IB Physics notes › Wave behaviour › Cheat sheet

Wave behaviour cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

Wave behaviour

IB PHYSICS · HL
pastpaperprep.com/revision-notes

3.1Simple harmonic motion

Amplitude x0x_0 is the maximum displacement from equilibrium: half the distance between the extremes.LEARN
T=1f=2πωT = \frac{1}{f} = \frac{2\pi}{\omega}BOOKLET
a=−ω2xa = -\omega^{2}xBOOKLET
SHM needs an acceleration (and resultant force) proportional to the displacement and opposite to it, towards equilibrium. The minus sign in a=−ω2xa = -\omega^{2}x means aa and xx always have opposite signs.LEARN
T=2πmkT = 2\pi\sqrt{\frac{m}{k}}BOOKLET
T=2πlgT = 2\pi\sqrt{\frac{l}{g}}BOOKLET
Neither period depends on amplitude. Mass–spring: no gg. Pendulum: no mass, small angles only (about 10∘10^{\circ} or less), ll to the centre of the bob.LEARN
Kinetic energy is maximum at equilibrium; potential energy is maximum at the extremes. Without friction the total is constant, and each energy repeats every T2\frac{T}{2}.LEARN

3.2 ◆Phase and the equations of simple harmonic motion

The phase angle ϕ\phi fixes where an oscillator is, and which way it moves, at t=0t = 0. Phase angles are in radians; a full cycle is 2π2\pi.LEARN
x=x0sin⁡(ωt+ϕ)x = x_0\sin(\omega t + \phi)BOOKLET
v=ωx0cos⁡(ωt+ϕ)v = \omega x_0\cos(\omega t + \phi)BOOKLET
v=±ωx02−x2v = \pm\omega\sqrt{x_0^2 - x^2}BOOKLET
vmax=ωx0v_\text{max} = \omega x_0 at equilibrium; maximum acceleration ω2x0\omega^2 x_0 at the extremes. Velocity leads displacement by π2\frac{\pi}{2}; acceleration is in antiphase with it.LEARN
ET=12mω2x02E_\text{T} = \tfrac{1}{2}m\omega^2x_0^2BOOKLET
Ep=12mω2x2E_\text{p} = \tfrac{1}{2}m\omega^2x^2BOOKLET
Ek=ET−EpE_\text{k} = E_\text{T} - E_\text{p}. Without damping ETE_\text{T} is constant, and EkE_\text{k} and EpE_\text{p} each repeat every T2\frac{T}{2}.LEARN

3.3Travelling waves

A travelling wave transfers energy by oscillations, with no net transfer of matter.LEARN
Transverse: oscillations perpendicular to the direction of energy transfer. Longitudinal: oscillations parallel to it, with compressions and rarefactions.LEARN
v=fλ=λTv = f\lambda = \frac{\lambda}{T}BOOKLET
The source sets the frequency. When a wave changes medium, its frequency stays the same; its speed and wavelength change.LEARN
Sound is a longitudinal mechanical wave of pressure changes. It needs a medium, and travels at about 340 m s−1\pu{340 m s-1} in air.LEARN
Electromagnetic waves are transverse oscillations of electric and magnetic fields. All travel at c=3.00⋅108 m s−1c = \pu{3.00e8 m s-1} in a vacuum.LEARN
In order of increasing wavelength: gamma rays, X-rays, ultraviolet, visible (400 to 700 nm), infrared, microwaves, radio waves.LEARN

3.4Reflection, refraction and Snell's law

Wavefronts join points in phase and are one wavelength apart; rays show the direction of travel and are perpendicular to wavefronts.LEARN
Angles at a boundary are measured from the normal. Reflection: angle of incidence = angle of reflection.LEARN
On refraction the frequency stays the same; speed and wavelength change together. Slowing down bends a ray towards the normal.LEARN
n=cvn = \frac{c}{v}LEARN
n1n2=sin⁡θ2sin⁡θ1=v2v1\frac{n_1}{n_2} = \frac{\sin\theta_2}{\sin\theta_1} = \frac{v_2}{v_1}BOOKLET
sin⁡C=n2n1\sin C = \frac{n_2}{n_1}LEARN
Total internal reflection needs light heading into a smaller refractive index at an angle of incidence greater than CC.LEARN
Diffraction is most noticeable when the gap or obstacle is about one wavelength across; it does not change the wavelength.LEARN

