2.3.4 · CorePaper 1Paper 2Paper 3Paper 4

Consequences of thermal energy transfer

In a minute

This lesson puts , and to work in everyday things: cooking pans, room heaters and vacuum flasks. For each one, you name the transfer and say why the design speeds it up or slows it down. Extended students also explain fires and car radiators, where two or three transfers matter at once.

You'll be able to

  • Explain why a cooking pan has a metal base and an insulating handle, and how the food inside it heats up.
  • Explain how a heater near the floor warms a whole room by convection.
  • Explain how each feature of a vacuum flask reduces conduction, convection or radiation.
  • Explain how conduction, convection and radiation all matter in a fire burning wood or coal and in a car radiator.
Before you start3 quick questions on what this builds on
Check yourself
Which of these materials is the best ?
Check yourself
Why does warm air rise above a heater?
Check yourself
Which way of transferring thermal energy can cross a vacuum?

Revise first: 2.2.1 Thermal expansion of solids, liquids and gases, 2.3.1 Conduction, 2.3.2 Convection and 2.3.3 Radiation

Pans and vacuum flasks: speeding up and slowing down transfer

Some designs want thermal energy to move fast, like a pan on a hob. Others want it to move slowly, like a flask of hot soup. Either way, you work out which transfers happen, then how each part of the design helps.

A pan's base is metal, often steel, aluminium or copper. Metals are good , so energy passes quickly from the hot hob through the base into the food.

The handle is plastic or wood. These are , so very little energy reaches your hand and the handle stays cool enough to hold.

Inside the pan, heats only the layer of soup or water touching the base. That warmed liquid expands, becomes less dense and rises, and cooler liquid sinks to take its place. This current carries energy through the whole pan.

Worked exampleA frying pan has a copper base and a plastic handle. Explain why each material is chosen.

Try it first, then reveal one step at a time.

  1. Take each part in turn: name the property, then say what it does for the cook.

A vacuum flask keeps a drink hot by slowing all three transfers. The same features keep a cold drink cold, because they slow energy moving in as well as out.

Cross-section of a vacuum flask holding a hot liquid. A container with two walls has a vacuum in the gap between them, and the surfaces facing the gap are silvered. An insulating stopper closes the top, and an outer case protects the container stopper (thermal insulator): less conduction and convection out of the top silvered surfaces: reflect thermal radiation vacuum between the walls: no particles, so no conduction or convection across the gap hot liquid outer case
Each feature of a vacuum flask slows a different transfer.

1. The between the walls has no particles. Conduction and convection both need particles, so neither can cross the gap.

2. The silvered surfaces are poor and poor of infrared. They reflect it back, so little energy crosses the gap by radiation.

3. The stopper is a thermal insulator, such as plastic or cork. It reduces conduction out of the top and stops warm air carrying energy away by convection.

Worked exampleA steel travel mug has a double wall with a vacuum between the two layers. The surfaces facing the vacuum are shiny. Explain how these features keep coffee hot.

Try it first, then reveal one step at a time.

  1. Deal with each feature: name the transfer it reduces, then give the reason.
Check yourself
Which feature of a vacuum flask mainly reduces energy transfer by radiation?
Check yourself
A cook stirs boiling soup with a wooden spoon, not a metal one. Why does the wooden spoon stay cooler to hold?

Heating a room by convection

A room heater sits low down, near the floor. It heats the air touching it, and that air carries energy round the whole room.

Side view of a room with a heater against the left wall near the floor and a window in the right wall. Warm air rises above the heater, spreads out under the ceiling, cools and sinks down the far side of the room, then flows back along the floor to the heater. The loop of moving air is a convection current warm air expands, becomes less dense and rises cooler, denser air sinks warm air spreads out under the ceiling cooler air flows back to the heater convection current heater window
A heater near the floor sets up a convection current that loops round the room.

1. Air next to the heater warms up and expands, so it becomes less dense and rises.

2. The warm air spreads out under the ceiling, loses energy, cools and becomes denser.

3. The cooler, denser air sinks and flows along the floor back to the heater, where it is warmed again. This loop is a convection current.

A wall "radiator" in a house works this way too. It gives out some infrared, but most of its energy reaches the room through the convection current it sets up.

Cooling works the other way round. An air-conditioning unit is fixed high up: the air it cools becomes denser and sinks, and warmer air rises to take its place.

Worked exampleAn electric heater is fixed to the wall just above the floor. Explain how it warms the air on the far side of the room.

Try it first, then reveal one step at a time.

  1. Follow the air round the loop: up from the heater, across, down, and back.
Check yourself
Why is an air-conditioning unit that cools a room fixed near the ceiling?

