IB Chemistry SL · Topic practice

Matter, amounts and stoichiometry past paper questions

Practise translating between masses, moles, formulae and balanced equations. Keep units visible and check that each ratio comes from the equation in the question.

Appears inPaper 1 169Paper 2 68Paper 3 37

Sort questions

You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.

Unlock from $6/mo
24 free questions

2020 NovemberPaper 1Question 1Component P1TZ01 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

1. What is the molar mass, in g mol−1, of a compound if 0.200 mol of the compound has a mass of 13.2 g? A. 66.0 B. 66 C. 26.4 D. 26

2020 NovemberPaper 1Question 2Component P1TZ01 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

2. What is the number of carbon atoms in 12 g of ethanoic acid CH3COOH, Mr = 60? A. 0.20 B. 2.0 C. 1.2 × 1023 D. 2.4 × 1023

2020 NovemberPaper 1Question 3Component P1TZ01 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

3. Which of these molecular formulae are also empirical formulae? I. C2H6O II. C2H4O2 III. C5H12 A. I and II only B. I and III only C. II and III only D. I, II and III

2020 NovemberPaper 1Question 4Component P1TZ01 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

Turn over 4. Which volume of ethane gas, in cm3, will produce 40 cm3 of carbon dioxide gas when mixed with 140 cm3 of oxygen gas, assuming the reaction goes to completion? 2C2H6 (g) + 7O2 (g) → 4CO2 (g) + 6H2O (g) A. 10 B. 20 C. 40 D. 80

2020 NovemberPaper 1Question 9Component P1TZ01 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

9. Which formula is correct? A. NH4PO4 B. (NH4)2PO4 C. (NH4)3PO4 D. (NH4)3(PO4)2

2020 NovemberPaper 2Question 1Component P2TZ028 marks
Atomic structure and periodicityNuclear atom, isotopes and mass spectraElectron configurations and emission spectraPeriodic table and trendsThe mole and reacting quantities
Loading original question

1. Chlorine undergoes many reactions. (a) (i) State the full electron configuration of the chlorine atom. [1] (ii) State, giving a reason, whether the chlorine atom or the chloride ion has a larger radius. [1] (iii) Outline why the chlorine atom has a smaller atomic radius than the sulfur atom. [2] (This question continues on the following page) Turn over (Question 1 continued) (iv) The mass spectrum of chlorine is shown. m/z Relative abundance 60 50 70 30 20 10 0 40 Outline the reason for the two peaks at m/z = 35 and 37. [1] (v) Explain the presence and relative abundance of the peak at m/z = 74. [2] (b) 2.67 g of manganese(IV) oxide was added to 200.0 cm3 of 2.00 mol dm−3 HCl. MnO2 (s) + 4HCl (aq) → Cl2 (g) + 2H2O (l) + MnCl2 (aq) (i) Calculate the amount, in mol, of manganese(IV) oxide added. [1] (This question continues on the following page) (Question 1 continued) (ii) Determine the limiting reactant, showing your calculations. [2] (iii) Determine the excess amount, in mol, of the other reactant. [1] (iv) Calculate the volume of chlorine, in dm3, produced if the reaction is conducted at standard temperature and pressure (STP). Use section 2 of the data booklet. [1] (v) State the oxidation state of manganese in MnO2 and MnCl2. [2] MnO2: MnCl2: (vi) Deduce, referring to oxidation states, whether MnO2 is an oxidizing or reducing agent. [1] (This question continues on the following page) Turn over (Question 1 continued) (c) Chlorine gas reacts with water to produce hypochlorous acid and hydrochloric acid. Cl2 (g) + H2O (l)  HClO (aq) + HCl (aq) (i) Hypochlorous acid is considered a weak acid. Outline what is meant by the term weak acid. [1] (ii) State the formula of the conjugate base of hypochlorous acid. [1] (iii) Calculate the concentration of H+ (aq) in a HClO (aq) solution with a pH = 3.61. [1] (d) (i) State the type of reaction occurring when ethane reacts with chlorine to produce chloroethane. [1] (ii) Predict, giving a reason, whether ethane or chloroethane is more reactive. [1] (This question continues on the following page) (Question 1 continued) (iii) Write the equation for the reaction of chloroethane with a dilute aqueous solution of sodium hydroxide. [1] (iv) Deduce the nucleophile for the reaction in d(iii). [1] (v) Ethoxyethane (diethyl ether) can be used as a solvent for this conversion. Draw the structural formula of ethoxyethane. [1] (vi) Deduce the number of signals and their chemical shifts in the 1H NMR spectrum of ethoxyethane. Use section 27 of the data booklet. [2] (This question continues on the following page) (Question 1 continued) (e) CCl2F2 is a common chlorofluorocarbon, CFC. (i) Calculate the percentage by mass of chlorine in CCl2F2. [2] (ii) Comment on how international cooperation has contributed to the lowering of CFC emissions responsible for ozone depletion. [1]