3.5Superposition and double-slit interference

Superposition: overlapping waves or pulses add their displacements, with signs, then carry on unchanged.LEARN
Coherent sources have the same frequency and a constant phase difference; a steady interference pattern needs them.LEARN
Δϕ=Δxλ×2π\Delta\phi = \frac{\Delta x}{\lambda} \times 2\piLEARN
For sources in phase: constructive interference when path difference =nλ= n\lambda, destructive when path difference =(n+12)λ= \left(n + \tfrac{1}{2}\right)\lambda.BOOKLET
s=λDds = \frac{\lambda D}{d}BOOKLET
Fringes spread out for larger λ\lambda or DD and smaller dd. White light gives a white central fringe with coloured fringes either side, each with violet nearest the centre and red furthest out.LEARN
Dark fringes do not destroy energy; it moves to the bright fringes.LEARN

3.6 ◆Single-slit diffraction and diffraction gratings

θ=λb\theta = \frac{\lambda}{b}BOOKLET
Single slit: central maximum twice as wide as the others; θ\theta to the first minimum is in radians.LEARN
A narrower slit or a longer wavelength gives a wider pattern; a narrower slit also makes it dimmer.LEARN
Double slit: fringes λd\frac{\lambda}{d} apart sit under a single-slit envelope with its first minimum at λb\frac{\lambda}{b}. A fringe on an envelope minimum is missing.LEARN
nλ=dsin⁡θn\lambda = d\sin\thetaBOOKLET
More slits at the same dd: maxima at the same angles, but sharper and brighter. dd is one over the number of lines per metre.LEARN
White light on a grating: a white central maximum, then spectra with violet inside and red outside. Higher orders are wider and overlap.LEARN
Highest order: the whole number below dλ\frac{d}{\lambda} (an order exactly at dλ\frac{d}{\lambda} is at 90∘90^\circ and never reaches a screen). Total maxima =2nmax+1= 2n_\text{max} + 1.LEARN

3.7Standing waves

A standing wave forms when two waves with the same frequency, wavelength, amplitude and speed travel in opposite directions and superpose. It transfers no net energy.LEARN
Nodes have zero amplitude and antinodes the largest. Neighbouring nodes are λ2\frac{\lambda}{2} apart; a node and the next antinode are λ4\frac{\lambda}{4} apart.LEARN
Points between neighbouring nodes are in phase. Points on opposite sides of a node are in antiphase (π\pi rad).LEARN
Fixed string end or closed pipe end: node. Free string end or open pipe end: antinode.LEARN
Matching ends: λn=2Ln\lambda_n = \frac{2L}{n}, fn=nv2Lf_n = \frac{nv}{2L}, n=1,2,3,…n = 1, 2, 3, \ldotsLEARN
Unlike ends: λn=4Ln\lambda_n = \frac{4L}{n}, fn=nv4Lf_n = \frac{nv}{4L}, n=1,3,5,…n = 1, 3, 5, \ldots (odd harmonics only).LEARN

3.8Resonance and damping

Natural frequency: the frequency of free oscillation. A forced oscillation, once steady, has the driving frequency.LEARN
Resonance: the amplitude of a forced oscillation is largest when the driving frequency equals (or is close to) the natural frequency.LEARN
At resonance the driving force pushes in the direction of motion throughout each cycle, so the energy transfer per cycle is greatest; the amplitude stops growing when energy lost per cycle equals energy supplied per cycle.LEARN
More damping: lower, broader resonance peak at a slightly lower frequency; heavy damping gives no peak.LEARN
Light damping: oscillates with decreasing amplitude. Critical: back to equilibrium in the shortest time without oscillating. Heavy: no oscillation, slow return.LEARN

