IGCSE Maths 0580 notes › Glossary
Glossary
Key terms in plain words, with the lesson that teaches each one.
2
- 24-hour clock
- A way of writing the time with four digits, from at midnight to , with no a.m. or p.m.; 4.40 p.m. is .Taught in 1.15 Time
A
- acceleration
- The rate of change of speed, in a unit such as m/s; slowing down is called deceleration and is given as a positive number.Taught in 2.9 Graphs in practical situations
- acute angle
- An angle between and .Taught in 4.1 Geometrical terms
- adjacent side
- In a right-angled triangle, the side that touches the angle you are working with and is not the hypotenuse.Taught in 6.2 Right-angled triangles
- algebraic fraction
- A fraction with letters in its numerator, its denominator or both, such as ; it is also called a rational expression.Taught in 2.3 Algebraic fractions
- alternate angles
- Two angles between a pair of parallel lines, on opposite sides of the line that crosses them, in a Z shape; they are equal.Taught in 4.6 Angles
- alternate segment theorem
- The angle between a tangent and a chord, at the point of contact, equals the angle that chord makes at the circumference in the segment on the other side of the chord.Taught in 4.7 Circle theorems I
- angle at the centre
- The angle made at the centre of a circle by two radii; it is twice any angle at the circumference that stands on the same arc.Taught in 4.7 Circle theorems I
- angle between a line and a plane
- The angle between a line and its projection on the plane, where the projection joins the point where the line meets the plane to the foot of a perpendicular dropped from another point on the line.Taught in 6.6 Pythagoras’ theorem and trigonometry in three dimensions
- angle in a semicircle
- The angle at a point on a circle made by lines to the two ends of a diameter; it is always .Taught in 4.7 Circle theorems I
- angle of elevation
- The angle you look up through from the horizontal to see something higher; looking down from the horizontal gives an angle of depression instead.Taught in 6.2 Right-angled triangles
- angle sum
- The total of the interior angles of a shape: for a triangle, for a quadrilateral and for a polygon with sides.Taught in 4.6 Angles
- angles at a point
- Angles that fill the space all the way round one point; they add up to , and angles on a straight line add up to .Taught in 4.6 Angles
- angles in the same segment
- Angles at the circumference that stand on the same chord, on the same side of it; they are always equal.Taught in 4.7 Circle theorems I
- arc
- Part of the circumference of a circle; between two points that are not the ends of a diameter, the shorter arc is the minor arc and the longer one is the major arc.Taught in 4.1 Geometrical terms
- arc length
- The length of an arc of a circle: the fraction of the circumference, where is the angle the arc makes at the centre.Taught in 5.3 Circles, arcs and sectors
- area
- The amount of flat surface inside a shape, measured in square units such as or .Taught in 5.2 Area and perimeter
- asymptote
- A straight line that a curve gets closer and closer to as it heads off the edge of the graph, such as and for .Taught in 2.11 Sketching curves
- average
- One value that describes a typical member of a data set: the mean, the median or the mode.Taught in 9.3 Averages and measures of spread
- average speed
- The total distance of a journey divided by the total time it takes, including any stops.Taught in 1.12 Rates
- axis
- One of the two number lines on a grid, the horizontal -axis or the vertical -axis, that you read coordinates against; the plural is axes.Taught in 3.1 Coordinates
B
- bar chart
- A chart where each category is a bar of the same width, and the height of the bar shows its frequency; a dual bar chart puts bars for two groups side by side, and a composite bar chart stacks the parts of each total into one bar.Taught in 9.4 Statistical charts and diagrams
- bearing
- A direction given as an angle measured clockwise from north, written with three figures, such as or .Taught in 4.3 Scale drawings
- biased
- Describes a dice, coin or spinner that is not fair, so some outcomes are more likely than others; this is called bias.Taught in 8.2 Relative and expected frequencies
- boundary line
- The line on a graph where the two sides of an inequality in and are equal; it is drawn broken for or and solid for or .Taught in 2.6 Inequalities
C
- chord
- A straight line joining two points on a circle.Taught in 4.1 Geometrical terms
- circumference
- The whole distance round a circle, or the curve itself.Taught in 4.1 Geometrical terms
- class interval
- One of the groups in a grouped frequency table, such as ; its class width is the difference between its upper and lower boundaries.Taught in 9.3 Averages and measures of spread
- co-interior angles
- Two angles between a pair of parallel lines, on the same side of the line that crosses them; they add up to .Taught in 4.6 Angles
- coefficient
- The number that multiplies a letter in a term, sign included; in the coefficient of is .Taught in 2.1 Introduction to algebra
- collinear
- Describes three or more points that all lie on one straight line.Taught in 7.4 Vector geometry
- column vector
- A vector written as two numbers in a column, : across (negative means left) and up (negative means down).Taught in 7.1 Transformations
- combined events
- Two or more events that happen together or one after the other, such as rolling two dice or picking two counters.Taught in 8.3 Probability of combined events
- combined transformation
- One transformation followed by another, where the second is applied to the image of the first.Taught in 7.1 Transformations
- common factor
- A number that is a factor of each of two or more numbers: is a common factor of and .Taught in 1.1 Types of number
- common multiple
- A number that is a multiple of each of two or more numbers: is a common multiple of and .Taught in 1.1 Types of number
