IB Chemistry HL · Topic practice

Bonding, structure and materials past paper questions

Compare structures and bonding to explain observable properties. Strong answers connect the particle-level model to the material behaviour asked about.

Appears inPaper 1 178Paper 2 93Paper 3 111

Sort questions

You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.

Unlock from $6/mo
24 free questions

2020 NovemberPaper 1Question 9Component P1TZ01 mark
Bonding, structure and materialsLewis structures, VSEPR, hybridization, formal charge and resonance
Loading original question

9. Which of these species contains the shortest carbon to oxygen bond length? A. CH3CH2O− B. CH3CH2OH C. CH3COO− D. CH3COOH

2020 NovemberPaper 1Question 10Component P1TZ01 mark
Bonding, structure and materialsIonic, covalent and metallic bonding
Loading original question

Turn over 10. Which molecule is most polar? A. CHF3 B. CF4 C. CClF3 D. CCl4

2020 NovemberPaper 1Question 11Component P1TZ01 mark
Bonding, structure and materialsLewis structures, VSEPR, hybridization, formal charge and resonance
Loading original question

11. Which combination correctly describes the geometry of BrF4 −? Electron domain geometry around Br Molecular geometry around Br A. Octahedral Tetrahedral B. Tetrahedral Square planar C. Octahedral Square planar D. Tetrahedral Tetrahedral

2020 NovemberPaper 1Question 12Component P1TZ01 mark
Bonding, structure and materialsIonic, covalent and metallic bonding
Loading original question

12. Which series shows the correct order of metallic bond strength from strongest to weakest? A. Na > K > Rb > Mg B. Mg > Rb > K > Na C. Rb > K > Na > Mg D. Mg > Na > K > Rb

2020 NovemberPaper 1Question 13Component P1TZ01 mark
Bonding, structure and materialsIonic, covalent and metallic bonding
Loading original question

13. Which statement is correct? A. O3 bond dissociation occurs at a longer wavelength of light than O2 bond dissociation. B. O3 bond dissociation occurs at a higher energy than O2 bond dissociation. C. O3 bond lengths are shorter than O2 bond lengths. D. O3 bond dissociation occurs at a higher frequency of light than O2 bond dissociation.

2020 NovemberPaper 2Question 2Component P2TZ014 marks
Organic chemistry and molecular analysisRepresentations, nomenclature and isomerismLewis structures, VSEPR, hybridization, formal charge and resonanceSynthesis and mechanismsMass spectrometry, IR, NMR and chromatography
Loading original question

Turn over 2. Compound A is in equilibrium with compound B. OH O A B (a) Predict the electron domain and molecular geometries around the oxygen atom of molecule A using VSEPR. [2] Electron domain geometry: Molecular geometry: (b) State the type of hybridization shown by the central carbon atom in molecule B. [1] (c) State the number of sigma (σ) and pi (π) bonds around the central carbon atom in molecule B. [1] σ-bonds: π-bonds: (This question continues on the following page) (Question 2 continued) (d) The IR spectrum of one of the compounds is shown: 4500 4000 3500 3000 2500 2000 1500 1000 0.0 0.2 0.4 0.6 0.5 0.3 0.1 0.8 0.7 0.9 Wavenumber / cm–1 Transmittance Deduce, giving a reason, the compound producing this spectrum. [1] (e) Compound A and B are isomers. Draw two other structural isomers with the formula C3H6O. [2] (This question continues on the following page) Turn over (Question 2 continued) (f) (i) The equilibrium constant, Kc, for the conversion of A to B is 1.0 × 108 in water at 298 K. Deduce, giving a reason, which compound, A or B, is present in greater concentration when equilibrium is reached. [1] (ii) Calculate the standard Gibbs free energy change, ΔGÖ, in kJ mol–1, for the reaction (A to B) at 298 K. Use sections 1 and 2 of the data booklet. [1] (g) Propanone can be synthesized in two steps from propene. (i) Suggest the synthetic route including all the necessary reactants and steps. [3] (This question continues on the following page) (Question 2 continued) (ii) Suggest why propanal is a minor product obtained from the synthetic route in (g)(i). [2]

2020 NovemberPaper 2Question 4Component P2TZ013 marks
KineticsEnergy profiles and catalystsCollision theory and rate factorsIntermolecular forces and solidsElectrochemical cells and potentials
Loading original question