3.9The Doppler effect

Doppler effect: relative motion along the line joining source and observer changes the observed frequency. Approaching gives a higher frequency, moving apart a lower one.LEARN
Moving source: wavefronts bunch up ahead and spread out behind. Moving observer: same wavelength, met more or less often.LEARN
Sound: it matters which one moves. Light: only the relative velocity matters.LEARN
Δff=Δλλ≈vc(v≪c)\frac{\Delta f}{f} = \frac{\Delta \lambda}{\lambda} \approx \frac{v}{c} \quad (v \ll c)BOOKLET
Redshift (longer wavelength): moving away. Blueshift (shorter wavelength): moving towards. Every line shifts by the same fraction.LEARN
Rotation: one edge redshifted, the other blueshifted; half the difference gives the rotation speed.LEARN
HL: f′=f vv±usf' = f\,\frac{v}{v \pm u_\text{s}} (moving source) and f′=f v±uovf' = f\,\frac{v \pm u_\text{o}}{v} (moving observer). Choose the sign so that approaching raises f′f'.BOOKLET

Which method when

Is this motion simple harmonic? → check that the acceleration (or resultant force) is proportional to the displacement and directed towards equilibrium, a=−ω2xa = -\omega^2 x (3.1)LEARN
Period of a mass on a spring or a pendulum → T=2πmkT = 2\pi\sqrt{\frac{m}{k}} (no gg) or T=2πlgT = 2\pi\sqrt{\frac{l}{g}} (no mass, small angles only); from timings, divide the time for many oscillations by their number (3.1)LEARN
Wave speed from graphs → read λ\lambda off a displacement–position graph and TT off a displacement–time graph, then v=fλ=λTv = f\lambda = \frac{\lambda}{T} (3.3)LEARN
Wave crossing a boundary → ff stays the same; use n1sin⁡θ1=n2sin⁡θ2n_1\sin\theta_1 = n_2\sin\theta_2 with angles from the normal; heading into a smaller nn beyond CC, where sin⁡C=n2n1\sin C = \frac{n_2}{n_1}, gives total internal reflection (3.4)LEARN
Maximum or minimum at a point from two in-phase coherent sources → work out path differenceλ\frac{\text{path difference}}{\lambda}: a whole number is constructive, a whole number plus a half is destructive (3.5)LEARN
Wavelength or fringe spacing from a double slit → s=λDds = \frac{\lambda D}{d} with every length in metres; take ss as the distance across many fringes divided by the number of gaps (3.5)LEARN
Harmonic frequency of a string or pipe → sketch it first: fixed or closed end is a node, free or open end an antinode; matching ends fn=nv2Lf_n = \frac{nv}{2L} for every nn, unlike ends fn=nv4Lf_n = \frac{nv}{4L} for odd nn only (3.7)LEARN
Speed of a star or galaxy from a spectral line → v=c Δλλv = c\,\frac{\Delta\lambda}{\lambda} with Δλ\Delta\lambda = observed minus emitted, valid for v≪cv \ll c; redshift means moving away, blueshift moving towards (3.9)LEARN

◆Which method when

Displacement or velocity at a given time → find ϕ\phi from the starting position and direction, then x=x0sin⁡(ωt+ϕ)x = x_0\sin(\omega t + \phi) and v=ωx0cos⁡(ωt+ϕ)v = \omega x_0\cos(\omega t + \phi) in radian mode; at a given position instead, v=±ωx02−x2v = \pm\omega\sqrt{x_0^2 - x^2} (3.2)LEARN
Energy of an oscillator → ET=12mω2x02E_\text{T} = \frac{1}{2}m\omega^2x_0^2 with x0x_0 in metres, Ep=12mω2x2E_\text{p} = \frac{1}{2}m\omega^2x^2, then Ek=ET−EpE_\text{k} = E_\text{T} - E_\text{p} (3.2)LEARN
Single slit or grating → first single-slit minimum at θ=λb\theta = \frac{\lambda}{b} in radians; grating maxima at nλ=dsin⁡θn\lambda = d\sin\theta with d=1lines per metred = \frac{1}{\text{lines per metre}}; highest order is the whole number below dλ\frac{d}{\lambda} (3.6)LEARN
Sound from a moving source or heard by a moving observer → f′=f vv±usf' = f\,\frac{v}{v \pm u_\text{s}} or f′=f v±uovf' = f\,\frac{v \pm u_\text{o}}{v}, speeds relative to the air; choose the sign so that approaching raises f′f' (3.9)LEARN
Follows the IB Physics guide (first assessment 2025). Not affiliated with the IB.