2020 NovemberPaper 3Question 1Component P3TZ05 marks
Measurement, data and practical workExperimental design, safety and evaluationParticles, states, mixtures and separation
Loading original question

1. In order to determine the oil content of different types of potato crisps (chips), a student weighed 5.00 g of crushed crisps and mixed them with 20.0 cm3 of non-polar solvent. She assumed all the oil in the crisps dissolved in the solvent. The student then filtered the mixture to remove any solids, and gently heated the solution on a hot plate to evaporate the solvent. She measured the mass of the oil that remained from each type of crisps. (a) Suggest why a non-polar solvent was needed. [1] (b) State one reason why the mixture was not heated strongly. [1] (c) Non-polar solvents can be toxic. Suggest a modification to the experiment which allows the evaporated solvent to be collected. [1] (This question continues on the following page) Turn over (Question 1 continued) (d) Suggest one source of error in the experiment, excluding faulty apparatus and human error, that would lead to the following: [2] Experimental mass greater than actual mass of oil in crisps: Experimental mass lower than actual mass of oil in crisps:

2020 NovemberPaper 3Question 4Component P3TZ012 marks
Bonding, structure and materialsPolymers, materials, alloys and nanotechnologyElectrolysis, batteries and fuel cellsThe mole and reacting quantities
Loading original question

Turn over 4. There has been significant growth in the use of carbon nanotubes, CNT. (a) Explain these properties of carbon nanotubes. [2] Excellent strength: Excellent conductivity: (b) (i) Alloying metals changes their properties. Suggest one property of magnesium that could be improved by making a magnesium–CNT alloy. [1] (Option A continues on the following page) (Option A, question 4 continued) (ii) Pure magnesium needed for making alloys can be obtained by electrolysis of molten magnesium chloride. Iron cathode Gas Inert gas in Molten magnesium Molten magnesium chloride Inert gas out Graphite anode Write the half-equations for the reactions occurring in this electrolysis. [2] Anode: Cathode: (iii) Calculate the theoretical mass of magnesium obtained if a current of 3.00 A is used for 10.0 hours. Use charge (Q) = current (I ) × time (t ) and section 2 of the data booklet. [3] (Option A continues on the following page) Turn over (Option A, question 4 continued) (iv) Suggest a gas which should be continuously passed over the molten magnesium in the electrolytic cell. [1] (c) Zeolites can be used as catalysts in the manufacture of CNT. Explain, with reference to their structure, the high selectivity of zeolites. [2] (d) Experiments have been done to explore the nematic liquid crystal behaviour of CNT. Justify how CNT molecules could be classified as nematic. [1] End of Option A

2020 NovemberPaper 3Question 12Component P3TZ03 marks
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

Turn over 12. Consider the following antacids: Antacid X Antacid Y Active substance Magnesium hydroxide (Mr = 58.32) Calcium carbonate (Mr = 100.09) Mass of active substance in tablet / g 0.200 0.220 Show that antacid X is more effective, per tablet, than antacid Y. [3] (Option D continues on the following page) (Option D continued)

2019 MayPaper 1Question 1Component P1TZ11 mark
Matter, amounts and stoichiometryParticles, states, mixtures and separation
Loading original question

1. Which diagram represents a heterogeneous mixture? A. B. C. D.

2019 MayPaper 1Question 1Component P1TZ21 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

1. How many moles of magnesium hydroxide are produced with 0.50 mol of ammonia? Mg3N2 (s) + 6H2O (l) → 3Mg(OH)2 (aq) + 2NH3 (aq) A. 0.25 B. 0.33 C. 0.75 D. 1.5

