IGCSE Physics 0625 · Paper practice

Paper 3 past paper questions

Every archived Physics 0625 Paper 3 question in one place. Practise them by topic, then sit a full paper under timed conditions.

Most-tested topicsMotion, forces and energy 216Earlier syllabus topics 146Electricity and magnetism 132Waves 106Thermal physics 75Nuclear physics 54

Course route
Sort questions

You’re practising 2019–2021 papers. The 2022–2026 papers, including 2026, need a plan.

Unlock from $6/mo
24 free questions

2021 MarchPaper 3Question 1Component 32Variant 211 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

1 Fig. 1.1 shows a box dropped from an aeroplane. The box contains supplies. A parachute is attached to the box. The parachute is opened when the time is 6.0 s. box containing supplies parachute Fig. 1.1 The graph in Fig. 1.2 shows the vertical speed of the box as it falls. 0 0 2.0 4.0 6.0 8.0 time / s 10.0 12.0 14.0 16.0 18.0 10 20 30 40 50 speed m / s Fig. 1.2 (a) State and explain what happens to the kinetic energy of the box during the first 6.0 s of its descent.… [2] (b) State and explain what happens to the gravitational potential energy of the box during the first 6.0 s.… [2] (c) (i) Use the graph in Fig. 1.2 to determine the speed of the object when the object is moving with a constant speed. speed of the object at constant speed = … m / s [2] (ii) State the size of the resultant vertical force on the box when it is falling at a constant speed. … [1] (d) Use the graph in Fig. 1.2 to determine the distance travelled by the box during the first 6.0 s. distance travelled in first 6.0 s = … m [3] (e) Without calculation, describe how Fig. 1.2 shows that the deceleration of the box is greater than the acceleration of the box.… [1] [Total: 11]

2021 JunePaper 3Question 1Component 31Variant 110 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

1 Fig. 1.1 shows a speed–time graph for a car. 0 0 10 20 30 40 50 time / s 60 70 80 90 100 2 4 6 speed m / s 8 10 Fig. 1.1 (a) (i) Describe the motion of the car from 0 to 50 s, as shown in Fig. 1.1. … [1] (ii) Describe the motion of the car from 50 s to 90 s, as shown in Fig. 1.1.… [1] (iii) Calculate the distance travelled by the car between 50 s and 90 s. distance travelled = … m [3] (b) A motorcycle travels at a constant speed. (i) The motorcycle travels 710 m in 87 s. Calculate the speed of the motorcycle and show that it is close to 8 m / s. [3] (ii) The motorcycle in part (b)(i) travels at a constant speed for 87 s. On Fig. 1.1, draw the speed–time graph for the motorcycle. [2] [Total: 10]

2021 JunePaper 3Question 1Component 32Variant 27 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

1 Fig. 1.1 shows the core of a transformer. It is made from thin sheets of iron. 50 mm thin sheet of iron core of transformer Fig. 1.1 (not to scale) (a) There are 200 sheets of iron in the core of the transformer. The thickness of the core is 50 mm. Calculate the average thickness of one sheet of iron. average thickness of one sheet = … mm [3] (b) The density of the iron in the core is 7.65 g / cm3. The mass of the core is 1377 g. Calculate the volume of the core. volume = … cm3 [3] (c) State the name of a device used to measure mass. … [1] [Total: 7]

2021 JunePaper 3Question 1Component 33Variant 39 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

1 Fig. 1.1 shows the speed–time graph for a car travelling along a road. 0 0 20 40 time / s 60 80 100 120 4 8 12 speed m / s 16 2 6 10 14 18 Fig. 1.1 (a) Determine the distance travelled by the car between 30 s and 60 s. distance travelled = … m [3] (b) The distance travelled by the car between 60 s and 110 s is 460 m. Calculate the average speed of the car between 60 s and 110 s. average speed = … m / s [4] (c) Describe the motion of the car between 30 s and 60 s. … [1] (d) Describe the motion of the car between 60 s and 80 s. … [1] [Total: 9]

