IB Chemistry HL · Topic practice

Matter, amounts and stoichiometry past paper questions

Practise translating between masses, moles, formulae and balanced equations. Keep units visible and check that each ratio comes from the equation in the question.

Appears inPaper 1 140Paper 2 65Paper 3 33

Sort questions

You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.

Unlock from $6/mo
24 free questions

2020 NovemberPaper 1Question 1Component P1TZ01 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

1. What is the number of carbon atoms in 12 g of ethanoic acid CH3COOH, Mr = 60? A. 0.20 B. 2.0 C. 1.2 × 1023 D. 2.4 × 1023

2020 NovemberPaper 1Question 2Component P1TZ01 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

2. Which of these molecular formulae are also empirical formulae? I. C2H6O II. C2H4O2 III. C5H12 A. I and II only B. I and III only C. II and III only D. I, II and III

2020 NovemberPaper 1Question 3Component P1TZ01 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

Turn over 3. Which volume of ethane gas, in cm3, will produce 40 cm3 of carbon dioxide gas when mixed with 140 cm3 of oxygen gas, assuming the reaction goes to completion? 2C2H6 (g) + 7O2 (g) → 4CO2 (g) + 6H2O (g) A. 10 B. 20 C. 40 D. 80

2020 NovemberPaper 2Question 1Component P2TZ032 marks
Atomic structure and periodicityPeriodic table and trendsElectron configurations and emission spectraNuclear atom, isotopes and mass spectraThe mole and reacting quantities
Loading original question

Turn over 1. Chlorine undergoes many reactions. (a) (i) State the full electron configuration of the chlorine atom. [1] (ii) State, giving a reason, whether the chlorine atom or the chloride ion has a larger radius. [1] (iii) Outline why the chlorine atom has a smaller atomic radius than the sulfur atom. [2] (This question continues on the following page) (Question 1 continued) (iv) The mass spectrum of chlorine is shown. m/z Relative abundance 60 50 70 30 20 10 0 40 Outline the reason for the two peaks at m/z = 35 and 37. [1] (v) Explain the presence and relative abundance of the peak at m/z = 74. [2] (b) 2.67 g of manganese(IV) oxide was added to 200.0 cm3 of 2.00 mol dm−3 HCl. MnO2 (s) + 4HCl (aq) → Cl2 (g) + 2H2O (l) + MnCl2 (aq) (i) Calculate the amount, in mol, of manganese(IV) oxide added. [1] (This question continues on the following page) Turn over (Question 1 continued) (ii) Determine the limiting reactant, showing your calculations. [2] (iii) Determine the excess amount, in mol, of the other reactant. [1] (iv) Calculate the volume of chlorine, in dm3, produced if the reaction is conducted at standard temperature and pressure (STP). Use section 2 of the data booklet. [1] (v) State the oxidation state of manganese in MnO2 and MnCl2. [2] MnO2: MnCl2: (vi) Deduce, referring to oxidation states, whether MnO2 is an oxidizing or reducing agent. [1] (This question continues on the following page) (Question 1 continued) (c) Chlorine gas reacts with water to produce hypochlorous acid and hydrochloric acid. Cl2 (g) + H2O (l)  HClO (aq) + HCl (aq) (i) Hypochlorous acid is considered a weak acid. Outline what is meant by the term weak acid. [1] (ii) State the formula of the conjugate base of hypochlorous acid. [1] (iii) Calculate the concentration of H+ (aq) in a HClO (aq) solution with a pH = 3.61. [1] (d) (i) State the type of reaction occurring when ethane reacts with chlorine to produce chloroethane. [1] (ii) Predict, giving a reason, whether ethane or chloroethane is more reactive. [1] (This question continues on the following page) Turn over (Question 1 continued) (iii) Explain the mechanism of the reaction between chloroethane and aqueous sodium hydroxide, NaOH (aq), using curly arrows to represent the movement of electron pairs. [3] (iv) Ethoxyethane (diethyl ether) can be used as a solvent for this conversion. Draw the structural formula of ethoxyethane. [1] (v) Deduce the number of signals and chemical shifts with splitting patterns in the 1H NMR spectrum of ethoxyethane. Use section 27 of the data booklet. [3] (This question continues on the following page) (Question 1 continued) (e) CCl2F2 is a common chlorofluorocarbon, CFC. (i) Calculate the percentage by mass of chlorine in CCl2F2. [2] (ii) Comment on how international cooperation has contributed to the lowering of CFC emissions responsible for ozone depletion. [1] (iii) CFCs produce chlorine radicals. Write two successive propagation steps to show how chlorine radicals catalyse the depletion of ozone. [2]

2020 NovemberPaper 2Question 5Component P2TZ012 marks
Acids and basesTitrations, curves and indicatorsPH, strong and weak acids and bases, Ka and KbBuffers and salt hydrolysisThe mole and reacting quantities
Loading original question

