Planning investigations
In a minute
A planning question asks you to design an experiment you won't carry out. You decide what to change, what to measure and what to keep the same, choose the values and apparatus, keep it safe, and say how the results will answer the question.
You'll be able to
- Identify the and the , and describe how and explain why to control the others.
- Suggest how many values to use and their , and choose and justify the apparatus or technique.
- Describe a method with its risks and precautions, a results table, and how the results lead to a conclusion.
- Make a prediction with a physics reason, and judge whether results support it.
Before you start2 quick questions on what this builds on
Variables and a fair test
Every investigation asks how one quantity affects another, such as how the drop height of a ball affects how high it bounces.
Anything else that could affect the dependent variable is a . Keep each one the same for every reading. This makes the experiment a fair test.
Why? If two things change at once, you can't tell which one caused the change in your results. A fair test has : it tests what it says it tests.
Try it first, then reveal one step at a time.
- She chooses the drop height, so that is what she changes.
- She measures the bounce height.
- Ask what else could change the bounce: the ball itself and the surface it lands on.
- The independent variable is the drop height. The dependent variable is the bounce height. Two control variables are the ball (use the same ball each time) and the surface (drop it onto the same spot on the floor).
To describe how you control a variable, say what stays the same and how. "Keep the current constant" is weaker than "adjust the variable resistor so the ammeter shows the same current each time".
Try it first, then reveal one step at a time.
- The current also changes an electromagnet's strength, so it is a control variable.
- How: an ammeter to read it, a variable resistor to adjust it. Why: link a change in current to a change in the result.
- Connect an ammeter and a variable resistor in series with the coil. Before each test, adjust the variable resistor so the ammeter shows the same current. This matters because a larger current also makes the electromagnet stronger. If the current changed, she could not tell whether the turns or the current caused the change in the number of clips.
Choosing values and apparatus
Next, choose the values of the independent variable. Plan at least five different values, so a graph shows a clear pattern and an stands out.
Spread them evenly over a wide , from the smallest to the largest sensible value. A narrow range can hide the pattern. Give real values with units, and check your apparatus can reach them.
Try it first, then reveal one step at a time.
- Pick at least five values.
- Spread them widely with equal gaps, within what the bench allows.
- Say how the choice helps the graph.
- Use six distances: 20 cm, 30 cm, 40 cm, 50 cm, 60 cm and 70 cm. That is a range of 20 cm to 70 cm in equal steps of 10 cm. Six values spread over a wide range show the pattern clearly on a graph and make an anomaly easy to spot.
Then choose apparatus. Pick an instrument whose range reaches the largest reading and whose scale divisions are small compared with the reading, and justify it with a reason. A technique can help too, such as timing 10 oscillations of a pendulum and dividing by 10. 7.1 covers the common choices.
Try it first, then reveal one step at a time.
- Convert: .
- On the 0–5 A meter, 0.04 A is less than one 0.1 A division.
- The milliammeter's divisions are 2 mA, much smaller than the reading.
- Use the milliammeter. About 40 mA is 0.04 A, less than one division on the 0–5 A ammeter, so its needle would barely move. The milliammeter has smaller divisions of 2 mA, so the reading spans many divisions.
Writing the plan: method, safety and results
Papers 5 and 6 usually include a planning question. It lists what your plan must contain: work through that list in order.
A full plan covers: 1. apparatus, including any you add; 2. the method in clear steps; 3. the control variables and how you keep them the same.
4. A risk in this experiment, such as hot water or falling masses, and the precaution that matches it. 5. A results table. 6. How the results lead to a conclusion.
Write the method so someone else could follow it: what to set up, what to measure and with what, then "repeat for each value". Repeat each reading and calculate a mean.
In the table, put the independent variable first, then the dependent variable, with columns for repeats and the mean. Head each column quantity / unit, such as mass / g, so the boxes hold numbers only.
To reach a conclusion, plot the dependent variable (-axis) against the independent variable (-axis) and describe the pattern. A straight line through the origin means they are directly proportional.
Try it first, then reveal one step at a time.
- Independent variable: the mass. Dependent variable: the deflection . Anything else that changes the bend is a control variable.
- Add apparatus to measure , then write the steps, the table and the analysis.
- Extra apparatus: a vertical metre rule to measure the height of the end of the ruler, and a set square to line the end up with the scale. Read the height of the end with nothing hung on it, then hang the 100 g hanger and read it again. The deflection is the difference between the two readings. Repeat for 200 g, 300 g, 400 g, 500 g and 600 g, then repeat the whole set and calculate the mean deflection for each mass. Control variables: keep the same overhang length, measured each time, use the same ruler, and hang the masses at the same point. Risk: the masses could fall on someone's feet, so put a tray of sand underneath. Table columns: mass / g, first d / mm, second d / mm and mean d / mm. Plot a graph of mean d against mass. If it is a straight line through the origin, the deflection is directly proportional to the mass.
Predictions and testing them
A prediction says what you expect to happen. A reasoned prediction adds why, using physics you know.
Weak: "the bounce height will change". Better: "the bounce height will increase as the drop height increases, because the ball has more kinetic energy when it hits the floor".
Try it first, then reveal one step at a time.
- State the direction of the change, then the physics behind it.
- The fall time will increase as the area increases. A larger parachute has more air resistance at the same speed. So air resistance balances the weight at a lower speed, and the parachute falls more slowly.
Afterwards, compare the results with the prediction. At IGCSE, a predicted and a measured value agree within the limits of experimental if they differ by 10% or less of the predicted value (7.4).
Try it first, then reveal one step at a time.
- Predicted deflection for 400 g: .
- Difference: , and of the predicted value.
- Yes, the results support the prediction. Doubling 14 mm predicts 28 mm, and she measured 27 mm. The difference is about 4%, which is less than 10%, so the results agree with the prediction within the limits of experimental accuracy.
Common mistakes
- Naming a control variable without saying how it is kept the same.
- Writing "different values" instead of at least five real values, with units, over a wide range.
- Leaving units out of table headings, or writing "repeat" without "calculate a mean".
- Giving a prediction with no physics reason.
Exam tips
- "Identify" a variable: name the exact quantity, such as "bounce height", not just "the ball".
- "Describe how" to control a variable: name the apparatus and what stays the same. "Explain why": it would also change the dependent variable.
- In a planning question, answer every point in the list you are given, in order.
Key takeaways
Practise this
387 past-paper questions on Experimental skills and investigations in the 0625 Extended bank, each with a mark scheme and a worked explanation.