melts or boils, its internal energy rises with no change in temperature (2.2.3).

Check yourself
An ice pack is taken out of a freezer. It warms from −18 °C-18\ \text{°C} to −5 °C-5\ \text{°C} and is still frozen. What happens to its internal energy?
Check yourself
A cyclist brakes hard and the brake pads get hot. Which energy store of the brake pads increases?
Extended only

Why does internal energy rise with temperature? A higher temperature means the particles move faster on average. In a solid they vibrate faster; in a liquid or gas they move around faster. So the average kinetic energy of all the particles in the object increases.

Extended only

The particles always have a range of speeds, and not every one speeds up. It is the average over all of them that rises.

Extended only
Worked exampleAn iron rod is heated from 15 °C15\ \text{°C} to 70 °C70\ \text{°C}. Describe this temperature rise in terms of the particles in the rod.

Try it first, then reveal one step at a time.

  1. Say how the particles in a solid move, what changes, and that it is an average over all of them.
Extended only
Check yourself
The temperature of the air in a sealed bottle rises. Which statement about the air particles is correct?

Specific heat capacity Extended only

Heat equal masses of water and cooking oil on identical hot plates for the same time. The oil gets much hotter. Each kilogram of water needs more energy for each degree it warms.

Learn this
c=ΔEmΔθc = \frac{\Delta E}{m\Delta\theta}

ΔE\Delta E is the energy transferred, in J. mm is the , in kg. Δθ\Delta\theta is the temperature rise, in °C. So the unit of cc is J/(kg °C)\text{J/(kg °C)}.

To find the energy, rearrange to ΔE=mcΔθ\Delta E = mc\Delta\theta. Water's value is high, about 4200 J/(kg °C)4200\ \text{J/(kg °C)}; a question will give you the value it wants you to use.

The equation only works while the substance stays in the same state. During melting or boiling, energy goes in with no temperature rise.

Worked exampleAn aluminium saucepan of mass 650 g650\ \text{g} is heated from 21 °C21\ \text{°C} to 85 °C85\ \text{°C}. The specific heat capacity of aluminium is 900 J/(kg °C)900\ \text{J/(kg °C)}. Calculate the energy transferred to the saucepan.

Try it first, then reveal one step at a time.

  1. Change the mass to kilograms: 650 g=0.650 kg650\ \text{g} = 0.650\ \text{kg}.
Worked exampleA block of an unknown metal has a mass of 1.2 kg1.2\ \text{kg}. It takes in 27 kJ27\ \text{kJ} of energy, and its temperature rises from 19 °C19\ \text{°C} to 69 °C69\ \text{°C}. Calculate the specific heat capacity of the metal.

Try it first, then reveal one step at a time.

  1. Change the energy to joules: 27 kJ=27 000 J27\ \text{kJ} = 27\,000\ \text{J}.
Check yourself
Equal masses of copper and aluminium are given the same amount of energy. Aluminium has the greater specific heat capacity. Which statement is correct?
Check yourself
Cooking oil of mass 0.40 kg0.40\ \text{kg} has a specific heat capacity of 2200 J/(kg °C)2200\ \text{J/(kg °C)}. It takes in 13 200 J13\,200\ \text{J} of energy. Calculate its temperature rise, in °C.

Measuring specific heat capacity Extended only

To find cc you measure three things: the energy supplied ΔE\Delta E, the mass mm and the temperature rise Δθ\Delta\theta. An electric heater supplies the energy, and a joulemeter measures it.

Apparatus for measuring the specific heat capacity of a metal block. The block sits on the bench, wrapped in insulation on all sides. An electric heater fits into one hole in the top of the block and a thermometer into another hole. The heater's two wires go up to a power supply, with a joulemeter connected in series between them to measure the energy supplied. power supply joulemeter heater thermometer metal block insulation
Apparatus for finding cc for a metal.

Without a joulemeter, use ΔE=Pt\Delta E = Pt for a heater of known power PP. A voltmeter and an ammeter can give PP too (4.2.5).

Worked exampleDescribe an experiment to measure the specific heat capacity of aluminium, using an aluminium block with two holes in it.

Try it first, then reveal one step at a time.