2021 NovemberPaper 3Question 1Component 31Variant 18 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

1 A student uses a ruler to measure the length of a piece of wire, as shown in Fig. 1.1. 0 cm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 wire Fig. 1.1 (not to scale) (a) Use the ruler in Fig. 1.1 to determine the length of the piece of wire. length of wire = … cm [2] (b) The student folds the piece of wire and measures its mass. (i) State the name of an instrument the student can use to measure mass. … [1] (ii) The student determines the volume of the wire. He uses a measuring cylinder part‑filled with water and places the wire in it, as shown in Fig. 1.2. 50 40 30 20 10 cm3 water water 50 40 30 20 10 cm3 folded wire folded wire Fig. 1.2 Determine the volume of the wire by using information in Fig. 1.2. volume of wire = … cm3 [2] (c) The student measures the mass and the volume of a piece of metal. The mass of the piece of metal is 93.6 g and its volume is 12 cm3. Calculate the density of the metal. density of metal = … g / cm3 [3] [Total: 8]

2021 NovemberPaper 3Question 1Component 32Variant 29 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

1 A cyclist travels to a friend’s house. Fig. 1.1 shows the distance–time graph of the journey. 0 100 200 300 400 time / s 500 0 200 400 600 800 1000 distance / m A B C D E Fig. 1.1 (a) Determine the distance travelled by the cyclist between points C and E. distance travelled = … m [2] (b) Describe the motion, if any, of the cyclist between points B and C. … [1] (c) State the section, AB, BC, CD or DE, of the graph in which the speed of the cyclist is the fastest. Give a reason for your answer. section of graph … reason … [2] (d) Calculate the average speed of the cyclist between points A and E. Include the unit in your answer. average speed = … unit … [4] [Total: 9]

2021 NovemberPaper 3Question 1Component 33Variant 34 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

1 Fig. 1.1 shows a plant pot falling from an upstairs balcony. The plant pot has a constant acceleration as it falls. balcony plant pot ground level Fig. 1.1 (a) State the cause of the acceleration. … [1] (b) Fig. 1.2 shows the speed–time graph for the falling plant pot. The plant pot hits the ground at time = 1.8 s. 0 0 0.4 0.8 1.2 time / s speed m / s 1.6 2.0 4 8 12 16 Fig. 1.2 Determine the height of the balcony above the ground using the information shown in Fig. 1.2. height = … m [3] [Total: 4]

2021 MarchPaper 3Question 2Component 32Variant 27 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

2 Fig. 2.1 shows a measuring cylinder containing water. Fig. 2.2 shows the same measuring cylinder after a stone has been lowered into it. 90 100 cm3 0 10 20 30 40 50 60 70 80 90 100 cm3 0 10 20 30 40 50 60 70 80 stone Fig. 2.1 Fig. 2.2 (a) Calculate the volume of the stone. volume = … cm3 [2] (b) Another stone has a mass of 98.4 g. The volume of this stone is 41.0 cm3. Calculate the density of the stone. density = … g / cm3 [3] (c) The stone with a mass of 98.4 g has a weight of 0.984 N. Explain the difference between mass and weight.… [2] [Total: 7]

2021 JunePaper 3Question 2Component 31Variant 18 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

2 A liquid-in-glass thermometer contains mercury. (a) The mass of the mercury in the thermometer is 12 g. (i) Calculate the weight of the mercury. weight of mercury = … N [3] (ii) The 12 g of mercury has a volume of 0.88 cm3. Calculate the density of mercury. density of mercury = … g / cm3 [3] (b) The mercury in the thermometer expands when its temperature rises. (i) State what happens to the mass of the mercury when its temperature rises. Tick (3) one box. mass decreases mass stays the same mass increases [1] (ii) State what happens to the density of the mercury when its temperature rises. Tick (3) one box. density decreases density stays the same density increases [1] [Total: 8]

2021 JunePaper 3Question 2Component 32Variant 211 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

2 Fig. 2.1 shows how the speed of a car varies between 0 and 60.0 s. 0 0 10.0 20.0 time / s 30.0 40.0 50.0 60.0 10.0 20.0 30.0 speed m / s 40.0 Fig. 2.1 (a) Determine the speed of the car using information from Fig. 2.1: (i) when the time is 5.0 s speed = … m / s [2] (ii) when the car is moving with a constant speed. speed = … m / s [1] (b) Describe how the speed of the car changes between 30.0 s and 60.0 s. … [2] (c) Determine the distance travelled by the car between 10.0 s and 30.0 s. distance travelled = … m [3] (d) The total distance travelled by the car in the last 30.0 s is 226 m. Calculate the average speed of the car in the last 30.0 s. average speed = … m / s [3] [Total: 11]