2019 NovemberPaper 1Question 1Component P1TZ01 mark
Matter, amounts and stoichiometryThe mole and reacting quantities
Loading original question

1. 0.10 mol of hydrochloric acid is mixed with 0.10 mol of calcium carbonate. 2HCl (aq) + CaCO3 (s) → CaCl2 (aq) + H2O (l) + CO2 (g) Which is correct? Limiting reagent Maximum yield of CO2 / mol A. HCl (aq) 0.10 B. CaCO3 (s) 0.05 C. HCl (aq) 0.05 D. CaCO3 (s) 0.10

2019 MayPaper 1Question 2Component P1TZ11 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

2. What is the sum of the coefficients when the equation is balanced with the smallest whole numbers? __BaCl2 (aq) + __Fe2(SO4)3 (aq) → __FeCl3 (aq) + __BaSO4 (s) A. 4 B. 6 C. 8 D. 9

2019 MayPaper 1Question 2Component P1TZ21 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

2. What is the sum of the integer coefficients when propene undergoes complete combustion? __C3H6 (g) + __O2 (g) → __CO2 (g) + __H2O (l) A. 11 B. 17 C. 21 D. 23

2019 NovemberPaper 1Question 2Component P1TZ01 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

2. What is the sum of the coefficients when the equation is balanced with whole numbers? __MnO2 (s) + __HCl (aq) → __MnCl2 (aq) + __H2O (l) + __Cl2 (g) A. 6 B. 7 C. 8 D. 9

2019 MayPaper 1Question 3Component P1TZ11 mark
Matter, amounts and stoichiometryFormulae and equations
Loading original question

3. What is the empirical formula of a hydrocarbon with 75 % carbon and 25 % hydrogen by mass? A. C3H B. CH2 C. C2H6 D. CH4 Turn over

2019 MayPaper 1Question 3Component P1TZ21 mark
Matter, amounts and stoichiometrySolutions and gases
Loading original question

3. What is the volume of gas when the pressure on 100 cm3 of gas is changed from 400 kPa to 200 kPa at constant temperature? A. 50.0 cm3 B. 100 cm3 C. 200 cm3 D. 800 cm3

2019 NovemberPaper 1Question 3Component P1TZ01 mark
Matter, amounts and stoichiometryParticles, states, mixtures and separation
Loading original question

3. Which is correct? A. Mixtures are either homogeneous or heterogeneous and their chemical properties are an average of the individual component properties. B. Mixtures are never heterogeneous and their chemical properties are an average of the individual component properties. C. Mixtures are either homogeneous or heterogeneous and the components retain their individual chemical properties. D. Mixtures are never homogeneous and the components retain their individual chemical properties. Turn over

2019 MayPaper 1Question 4Component P1TZ11 mark
Matter, amounts and stoichiometrySolutions and gases
Loading original question

4. Which graph would not show a linear relationship for a fixed mass of an ideal gas with all other variables constant? A. P against V B. P against 1 V C. P against T D. V against T

2019 MayPaper 1Question 4Component P1TZ21 mark
Matter, amounts and stoichiometrySolutions and gasesThe mole and reacting quantities
Loading original question

4. What is the concentration, in mol dm−3, of 20.0 g of NaOH (Mr = 40.0) in 500.0 cm3? A. 0.250 B. 0.500 C. 1.00 D. 4.00 Turn over M19/4/CHEMI/SPM/ENG/TZ2/XX

Matter, amounts and stoichiometry: quick facts

How often does Matter, amounts and stoichiometry come up in IB Chemistry SL?

Matter, amounts and stoichiometry is tagged on 274 of the 1,521 IB Chemistry SL past-paper questions on PastPaperPrep (18%), from papers sat 2016-2026. Paper 1 has the most Matter, amounts and stoichiometry questions, with 169. These are archive counts, not a prediction, and a question can carry more than one topic.

Are the IB Chemistry SL Matter, amounts and stoichiometry questions free?

96 of the 274 IB Chemistry SL Matter, amounts and stoichiometry questions are free to practise. The other 178 need a plan for IB Chemistry SL, from $6 a month.

Do the IB Chemistry SL Matter, amounts and stoichiometry questions have answers?

Yes. Each IB Chemistry SL Matter, amounts and stoichiometry question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.

“Every question for that one subtopic I kept failing, in one place.”

Ji-woo P.IB DP Year 2, South Korea