Experimental skills cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

Experimental skills

IGCSE PHYSICS 0625 · Extended
pastpaperprep.com/revision-notes

7.1Apparatus, techniques and safety

Diagrams: simple side views, label lines that touch each part, and a double-headed arrow between the exact points measured.LEARN
Too small or too quick to measure well? Measure many identical ones (sheets, turns, oscillations) and divide by the number.LEARN
Justify a choice with a reason: smaller scale divisions on a range that still reaches the reading, no reaction time (light gates), or a larger quantity to measure.LEARN
Safety: name the hazard in this experiment, then the precaution that reduces it, such as standing up near hot water or a sand tray under masses.LEARN
Accurate readings: eye level at right angles to the scale, bottom of a water meniscus, tare the balance, stir and wait for a thermometer, time from a marker at the centre of a swing.LEARN

7.2Planning investigations

Independent variable: what you change. Dependent variable: what you measure. Control variables: anything else that could affect the result, kept the same so the test is fair.LEARN
To control a variable, say how you keep it the same, such as setting the same current with a variable resistor and an ammeter. Explain why: it also affects the dependent variable.LEARN
Values: at least five, with units, evenly spaced over a wide range.LEARN
Justify apparatus or a technique with a reason, such as a range that reaches the reading with scale divisions small compared with it, or timing 10 oscillations to get a larger time to measure.LEARN
Plan: apparatus, method, control variables, a risk and its precaution, a results table, and how to reach a conclusion.LEARN
Results table: independent variable first, headings as quantity / unit, columns for repeats and the mean. Plot the dependent variable against the independent variable.LEARN
A reasoned prediction gives the expected change and the physics reason. At IGCSE, a numerical prediction is supported if the measured value differs from it by 10% or less of the predicted value.LEARN

7.3Taking and recording measurements

Analogue scale: value of one small division = gap between two labels ÷ number of divisions. Read to the nearest half division when the divisions are wide enough.LEARN
Digital display: record every digit shown, including a final zero, and convert mA to A if the table needs it.LEARN
Zero error: true value = reading − zero reading. If the zero reading is negative, subtracting it adds its size.LEARN
Check each reading is sensible; if not, check and measure again. Never change a reading to fit.LEARN
To find a pattern, take at least five values of the independent variable over a wide range. Repeat readings that can vary, and calculate a mean.LEARN
Tables: headings quantity / unit, independent variable first, the same decimal places down a column of readings, set by the instrument.LEARN

7.4Graphs, conclusions and evaluation

Graphs: axes labelled quantity / unit, an easy scale filling over half the grid, one thin best-fit line or smooth curve.LEARN
gradient=change in ychange in x\text{gradient} = \frac{\text{change in } y}{\text{change in } x}LEARN
Gradient: use a triangle covering over half the line, corners on the line. Unit = yy unit ÷ xx unit.LEARN
Directly proportional: a straight line through the origin. A straight line that misses the origin is linear but not proportional.LEARN
At IGCSE, two results agree within experimental accuracy if their difference is 10% or less of one of them (the predicted value, if there is one).LEARN
Random error scatters readings both ways: repeat and take a mean to reduce its effect. Systematic error, such as a zero error, shifts every reading the same way: correct the readings or the instrument.LEARN
Anomaly: repeat it if you can; otherwise leave it out of the mean and best-fit line, and say so.LEARN
Improvements are specific and say how they help: repeat and take a mean, a wider range, time many oscillations, light gates.LEARN

Which method when

'Find the thickness of one sheet' or 'the period of a pendulum' (too small or too quick for one good reading) → measure many identical ones together, such as a stack or 20 complete oscillations, then divide by the number; the reading or reaction-time error is shared between them (7.1)LEARN
'Choose the apparatus and justify your choice' → an instrument whose range reaches the reading and whose scale divisions are small compared with it, or light gates with an electronic timer for times well under a second; give the reason (smaller divisions, no reaction time), not just 'more accurate' (7.1, 7.2)LEARN
'Identify a hazard and a precaution' → name what could cause harm in this experiment (hot water, falling masses, hot wires), then the precaution that matches it and how it helps, such as a tray of sand under hanging masses; 'be careful' scores nothing (7.1)LEARN
'Describe how and explain why a variable is controlled' → name the control variable, the apparatus that sets it the same for every reading (an ammeter and a variable resistor for the current), and why: it also affects the dependent variable, so if it changed you could not tell which caused the change (7.2)LEARN
'Suggest a suitable number and range of values' → at least five values, with units, evenly spaced over the widest range the apparatus allows; for nn evenly spaced values the step is (largest − smallest) ÷ (n−1)(n - 1) (7.2)LEARN
'Record the reading' or 'complete the table' → work out one small division (gap between labels ÷ number of divisions), read to the nearest half division when the divisions are wide enough, subtract any zero reading (a negative one adds), and write it under a quantity / unit heading to the instrument's decimal places (7.3)LEARN
'Determine the gradient' or 'the intercept' → a triangle covering more than half of the best-fit line, with both corners read from the line, not the table; unit = yy unit ÷ xx unit; the intercept is the value of yy at x=0x = 0, so extend the line there if the xx scale starts above 0 (7.4)LEARN
'Is yy directly proportional to xx?' or 'do the results support the prediction?' → proportional only if the best-fit line is straight and passes through the origin; for two values, find the difference as a percentage of the predicted value (with no prediction, of one of the values): at IGCSE, 10% or less means equal within the limits of experimental accuracy; quote both values (7.2, 7.4)LEARN
'Suggest an improvement' or 'what should she do about this result?' → name the biggest problem and a specific fix: readings scattered both ways (random error) → repeat and calculate a mean; every reading shifted one way (systematic, such as a zero error) → correct the readings or the instrument; a control variable that changed → keep it the same and say how; an anomaly → repeat it, or leave it out of the mean and best-fit line and say so (7.4)LEARN
Follows the Cambridge IGCSE Physics 0625 syllabus (2026 to 2028). Not affiliated with Cambridge.