10. Which molecule is most polar? A. CHF3 B. CF4 C. CClF3 D. CCl4
IB Chemistry SL · Topic practice
Bonding, structure and materials past paper questions
Compare structures and bonding to explain observable properties. Strong answers connect the particle-level model to the material behaviour asked about.
Appears inPaper 1 143Paper 2 68Paper 3 78
You’re practising 2016–2020 papers. The 2021–2026 papers, including 2026, need a plan.
Unlock from $6/moTurn over 11. Which combination correctly describes the geometry of the carbonate ion, CO3 2−? Electron domain geometry around C Molecular geometry around C A. Trigonal planar Trigonal pyramidal B. Tetrahedral Trigonal planar C. Trigonal planar Trigonal planar D. Tetrahedral Trigonal pyramidal
12. Which series shows the correct order of metallic bond strength from strongest to weakest? A. Na > K > Rb > Mg B. Mg > Rb > K > Na C. Rb > K > Na > Mg D. Mg > Na > K > Rb
Turn over 2. Compound A is in equilibrium with compound B. OH O A B (a) Predict the electron domain and molecular geometries around the oxygen atom of molecule A using VSEPR. [2] Electron domain geometry: Molecular geometry: (This question continues on the following page) (Question 2 continued) (b) The IR spectrum of one of the compounds is shown: 4500 4000 3500 3000 2500 2000 1500 1000 0.0 0.2 0.4 0.6 0.5 0.3 0.1 0.8 0.7 0.9 Wavenumber / cm–1 Transmittance Deduce, giving a reason, the compound producing this spectrum. [1] (c) Compound A and B are isomers. Draw two other structural isomers with the formula C3H6O. [2] (This question continues on the following page) (Question 2 continued) (d) The equilibrium constant, Kc, for the conversion of A to B is 1.0 × 108 in water at 298 K. Deduce, giving a reason, which compound, A or B, is present in greater concentration when equilibrium is reached. [1]
4. Nickel catalyses the conversion of propanone to propan-2-ol. O OH H2 Ni, heat (a) Outline how a catalyst increases the rate of reaction. [1] (b) Explain why an increase in temperature increases the rate of reaction. [2] (c) Discuss, referring to intermolecular forces present, the relative volatility of propanone and propan-2-ol. [3] (This question continues on the following page) (Question 4 continued) (d) (i) The diagram shows an unlabelled voltaic cell for the reaction Pb2+ (aq) + Ni (s) → Ni2+ (aq) + Pb (s) Label the diagram with the species in the equation. [1] − + v Anode Cathode (ii) Suggest a metal that could replace nickel in a new half-cell and reverse the electron flow. Use section 25 of the data booklet. [1] (iii) Describe the bonding in metals. [2] (iv) Nickel alloys are used in aircraft gas turbines. Suggest a physical property altered by the addition of another metal to nickel. [1]
Turn over 3. Carbon fibre reinforced plastic (CFRP) is a useful composite. Epoxy is a thermoset polymer that is used as a binding polymer when making CFRP. (a) Outline the two distinct phases of this composite. [2] (b) (i) Thermoplastic composites are increasingly replacing thermosets. Suggest one advantage of thermoplastic polymers over thermosets. [1] (ii) Explain how thermoplastics, such as polyvinylchloride, PVC, can be made more flexible by the addition of phthalate ester plasticizers. [3] (This question continues on page 9) Please do not write on this page. Answers written on this page will not be marked. (Option A, question 3 continued) (c) Explain why phthalates are replaced by other plasticizers in the production of plastics. [2]
Turn over 4. There has been significant growth in the use of carbon nanotubes, CNT. (a) Explain these properties of carbon nanotubes. [2] Excellent strength: Excellent conductivity: (b) (i) Alloying metals changes their properties. Suggest one property of magnesium that could be improved by making a magnesium–CNT alloy. [1] (Option A continues on the following page) (Option A, question 4 continued) (ii) Pure magnesium needed for making alloys can be obtained by electrolysis of molten magnesium chloride. Iron cathode Gas Inert gas in Molten magnesium Molten magnesium chloride Inert gas out Graphite anode Write the half-equations for the reactions occurring in this electrolysis. [2] Anode: Cathode: (iii) Calculate the theoretical mass of magnesium obtained if a current of 3.00 A is used for 10.0 hours. Use charge (Q) = current (I ) × time (t ) and section 2 of the data booklet. [3] (Option A continues on the following page) Turn over (Option A, question 4 continued) (iv) Suggest a gas which should be continuously passed over the molten magnesium in the electrolytic cell. [1] (c) Zeolites can be used as catalysts in the manufacture of CNT. Explain, with reference to their structure, the high selectivity of zeolites. [2] (d) Experiments have been done to explore the nematic liquid crystal behaviour of CNT. Justify how CNT molecules could be classified as nematic. [1] End of Option A