More than one transfer: fires and car radiators Extended only

In many real situations two or three transfers are important at once. Go through all three in turn, and say where each one happens.

A fire burning wood or coal in a fireplace:

1. Radiation: infrared travels straight out from the glowing fuel and flames. This is what warms your face and hands in front of the fire.

2. Convection: the hot gases above the fire are much less dense than the air around them, so they rise up the chimney. Fresh air is drawn in at the bottom, along the floor of the room, which keeps the fire supplied with oxygen.

3. Conduction: energy passes through the metal grate, the hearth and the bricks around the fire.

Much of the energy carried by convection goes up the chimney and out of the house. So an open fire warms the people in front of it mainly by radiation.

Worked exampleCampers sit round a wood fire outdoors at night. Explain why their faces feel warm, while their backs stay cold and the hot gases above the fire give them little warmth.

Try it first, then reveal one step at a time.

  1. Use a different transfer for each part: what reaches the faces, and where the hot gases go.

A car engine gets very hot. A liquid called coolant is pumped through channels in the engine and then through the radiator at the front of the car.

A car's cooling system. A pump pushes coolant round a loop. Hot coolant flows from the engine along the top pipe to the radiator. The radiator is made of thin metal tubes joined to many thin metal fins. Cool air from the front of the car flows between the fins and leaves warmer, carrying energy away. Cooler coolant returns to the engine along the bottom pipe hot engine hot coolant pump cooler coolant radiator: thin metal tubes and fins cool air in warmed air carried away
Coolant carries energy from the engine to the radiator, and air carries it away from the radiator.

1. Conduction: energy passes from the hot engine metal into the coolant. The pump moves the hot coolant to the radiator, carrying the energy with it.

2. Conduction again: in the radiator, energy passes through the thin metal walls of the tubes and into many thin metal fins. Thin metal conducts energy through quickly.

3. Convection: air flowing between the fins is warmed and carried away, by the car's motion or a fan. The fins give a large surface area, so a lot of air touches hot metal.

4. Radiation: the radiator also emits some infrared. Radiators are often painted dull black, a good emitter, but most of the energy is carried away by the air.

Worked exampleExplain how energy from the hot coolant inside a car radiator ends up in the air outside it.

Try it first, then reveal one step at a time.

  1. Follow the energy outwards: through the tube walls, into the fins, then into the air.
Check yourself
You sit a few metres in front of an open coal fire and feel your face get warm. By which process does most of this energy reach your face?
Check yourself
Why does a car radiator have many thin metal fins?

Common mistakes

  • Saying a vacuum stops radiation. Infrared crosses a vacuum; in a flask, the silvered surfaces reduce radiation and the vacuum stops conduction and convection.
  • Leaving out radiation when someone feels warm in front of a fire. The hot gases rise away from them, so the warmth they feel arrives mainly by radiation.
  • Writing "heat rises" or "cold sinks". Warm air rises because it is less dense; cooler, denser air sinks.
  • Extended: naming only one transfer for a fire or a car radiator. Check all three, and say where each one happens.

Exam tips

  • "Explain how each feature reduces energy transfer": for each feature, name the process and give the reason, such as "the vacuum has no particles, so there is no conduction or convection".
  • A Paper 1/2 multiple-choice question may ask which transfers happen in a scene. Test conduction, convection and radiation one at a time before you choose.
  • "Explain" convection in a room: say the warm air becomes less dense and rises, and the cooler, denser air sinks. Explain it with density, never with "heat rises".

Key takeaways

Learn thisPans: a metal base (good thermal conductor) passes energy quickly to the food; a plastic or wooden handle (thermal insulator) stays cool. Convection in the liquid spreads the energy through the pan.
Learn thisA heater near the floor warms a room by convection: warm air expands, becomes less dense and rises; cooler, denser air sinks and flows back to the heater.
Learn thisVacuum flask: the vacuum has no particles, so no conduction or convection across it; silvered surfaces reflect infrared and emit little, reducing radiation; an insulating stopper reduces conduction and convection out of the top.
Learn thisConduction and convection need particles. Radiation does not, so it can cross a vacuum.
Learn thisOpen fire: radiation warms people in front of it; hot gases rise up the chimney by convection, drawing in fresh air; energy conducts through the grate and surrounding bricks.
Learn thisCar radiator: the pumped coolant carries energy from the engine; it conducts through thin metal tubes and fins; air flowing past the large surface area carries it away by convection, with some radiation.

Practise this

4 past-paper questions on Consequences of thermal energy transfer in the 0625 Extended bank, each with a mark scheme and a worked explanation.

Practise Consequences of thermal energy transfer →