5. A student performs a titration to determine the concentration of ethanoic acid, CH3COOH, in vinegar using potassium hydroxide. (a) Write a balanced equation for the reaction. [1] (This question continues on the following page) Turn over (Question 5 continued) (b) The pH curve for the reaction is given. 0 2 4 6 8 10 12 A B D C 14 Volume of KOH / cm3 pH (i) Identify the major species, other than water and potassium ions, at these points. [2] B: C: (ii) State a suitable indicator for this titration. Use section 22 of the data booklet. [1] (iii) Suggest, giving a reason, which point on the curve is considered a buffer region. [1] (This question continues on the following page) (Question 5 continued) (c) State the Ka expression for ethanoic acid. [1] (d) Calculate the Kb of the conjugate base of ethanoic acid using sections 2 and 21 of the data booklet. [1] (e) In a titration, 25.00 cm3 of vinegar required 20.75 cm3 of 1.00 mol dm−3 potassium hydroxide to reach the end-point. Calculate the concentration of ethanoic acid in the vinegar. [2] (f) Potassium hydroxide solutions can react with carbon dioxide from the air. The solution was made one day prior to using it in the titration. (i) State the type of error that would result from the student’s approach. [1] (This question continues on the following page) (Question 5 continued) (ii) Predict, giving a reason, the effect of this error on the calculated concentration of ethanoic acid in 5(e). [2]

2020 NovemberPaper 3Question 1Component P3TZ05 marks
Measurement, data and practical workExperimental design, safety and evaluationParticles, states, mixtures and separationAnalytical techniques
Loading original question

1. In order to determine the oil content of different types of potato crisps (chips), a student weighed 5.00 g of crushed crisps and mixed them with 20.0 cm3 of non-polar solvent. She assumed all the oil in the crisps dissolved in the solvent. The student then filtered the mixture to remove any solids, and gently heated the solution on a hot plate to evaporate the solvent. She measured the mass of the oil that remained from each type of crisps. (a) Suggest why a non-polar solvent was needed. [1] (b) State one reason why the mixture was not heated strongly. [1] (c) Non-polar solvents can be toxic. Suggest a modification to the experiment which allows the evaporated solvent to be collected. [1] (This question continues on the following page) Turn over (Question 1 continued) (d) Suggest one source of error in the experiment, excluding faulty apparatus and human error, that would lead to the following: [2] Experimental mass greater than actual mass of oil in crisps: Experimental mass lower than actual mass of oil in crisps:

2020 NovemberPaper 3Question 9Component P3TZ03 marks
Organic chemistry and molecular analysisBiomolecules and medicinal chemistryThe mole and reacting quantities
Loading original question

Turn over 9. Biomagnification factor, BMF, can be defined as the concentration of a chemical, X, in a predator, relative to the concentration found in its prey. BMF = predator prey [X] [X] , where [X] = (μg X per kg body weight) (a) Calculate the BMF if a 120 kg shark consumes 1000 mackerel in one year. Each mackerel weighs 1 kg on average. The [X]mackerel = 0.3 μg X per kg body weight. Assume chemical X remains in the shark’s body for two years. [2] (b) Suggest, with a reason, if fat-soluble or water-soluble xenobiotics would have a larger BMF. [1] (Option B continues on the following page) (Option B continued)

2020 NovemberPaper 3Question 11Component P3TZ012 marks
Energetics, thermodynamics and fuelsCombustion, fuels, biofuels and energy technologiesFunctional groups and reactionsMass spectrometry, IR, NMR and chromatographySolutions and gases
Loading original question

11. Gasoline (petrol), biodiesel and ethanol are fuels. Gasoline (petrol) Biodiesel Ethanol Chemical structure Mainly hydrocarbons of chain length C4–C12 Methyl esters of fatty acids of chain lengths C12–C22 CH3CH2OH Energy density / kJ dm−3 31 800 33 400 21 200 (a) Calculate the energy released, in kJ, from the complete combustion of 5.00 dm3 of ethanol. [1] (b) State a class of organic compounds found in gasoline. [1] (c) Outline the advantages and disadvantages of using biodiesel instead of gasoline as fuel for a car. Exclude any discussion of cost. [4] Advantages: Disadvantages: (Option C continues on the following page) Turn over (Option C, question 11 continued) (d) A mixture of gasoline and ethanol is often used as a fuel. Suggest an advantage of such a mixture over the use of pure gasoline. Exclude any discussion of cost. [1] (e) (i) When combusted, all three fuels can release carbon dioxide, a greenhouse gas, as well as particulates. Contrast how carbon dioxide and particulates interact with sunlight. [1] (ii) Methane is another greenhouse gas. Contrast the reasons why methane and carbon dioxide are considered significant greenhouse gases. [2] (iii) Suggest a wavenumber absorbed by methane gas. [1] (Option C continues on the following page) (Option C, question 11 continued) (iv) Determine the relative rate of effusion of methane (Mr = 16.05) to carbon dioxide (Mr = 44.01), under the same conditions of temperature and pressure. Use section 1 of the data booklet. [1]

2020 NovemberPaper 3Question 16Component P3TZ03 marks
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

16. Consider the following antacids: Antacid X Antacid Y Active substance Magnesium hydroxide (Mr = 58.32) Calcium carbonate (Mr = 100.09) Mass of active substance in tablet / g 0.200 0.220 Show that antacid X is more effective, per tablet, than antacid Y. [3]