  1. Say what you measure, which instrument measures it, and how you work out cc.

For a liquid, put it in an insulated beaker or polystyrene cup with a lid. Weigh the container empty and then with the liquid, and subtract to find the liquid's mass. Keep the heater fully under the liquid.

Stir the liquid before each temperature reading, so the whole liquid is at the same temperature.

Some energy always escapes to the surroundings, and some warms the heater and container. So the temperature rise is smaller than it should be, and the value of cc you calculate is too high. Insulation and a lid reduce this.

You can also record the temperature every 60 s and plot temperature against time. While the heater supplies energy at a steady rate and little energy escapes, the graph is a straight line. Its is Δθt\frac{\Delta\theta}{t}, so c=Pm×gradientc = \frac{P}{m \times \text{gradient}}.

Graph of the temperature of a metal block against time while a heater warms it. Time in seconds from 0 to 350 is on the horizontal axis and temperature in degrees Celsius from 0 to 40 is on the vertical axis. Crosses every 60 seconds lie on a straight line that rises from 17.0 degrees Celsius at 0 seconds to 35.0 degrees Celsius at 300 seconds. A dashed right-angled triangle under the line has a horizontal side labelled 300 s and a vertical side labelled 18.0 degrees Celsius. 0 100 200 300 0 10 20 30 40 time / s temperature / °C 300 s 18.0 °C
Temperature against time for a heated block. The gradient is the temperature rise per second.
Worked exampleA 40 W40\ \text{W} heater warms a metal block of mass 0.75 kg0.75\ \text{kg}. The graph of temperature against time is a straight line from 17.0 °C17.0\ \text{°C} at t=0t = 0 to 35.0 °C35.0\ \text{°C} at t=300 st = 300\ \text{s}. Calculate the specific heat capacity of the metal.

Try it first, then reveal one step at a time.

  1. Find the gradient: 35.0−17.0300=18.0300=0.060 °C/s\frac{35.0 - 17.0}{300} = \frac{18.0}{300} = 0.060\ \text{°C/s}.
Check yourself
A student's value for the specific heat capacity of copper is higher than the accepted value. What is the most likely reason?
Check yourself
When measuring the specific heat capacity of water, why do you stir the water before reading the thermometer?

Common mistakes

  • Extended: using the final temperature as Δθ\Delta\theta. Subtract the starting temperature to get the rise.
  • Extended: leaving the energy in kJ or the mass in g. Change to J and kg first, or cc comes out 1000 times too small.
  • Using a time in minutes in ΔE=Pt\Delta E = Pt. Change it to seconds first.
  • Extended: defining specific heat capacity without "per unit mass". The definition needs both: per unit mass and per unit rise in temperature.

Exam tips

  • "Define" specific heat capacity (Extended) in words: energy, per unit mass, per unit (1 °C) rise in temperature. An equation alone counts only if you explain every symbol.
  • "Calculate" cc (Extended): write c=ΔEmΔθc = \frac{\Delta E}{m\Delta\theta} or its rearrangement, substitute in J, kg and °C, then give the answer with its unit.
  • "Describe" an experiment to measure cc (Extended): say what you measure, the instrument for each, and how you work out cc from the readings.

Key takeaways

Learn thisWhen the temperature of an object rises, its internal energy increases. (Internal energy can also rise with no temperature change, while a substance melts or boils.)
Learn thisA temperature rise means the average kinetic energy of all the particles in the object increases.
Learn thisSpecific heat capacity is the energy needed per unit mass per unit rise in temperature, in J/(kg °C)\text{J/(kg °C)}.
Learn thisc=ΔEmΔθc = \frac{\Delta E}{m\Delta\theta}
Learn thisΔE=mcΔθ\Delta E = mc\Delta\theta holds only while there is no change of state. Use J, kg and the temperature rise in °C.
Learn thisTo measure cc: mass on a balance, energy from a joulemeter (or PtPt), temperature rise from a thermometer. Insulate, and stir a liquid. Energy lost to the surroundings makes the measured cc too high.

Practise this

29 past-paper questions on Specific heat capacity in the 0625 Extended bank, each with a mark scheme and a worked explanation.

Practise Specific heat capacity →