Kinematics with vectors
In a minute
When something moves, its changes with time. With constant , tells you where it is at any moment, so you can find when two objects meet and when they are closest. When the velocity changes, you differentiate or integrate each component, which covers projectiles and circular motion.
You'll be able to
- Model motion with constant velocity in 2D and 3D using : find positions, times, and , and describe the path.
- Use the to decide whether two objects meet, where their paths cross, and when and how closely they approach.
- Write the position of an object that starts time units later as .
- Find velocity from position by differentiating each component, and position from velocity by integrating, with a known position to fix the constants.
- Model projectile and circular motion as special cases of variable velocity, and interpret the results in context.
Before you start3 quick questions on what this builds on
Revise first: 1.13 Complex numbers in polar and exponential form, 3.3 Applied triangle trigonometry, 3.10 Vectors in 2D and 3D, 3.11 Vector equations of lines, 5.5 Antidifferentiation, definite integrals and area, 5.9 Differentiation rules and related rates and 5.11 Standard integrals and substitution
Motion with constant velocity
In 3.11 the parameter picked out a point on a line. Make the parameter time, , and the line becomes a route: each value of gives where the object is at that moment.
With constant velocity , an object has in every unit of time, so after time it is from its start.
is the position vector at and is the position at time . This is the booklet's with , in 2D or 3D.
The speed is , so in time the object travels . Positions in km and in hours give a speed in .
With east and north, gives the bearing of travel: sketch it, find its angle from north with , and measure clockwise.
Try it first, then reveal one step at a time.
- (a) At the ferry is at the port, so the port is .
- (b) , so the speed is .
- (c) is the time since 07:30, so 09:00 is .
- , so the ferry is at .
- Interpret: it is 26.5 km east and 1 km south of the lighthouse, having travelled km.
Try it first, then reveal one step at a time.
- (a) The velocity is constant, so the path is a straight line through .
- Its horizontal velocity is east and north, a bearing of .
- The -component, , means it loses 60 m of height each minute.
- (b) Work in km: 300 m is km. From the -component, , so .
- Then and .
- Interpret: after 25 minutes the glider is at . A real glider's sink rate varies, so the model only suits a short time.
Two moving objects
With two moving objects, use the same time in both position vectors.
Two objects meet only if for some value of , in every component. Their paths can cross without a collision if they reach the crossing at different times.
To find where paths cross, give the second object its own time letter and solve . In 3D, check the third component too.
Try it first, then reveal one step at a time.
- (a) To meet, both coordinates must agree at the same . From : , so .
- At , A's -coordinate is but B's is . The -coordinates differ, so the hikers are never in the same place at the same time.
- (b) Use for B's time: .
- From : . Substitute into : , so , giving and .
- The point is . Check: .
- Interpret: A passes at 12:00 and B at 13:00.
When objects don't meet, a question may ask how close they come. Write as one vector, then . Find the minimum of over the allowed times, usually , and give the time and distance.
Try it first, then reveal one step at a time.
- (a) .
- (b) Write down the distance you will minimise: . This line earns the method mark.
- Graph for and find its minimum: and .
- minutes, so they are closest at 07:28.
- Interpret: they start km apart and pass within about 2.77 km at 07:28.
By hand: is smallest when is, and has its vertex at . If the vertex is at a negative , the objects separate for all , so they are closest at .
If a motion starts at , the same motion started time units later is , for .
At , : the start. It is the same translation as a (1.13). For constant velocity, is now the position at .
Try it first, then reveal one step at a time.
- (a) The boat leaves O at , so for . At this gives O, as it should.
- (b) 14:00 is . The yacht is then at .
- They meet there, so , giving .
- Speed: .
- Interpret: the coastguard boat needs about , faster than the yacht's , because it starts 45 minutes later.
Motion with variable velocity
When a velocity component depends on , the object speeds up, slows down or turns. Treat each component on its own: and are separate functions of .
Differentiate each component of to get , and of to get the acceleration .
Velocity components are written and , or and (the dot means ).
Going back, integrate each component of , with its own constant. A known position fixes both constants.
The speed is . The object moves parallel to the -axis when and , and parallel to the -axis when and .
Try it first, then reveal one step at a time.
- Integrate each component, each with its own constant: and .
- At the boat is at , so and .
- So . Check: differentiating gives back , and gives .
- Interpret: at , so the boat is then at heading due north, before curving back west.
Try it first, then reveal one step at a time.
- (a) Differentiate each component: .
- (b) Parallel to the -axis needs : , so or .
- Check: and are not , so at both times it flies due east.
- (c) , so the speed is .
- Interpret: at it moves east and a little south at about .
Projectile and circular motion
A projectile is launched and then moves under gravity alone. With horizontal and up, in metres and seconds, and ignoring air resistance, .
Integrate twice, with launch velocity and launch point :
Only the vertical velocity changes. For an upward launch (), the highest point is where . With measured from the ground, the object lands when (take the positive root).
A launch speed at angle above the horizontal gives and .
Try it first, then reveal one step at a time.
- (a) Integrate the acceleration, using the launch velocity at : .
- Integrate again, starting from : .
- (b) At the highest point , so s. Then m.
- (c) Write down the equation for landing: . The GDC gives or ; reject the negative time.
- Horizontal distance: m.
- Interpret: about 44.5 m. Air resistance would make the real distance shorter.
An object moving round a circle of radius at a steady rate has a position such as , with in radians per unit time. Its distance from the origin is , which never changes.
Differentiating gives , so the speed is , also constant. One lap takes .
A circle centred at C adds C's position vector. Swapping and changes where it starts and which way it turns; replacing by only changes when it passes each point.
Try it first, then reveal one step at a time.
- (a) Subtract the point : .
- Its magnitude is , using . The capsule stays 30 m from , so it moves on a circle with centre and radius 30 m.
- (b) Differentiate: , so the speed is at every moment.
- (c) Write down the equation: . With the GDC in radians, the first solution with is .
- Check: , so .
- Interpret: a lap takes minutes, and the capsule first reaches 50 m about 7.05 minutes after the lowest point.
Common mistakes
- Treating crossing paths as a collision. Objects meet only if they are at the same point at the same time, so one value of must give every coordinate of both.
- Using clock time as . If is in hours after 06:00, then 07:30 is , and a late start at 06:45 needs .
- Leaving the GDC in degrees. Wherever or appears, is in radians; a degree-mode answer earns no accuracy marks.
- Integrating without constants, or with one shared constant. Each component needs its own constant, found from the known position.
- Rounding the time of closest approach and then using it. Keep the GDC's full value of , and round only the final distance or clock time.
Exam tips
- “Find the least distance”: write down as an expression before the GDC's minimum, and state the minimum distance itself with units, not just the time.
- “Describe the path”: make statements about the path, not the speed. For example: a straight line, its direction or bearing, a constant height, or a point it passes through.
- “Show that” two objects never meet: find from one coordinate, substitute it into the other, and say that the coordinates differ at that time.
- “Show that” motion is circular: find the distance from the centre, simplify with , and state that it is constant.
Key takeaways
Practise this
19 past-paper questions on Kinematics with vectors in the AI HL bank, each with a mark scheme and a worked explanation.