2020 NovemberPaper 3Question 18Component P3TZ04 marks
Matter, amounts and stoichiometryParticles, states, mixtures and separationSolutions and gasesRepresentations, nomenclature and isomerism
Loading original question

18. A mixture of 0.100 mol ethanal, 0.100 mol ethanol and 0.200 mol ethanoic acid is fractionally distilled. Mixture Anti-bumping granules Fractionating column Water out Water in 4th 3rd 2nd 1st Thermometer Increasing boiling point of fraction Condenser Heat (a) (i) Calculate the mole fraction of ethanal in the mixture. [1] (ii) The vapour pressure of pure ethanal at 20 C is 101 kPa. Calculate the vapour pressure of ethanal above the liquid mixture at 20 C. [1] (Option D continues on the following page) (Option D, question 18 continued) (b) Describe how this mixture is separated by fractional distillation. [2]

2019 MayPaper 1Question 1Component P1TZ11 mark
Matter, amounts and stoichiometryParticles, states, mixtures and separation
Loading original question

1. Which diagram represents a heterogeneous mixture? A. B. C. D.

2019 MayPaper 1Question 1Component P1TZ21 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

1. How many moles of magnesium hydroxide are produced with 0.50 mol of ammonia? Mg3N2 (s) + 6H2O (l) → 3Mg(OH)2 (aq) + 2NH3 (aq) A. 0.25 B. 0.33 C. 0.75 D. 1.5

2019 NovemberPaper 1Question 1Component P1TZ01 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

1. 0.10 mol of hydrochloric acid is mixed with 0.10 mol of calcium carbonate. 2HCl (aq) + CaCO3 (s) → CaCl2 (aq) + H2O (l) + CO2 (g) Which is correct? Limiting reagent Maximum yield of CO2 / mol A. HCl (aq) 0.10 B. CaCO3 (s) 0.05 C. HCl (aq) 0.05 D. CaCO3 (s) 0.10

2019 MayPaper 1Question 2Component P1TZ11 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

2. What volume of carbon dioxide, CO2 (g), can be obtained by reacting 1 dm3 of methane, CH4 (g), with 1 dm3 of oxygen, O2 (g)? CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l) A. 0.5 dm3 B. 1 dm3 C. 2 dm3 D. 6 dm3

2019 MayPaper 1Question 2Component P1TZ21 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

2. What is the sum of the integer coefficients when propene undergoes complete combustion? __C3H6 (g) + __O2 (g) → __CO2 (g) + __H2O (l) A. 11 B. 17 C. 21 D. 23

2019 NovemberPaper 1Question 2Component P1TZ01 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

2. What is the sum of the coefficients when the equation is balanced with whole numbers? __MnO2 (s) + __HCl (aq) → __MnCl2 (aq) + __H2O (l) + __Cl2 (g) A. 6 B. 7 C. 8 D. 9

2019 MayPaper 1Question 3Component P1TZ11 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

3. What is the empirical formula of a hydrocarbon with 75 % carbon and 25 % hydrogen by mass? A. C3H B. CH2 C. C2H6 D. CH4 Turn over M19/4/CHEMI/HPM/ENG/TZ1/XX

2019 MayPaper 1Question 3Component P1TZ21 mark
Matter, amounts and stoichiometrySolutions and gases
Loading original question

3. What is the volume of gas when the pressure on 100 cm3 of gas is changed from 400 kPa to 200 kPa at constant temperature? A. 50.0 cm3 B. 100 cm3 C. 200 cm3 D. 800 cm3

2019 NovemberPaper 1Question 3Component P1TZ01 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

3. Which contains the greatest number of moles of oxygen atoms? A. 0.05 mol Mg(NO3)2 B. 0.05 mol C6H4(NO2)2 C. 0.1 mol H2O D. 0.1 mol NO2

2019 MayPaper 1Question 10Component P1TZ11 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

10. What is the IUPAC name of NiCO3? A. nickel(II) carbonate B. nickel carbonate C. nickel(I) carbonate D. nitrogen(I) carbonate Turn over

Matter, amounts and stoichiometry: quick facts

How often does Matter, amounts and stoichiometry come up in IB Chemistry HL?

Matter, amounts and stoichiometry is tagged on 238 of the 2,036 IB Chemistry HL past-paper questions on PastPaperPrep (12%), from papers sat 2016-2026. Paper 1 has the most Matter, amounts and stoichiometry questions, with 140. These are archive counts, not a prediction, and a question can carry more than one topic.

Are the IB Chemistry HL Matter, amounts and stoichiometry questions free?

84 of the 238 IB Chemistry HL Matter, amounts and stoichiometry questions are free to practise. The other 154 need a plan for IB Chemistry HL, from $6 a month.

Do the IB Chemistry HL Matter, amounts and stoichiometry questions have answers?

Yes. Each IB Chemistry HL Matter, amounts and stoichiometry question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.

“Every question for that one subtopic I kept failing, in one place.”

Ji-woo P.IB DP Year 2, South Korea