4. Nickel catalyses the conversion of propanone to propan-2-ol. O OH H2 Ni, heat (a) Outline how a catalyst increases the rate of reaction. [1] (b) Explain why an increase in temperature increases the rate of reaction. [2] (c) Discuss, referring to intermolecular forces present, the relative volatility of propanone and propan-2-ol. [3] (This question continues on the following page) Turn over (Question 4 continued) (d) (i) The diagram shows an unlabelled voltaic cell for the reaction. Pb2+ (aq) + Ni (s) → Ni2+ (aq) + Pb (s) Label the diagram with the species in the equation. [1] − + v Anode Cathode (ii) Calculate the standard cell potential, in V, for the cell at 298 K. Use section 24 of the data booklet. [1] (iii) Calculate the standard free energy change, ΔGÖ, in kJ, for the cell using sections 1 and 2 of the data booklet. [1] (iv) Suggest a metal that could replace nickel in a new half-cell and reverse the electron flow. Use section 25 of the data booklet. [1] (This question continues on the following page) (Question 4 continued) (v) Describe the bonding in metals. [2] (vi) Nickel alloys are used in aircraft gas turbines. Suggest a physical property altered by the addition of another metal to nickel. [1]

2020 NovemberPaper 3Question 3Component P3TZ011 marks
Bonding, structure and materialsPolymers, materials, alloys and nanotechnologyIntermolecular forces and solids
Loading original question

Turn over 3. Carbon fibre reinforced plastic (CFRP) is a useful composite. Epoxy is a thermoset polymer that is used as a binding polymer when making CFRP. (a) Outline the two distinct phases of this composite. [2] (b) (i) Thermoplastic composites are increasingly replacing thermosets. Suggest one advantage of thermoplastic polymers over thermosets. [1] (ii) Explain how thermoplastics, such as polyvinylchloride, PVC, can be made more flexible by the addition of phthalate ester plasticizers. [3] (Option A continues on the following page) (Option A, question 3 continued) (iii) Explain why phthalates are replaced by other plasticizers in the production of plastics. [2] (c) Classify PVC and polyethene terephthalate, PET, as addition or condensation polymers and deduce the structural formulas. [3] C C H H Cl H n C C O O O O CH2 CH2 n PVC PET Polymer Classification Structure of monomer(s) PVC PET (Option A continues on the following page) (Option A continued)

2020 NovemberPaper 3Question 4Component P3TZ015 marks
Bonding, structure and materialsPolymers, materials, alloys and nanotechnologyElectrolysis, batteries and fuel cells
Loading original question

Turn over 4. There has been significant growth in the use of carbon nanotubes, CNT. (a) Explain these properties of carbon nanotubes. [2] Excellent strength: Excellent conductivity: (b) (i) CNT can act as Type 2 superconductors. Outline why Type 2 superconductors are generally more useful than Type 1. [2] (ii) Explain the role of electrons in superconducting materials in terms of the Bardeen–Cooper–Schrieffer (BCS) theory. [3] (Option A continues on the following page) (Option A, question 4 continued) (c) (i) Alloying metals changes their properties. Suggest one property of magnesium that could be improved by making a magnesium–CNT alloy. [1] (ii) Pure magnesium needed for making alloys can be obtained by electrolysis of molten magnesium chloride. Iron cathode Gas Inert gas in Molten magnesium Molten magnesium chloride Inert gas out Graphite anode Calculate the theoretical mass of magnesium obtained if a current of 3.00 A is used for 10.0 hours. Use charge (Q) = current (I ) × time (t ) and section 2 of the data booklet. [3] (Option A continues on the following page) Turn over (Option A, question 4 continued) (iii) Suggest a gas which should be continuously passed over the molten magnesium in the electrolytic cell. [1] (d) Zeolites can be used as catalysts in the manufacture of CNT. Explain, with reference to their structure, the high selectivity of zeolites. [2] (e) Experiments have been done to explore the nematic liquid crystal behaviour of CNT. Justify how CNT molecules could be classified as nematic. [1] (Option A continues on page 13) Please do not write on this page. Answers written on this page will not be marked. (Option A continued)

2020 NovemberPaper 3Question 6Component P3TZ08 marks
Organic chemistry and molecular analysisBiomolecules and medicinal chemistryMass spectrometry, IR, NMR and chromatographyIntermolecular forces and solids
Loading original question

6. Proteins are polymers of amino acids. (a) (i) A paper chromatogram of two amino acids, A1 and A2, is obtained using a non‑polar solvent. Solvent front A1 A2 Mixture Determine the Rf value of A1. [1] (Option B continues on the following page) Turn over (Option B, question 6 continued) (ii) The mixture is composed of glycine, Gly, and isoleucine, Ile. Their structures can be found in section 33 of the data booklet. Deduce, referring to relative affinities and Rf, the identity of A1. [2] (b) Glycine is one of the amino acids in the primary structure of hemoglobin. State the type of bonding responsible for the α-helix in the secondary structure. [1] (c) (i) Sketch and label two oxygen dissociation curves, one for adult hemoglobin and one for foetal hemoglobin. [2] 0 0 20 40 60 80 100 Oxygen partial pressure Percentage hemoglobin saturation 100 (Option B continues on the following page) (Option B, question 6 continued) (ii) Explain why the affinity for oxygen of foetal hemoglobin differs from that of adult hemoglobin. [2]

2020 NovemberPaper 3Question 7Component P3TZ07 marks
Organic chemistry and molecular analysisBiomolecules and medicinal chemistryIntermolecular forces and solids
Loading original question