2021 JunePaper 3Question 2Component 33Variant 36 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

2 (a) A scientist has a measuring cylinder, a beaker of sea water and an electronic balance. Describe an experiment to determine the density of the sea water. Include any equations in your answer.… [5] (b) A plank of wood floats on the sea. Explain why the wood floats.… [1] [Total: 6]

2021 NovemberPaper 3Question 2Component 31Variant 110 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

2 A slope is made by resting one end of a plank of wood on a block, as shown in Fig. 2.1. plank block of wood trolley Fig. 2.1 Two students each use a digital stop‑watch to measure the time for a small trolley to roll down the full length of the slope. Fig. 2.2 shows the times on the stop‑watches. 00 : 06 14 min sec 1 100 student 1 00 : 06 28 min sec 1 100 student 2 time = … s time = … s Fig. 2.2 (a) (i) On the line next to each stop‑watch, write the time it shows. [1] (ii) Calculate the average time for the trolley to roll down the slope. average time = … s [2] (iii) The students want the same trolley to take more time to roll down the plank. Suggest how the students alter the arrangement in Fig. 2.1. … [1] (b) A different trolley travels 1.2 m down the slope in a time of 7.8 s. Calculate the average speed of the trolley. average speed = … m / s [3] (c) The trolley travels down a different slope. Fig. 2.3 shows the speed–time graph. 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.0 2.0 3.0 time / s 4.0 speed m / s Fig. 2.3 Calculate the distance travelled by the trolley between time = 0 and time = 4.0 s. distance travelled = … m [3] [Total: 10]

2021 NovemberPaper 3Question 2Component 32Variant 27 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

2 (a) A coin collector has 19 identical coins, as shown in Fig. 2.1. Fig. 2.1 Fig. 2.2 shows one of the coins in the coin collector’s hand. Fig. 2.2 The coin collector wants to check the thickness of one coin. She has a 30 cm ruler. Describe how she can use the 30 cm ruler to determine the thickness of one coin accurately. You may include a diagram if you wish.… [3] (b) The coin collector finds another coin. She thinks this coin is made of gold. She performs an experiment to find the coin’s density. She obtains the following results: mass of coin = 52.5 g volume of coin = 5.4 cm3 (i) Show that the density of this coin is about 10 g / cm3. [3] (ii) The density of liquid mercury is 13.6 g / cm3. State and explain whether the coin in (b)(i) floats on liquid mercury.… [1] [Total: 7]

2021 NovemberPaper 3Question 2Component 33Variant 37 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

2 Fig. 2.1 shows a pea plant. One of the pods is open, showing the peas inside. pea plant peas pea pods Fig. 2.1 (a) A food scientist needs to find the average diameter of a pea. She places 14 peas against a ruler, as shown in Fig. 2.2. Fig. 2.2 Use information from Fig. 2.2 to determine the average diameter of one pea. average diameter of one pea = … cm [3] (b) The food scientist needs to find the average density of some peas. She uses the following values: mass of peas = 183 g volume of peas = 250 cm3. Calculate the average density of these peas. average density = … g / cm3 [3] (c) A different variety of pea has a density of 0.89 g / cm3. One pea of this variety is placed in salt water. The density of the salt water is 1.02 g / cm3. State whether this pea floats or sinks in the salt water. Give a reason for your answer. answer … reason … [1] [Total: 7]

2021 MarchPaper 3Question 3Component 32Variant 27 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

3 Fig. 3.1 shows the forces acting on a uniform balanced beam. The beam is pivoted at its centre. P pivot 6.0 cm 5.2 N 8.1 N 2.0 cm 2.0 cm Fig. 3.1 (a) Calculate the moment of the 5.2 N force about the pivot and show that its value is close to 30 Ncm. [3] (b) The beam is balanced. Calculate force P. force P = … N [4] [Total: 7]