6. Phospholipids are a main component of cell membranes. (a) Deduce the products of the hydrolysis of a non-substituted phospholipid, where R1 and R2 represent long alkyl chains. [2] H2C O C O R1 HC O C O R2 H2C O P O OH OH + 3H2O H+ heat (b) (i) A representation of a phospholipid bilayer cell membrane is shown: Extracellular space Intracellular space A B Identify the components of the phospholipid labelled A and B. [1] A: B: (Option B continues on the following page) Turn over (Option B, question 6 continued) (ii) State the most significant intermolecular forces in the phospholipid in b(i). [2] Forces occurring between components labelled A: Forces occurring between components labelled B: (c) Phospholipids help maintain cellular environments while fatty acid lipids have important roles in energy storage and electrical insulation. Discuss the structural properties of saturated fats needed for these roles. [2] Energy storage: Electrical insulator: (Option B continues on the following page) (Option B continued)
9. What is the order of increasing boiling point? A. CH3CH2CH2CH3 < CH3CH(OH)CH3 < CH3COCH3 < CH3CO2H B. CH3CH2CH2CH3 < CH3COCH3 < CH3CH(OH)CH3 < CH3CO2H C. CH3CO2H < CH3COCH3 < CH3CH(OH)CH3 < CH3CH2CH2CH3 D. CH3CH2CH2CH3 < CH3COCH3 < CH3CO2H < CH3CH(OH)CH3
9. Which is correct for all solid ionic compounds? A. High volatility B. Poor electrical conductivity C. Low melting point D. Good solubility in water
10. Which species does not have resonance structures? A. C6H6 B. NH4 + C. CO3 2− D. O3
10. Which combination causes the strength of metallic bonding to increase? Charge on cations Ionic radius A. smaller smaller B. larger larger C. smaller larger D. larger smaller
10. Which compound has the shortest C to O bond? A. CH3CHO B. CO C. CO2 D. C2H5OC2H5
11. Which describes an ionic compound? Melting point Electrical conductivity of solid A. high high B. high low C. low high D. low low Turn over
11. Which molecule contains an incomplete octet of electrons? A. NF3 B. BF3 C. BrF D. SF2
11. Which describes a resonance structure? A. Double bond can be drawn in alternative positions. B. Bonds vibrate by absorbing IR radiation. C. A double and a single bond in the molecule D. A Lewis structure
12. Which combination corresponds to a strong metallic bond? Charge on the metal ion Radius of ion A. large large B. large small C. small small D. small large
12. Which compound has hydrogen bonds between its molecules? A. CH4 B. CH4O C. CH3Cl D. CH2O Turn over
12. What is the structure and bonding in SiO2 (s)? Structure Bonding A. giant covalent B. giant ionic C. bent molecule covalent D. linear molecule covalent Turn over Questions 13 and 14 are about an experiment to measure the enthalpy of combustion, ∆Hc, of ethanol, using the apparatus and setup shown. Thermometer Beaker Water Spirit burner Ethanol N19/4/CHEMI/SPM/ENG/TZ0/XX
24. Which compound has the lowest boiling point? A. CH3CH2CH2CH2CH2CH3 B. CH3CH2CH2CH2CH3 C. CH3CH(CH3)CH2CH3 D. CH3C(CH3)2CH3
Bonding, structure and materials: quick facts
How often does Bonding, structure and materials come up in IB Chemistry SL?
Bonding, structure and materials is tagged on 289 of the 1,521 IB Chemistry SL past-paper questions on PastPaperPrep (19%), from papers sat 2016-2026. Paper 1 has the most Bonding, structure and materials questions, with 143. These are archive counts, not a prediction, and a question can carry more than one topic.
Are the IB Chemistry SL Bonding, structure and materials questions free?
124 of the 289 IB Chemistry SL Bonding, structure and materials questions are free to practise. The other 165 need a plan for IB Chemistry SL, from $6 a month.
Do the IB Chemistry SL Bonding, structure and materials questions have answers?
Yes. Each IB Chemistry SL Bonding, structure and materials question shows the official mark scheme answer. Many also have a step-by-step worked explanation written by PastPaperPrep.
“Every question for that one subtopic I kept failing, in one place.”