7. Phospholipids are a main component of cell membranes. (a) Deduce the products of the hydrolysis of a non-substituted phospholipid, where R1 and R2 represent long alkyl chains. [2] H2C O C O R1 HC O C O R2 H2C O P O OH OH + 3H2O H+ heat (Option B continues on the following page) Turn over (Option B, question 7 continued) (b) (i) A representation of a phospholipid bilayer cell membrane is shown: Extracellular space Intracellular space A B Identify the components of the phospholipid labelled A and B. [1] A: B: (ii) State the most significant intermolecular forces in the phospholipid in b(i). [2] Forces occurring between components labelled A: Forces occurring between components labelled B: (Option B continues on the following page) (Option B, question 7 continued) (c) Phospholipids help maintain cellular environments while fatty acid lipids have important roles in energy storage and electrical insulation. Discuss the structural properties of saturated fats needed for these roles. [2] Energy storage: Electrical insulator:

2019 MayPaper 1Question 9Component P1TZ11 mark
Bonding, structure and materialsIntermolecular forces and solids
Loading original question

9. What is the order of increasing boiling point? A. CH3CH2CH2CH3 < CH3CH(OH)CH3 < CH3COCH3 < CH3CO2H B. CH3CH2CH2CH3 < CH3COCH3 < CH3CH(OH)CH3 < CH3CO2H C. CH3CO2H < CH3COCH3 < CH3CH(OH)CH3 < CH3CH2CH2CH3 D. CH3CH2CH2CH3 < CH3COCH3 < CH3CO2H < CH3CH(OH)CH3

2019 NovemberPaper 1Question 9Component P1TZ01 mark
Bonding, structure and materialsIonic, covalent and metallic bonding
Loading original question

9. Which compound has the shortest C to O bond? A. CH3CHO B. CO C. CO2 D. C2H5OC2H5

2019 MayPaper 1Question 10Component P1TZ21 mark
Bonding, structure and materialsIonic, covalent and metallic bonding
Loading original question

10. Which combination causes the strength of metallic bonding to increase? Charge on cations Ionic radius A. smaller smaller B. larger larger C. smaller larger D. larger smaller

2019 NovemberPaper 1Question 10Component P1TZ01 mark
Bonding, structure and materialsLewis structures, VSEPR, hybridization, formal charge and resonance
Loading original question

10. Which describes a resonance structure? A. Double bond can be drawn in alternative positions. B. Bonds vibrate by absorbing IR radiation. C. A double and a single bond in the molecule D. A Lewis structure

2019 MayPaper 1Question 11Component P1TZ11 mark
Bonding, structure and materialsIonic, covalent and metallic bonding
Loading original question

11. Which combination corresponds to a strong metallic bond? Charge on the metal ion Radius of ion A. large large B. large small C. small small D. small large

2019 MayPaper 1Question 11Component P1TZ21 mark
Bonding, structure and materialsLewis structures, VSEPR, hybridization, formal charge and resonance
Loading original question

11. Which species has a square planar molecular geometry? A. SF4 B. XeF4 C. CF4 D. PF4 +

2019 NovemberPaper 1Question 11Component P1TZ01 mark
Bonding, structure and materialsIonic, covalent and metallic bonding
Loading original question

11. What is the structure and bonding in SiO2 (s)? Structure Bonding A. giant covalent B. giant ionic C. bent molecule covalent D. linear molecule covalent Turn over

2019 MayPaper 1Question 12Component P1TZ11 mark
Bonding, structure and materialsLewis structures, VSEPR, hybridization, formal charge and resonance
Loading original question

12. Which species has delocalized electrons? A. OH− B. H2CO C. CO2 D. CO3 2−

2019 MayPaper 1Question 12Component P1TZ21 mark
Bonding, structure and materialsLewis structures, VSEPR, hybridization, formal charge and resonance
Loading original question

12. How many sigma (σ) and pi (π) bonds are present in hydrogen cyanide, HCN? Sigma (σ) Pi (π) A. 1 1 B. 2 2 C. 2 1 D. 1 3 Turn over

Bonding, structure and materials: quick facts

How often does Bonding, structure and materials come up in IB Chemistry HL?

Bonding, structure and materials is tagged on 382 of the 2,036 IB Chemistry HL past-paper questions on PastPaperPrep (19%), from papers sat 2016-2026. Paper 1 has the most Bonding, structure and materials questions, with 178. These are archive counts, not a prediction, and a question can carry more than one topic.

Are the IB Chemistry HL Bonding, structure and materials questions free?

159 of the 382 IB Chemistry HL Bonding, structure and materials questions are free to practise. The other 223 need a plan for IB Chemistry HL, from $6 a month.

Do the IB Chemistry HL Bonding, structure and materials questions have answers?

Yes. Each IB Chemistry HL Bonding, structure and materials question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.

“Every question for that one subtopic I kept failing, in one place.”

Ji-woo P.IB DP Year 2, South Korea