2021 JunePaper 3Question 3Component 31Variant 16 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

3 A plank balances horizontally on a log of wood, which acts as a pivot. (a) A girl sits on one end of the plank, and her brother pushes down on the other end to make the plank balance horizontally. Fig. 3.1 shows the arrangement. pivot 1.2 m weight = 404 N F 1.6 m Fig. 3.1 (not to scale) Calculate the moment of the girl’s weight about the pivot and show that it is close to 480 N m. [3] (b) The plank balances horizontally when the boy pushes down with a force F at a distance of 1.6 m from the pivot. Calculate the size of force F. force F = … N [3] [Total: 6]

2021 JunePaper 3Question 3Component 32Variant 27 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

3 Fig. 3.1 shows a barrier used at a car park. The beam can be raised and lowered by a man rotating it about its pivot. heavy weight W pivot beam 150 N 1.8 m Fig. 3.1 (not to scale) (a) The weight of the beam is 150 N. This acts at a distance of 1.8 m from the pivot as shown in Fig. 3.1. Calculate the moment of the weight of the beam about the pivot. Include the correct unit in your answer. moment of weight of beam = … unit … [4] (b) When the weight W of the heavy weight acts at a distance of 0.6 m from the pivot, the barrier is horizontal and balanced as shown in Fig. 3.1. The man raises the barrier and the heavy weight slips to a distance of 0.8 m from the pivot. This causes a problem for the man trying to lower the barrier. Describe and explain the problem this causes for the man lowering the barrier.… [3] [Total: 7]

2021 JunePaper 3Question 3Component 33Variant 310 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

3 (a) A girl and her brother sit on opposite sides of a see-saw as shown in Fig. 3.1. 1.9 m 1.2 m 240 N W pivot brother girl Fig. 3.1 (i) Calculate the girl’s moment about the pivot and show that it is close to 460 N m. [3] (ii) The see-saw is balanced horizontally. Calculate the weight W of the brother. W = … N [3] (b) The weight of the girl in Fig. 3.1 is 240 N. Calculate the mass of the girl. Include the unit in your answer. mass of girl = … unit … [4] [Total: 10]

2021 NovemberPaper 3Question 3Component 31Variant 16 marks
Earlier syllabus topicsEarlier syllabus content
Loading original question

3 (a) A student determines the centre of mass of a piece of card. Fig. 3.1 shows the equipment the student uses. A C B pin card cotton thread weight stand cork ruler Fig. 3.1 Describe how the student determines the centre of mass of the card using the equipment in Fig. 3.1.… [3] (b) Another card is pivoted at point P. The weight of the card is 1.4 N and acts through a point 20 cm from P. Fig. 3.2 shows the arrangement. 20 cm 1.4 N card pivot P Fig. 3.2 Calculate the moment of the weight of the card about point P. moment of weight = … N cm [3] [Total: 6]

2021 NovemberPaper 3Question 3Component 32Variant 24 marks
Motion, forces and energyForcesEffects of forces
Loading original question

3 Fig. 3.1 shows the vertical forces acting on a toy rocket as it leaves the ground. upward force = 70 N smooth surface weight of rocket = 15 N Fig. 3.1 (a) Calculate the size of the resultant vertical force on the rocket. resultant force = … N [2] (b) Explain why the top of the rocket is pointed and has a smooth surface.… [2] [Total: 4]

Full Paper 3 past papers with mark schemes

Paper 3: quick facts

Which topics come up most in IGCSE Physics 0625 Paper 3?

The most-tagged topics in IGCSE Physics 0625 Paper 3 are Motion, forces and energy (216), Earlier syllabus topics (146) and Electricity and magnetism (132), out of 583 past-paper questions from 2019-2026. These are archive counts, not a prediction, and a question can carry more than one topic.

Are the IGCSE Physics 0625 Paper 3 questions free?

234 of the 583 IGCSE Physics 0625 Paper 3 questions are free to practise. The other 349 need a plan for IGCSE Physics 0625, from $6 a month.

Do the IGCSE Physics 0625 Paper 3 questions have answers?

Yes. Each IGCSE Physics 0625 Paper 3 question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.