- complement
- The complement of set , written , is the set of elements of the universal set that are not in .Taught in 1.2 Sets
- complementary event
- The event that a given event does not happen; its probability is minus the probability that the event happens.Taught in 8.1 Introduction to probability
- completing the square
- Rewriting a quadratic as a bracket squared plus a number, such as .Taught in 2.2 Algebraic manipulation
- composite function
- One function applied to the output of another: applies first, then .Taught in 2.13 Functions
- compound interest
- Interest that is added to the amount each year, so the next year's interest is worked out on the new total; after years at the value is .Taught in 1.13 Percentages
- compound shape
- A shape made by joining simple shapes, such as rectangles, triangles and parts of circles, or by cutting one out of another; a compound solid is built from simple solids in the same way.Taught in 5.5 Compound shapes and parts of shapes
- conditional probability
- The probability that an event happens when you already know another event has happened, so you count only inside the group you know about.Taught in 8.4 Conditional probability
- cone
- A solid with a circular base and a curved surface that rises to a point.Taught in 4.1 Geometrical terms
- congruent
- Congruent shapes are exactly the same shape and size, so one fits exactly on the other, even after turning or flipping it.Taught in 4.1 Geometrical terms
- constant of proportionality
- The fixed number in a proportion equation such as or , found by substituting one known pair of values.Taught in 2.8 Proportion
- conversion graph
- A straight-line graph for changing an amount in one unit or currency into another, such as pounds into dollars.Taught in 2.9 Graphs in practical situations
- coordinates
- A pair of numbers that gives the position of a point on a grid: is how far across from the origin and is how far up or down.Taught in 3.1 Coordinates
- correlation
- How two variables are linked, seen in the pattern of a scatter diagram: positive when one tends to increase as the other increases, negative when one tends to decrease as the other increases, and zero when there is no upward or downward trend.Taught in 9.5 Scatter diagrams
- corresponding angles
- Two angles in the same position at the two places where a line crosses a pair of parallel lines; they are equal.Taught in 4.6 Angles
- corresponding sides
- Sides in matching positions on two similar shapes, such as the side between the same pair of equal angles.Taught in 4.4 Similarity
- cosine
- In a right-angled triangle, the cosine of an angle is the adjacent side divided by the hypotenuse, written . A calculator or the cosine graph gives it for any angle, such as .Taught in 6.2 Right-angled triangles
- cosine rule
- In any triangle, , which links all three sides to one angle; use it with two sides and the angle between them, or with three sides.Taught in 6.5 Non-right-angled triangles
- cross-section
- The flat shape you see when you cut straight through a solid; a prism has the same cross-section all the way along its length.Taught in 5.4 Surface area and volume
- cube number
- A positive whole number multiplied by itself and then by itself again, such as , , or ; .Taught in 1.1 Types of number
- cube root
- The one number that gives when you cube it, written , so and .Taught in 1.3 Powers and roots
- cubic sequence
- A sequence whose third differences are all the same and not zero; its nth term has as the highest power, as in .Taught in 2.7 Sequences
- cuboid
- A solid box shape with six rectangular faces.Taught in 4.1 Geometrical terms
- cumulative frequency
- The running total of the frequencies: the number of data values less than or equal to a given value.Taught in 9.6 Cumulative frequency diagrams
- cumulative frequency diagram
- A graph of cumulative frequency plotted at the upper boundary of each class, with the points joined by a smooth curve, used to estimate the median, quartiles and percentiles.Taught in 9.6 Cumulative frequency diagrams
- cyclic quadrilateral
- A quadrilateral with all four corners on one circle; its opposite angles add up to .Taught in 4.7 Circle theorems I
- cylinder
- A solid with two equal circular ends joined by a curved surface, like a prism with a circular cross-section.Taught in 4.1 Geometrical terms
D
- decimal place
- A digit position after the decimal point, so has three decimal places.Taught in 1.9 Estimation
- density
- The mass per unit of volume, so density mass volume, in units such as g/cm.Taught in 1.12 Rates
- depreciation
- The loss in value of something, such as a car or a phone, as it gets older; a fixed percentage loss each year is exponential decay.Taught in 1.17 Exponential growth and decay
- derivative
- The result of differentiating, written , which gives the gradient of the curve at any value of .Taught in 2.12 Differentiation
- diameter
- A chord that passes through the centre of a circle, twice as long as the radius.Taught in 4.1 Geometrical terms
- difference of two squares
- One square subtracted from another, , which always factorises as .Taught in 2.2 Algebraic manipulation
- differentiation
- The process of finding a formula for the gradient of a curve from its equation; each term becomes .Taught in 2.12 Differentiation
- direct proportion
- Two quantities are in direct proportion when multiplying one by a number multiplies the other by the same number, so their ratio stays the same.Taught in 1.11 Ratio and proportion
- domain
- The set of input values a function is allowed to take.Taught in 2.13 Functions
E
- element
- An element is one member of a set; is the number of elements in set .Taught in 1.2 Sets
- empty set
- The empty set, written or , is the set with no elements.Taught in 1.2 Sets
- enlargement
- A transformation that multiplies the move from a fixed centre to every point by the same scale factor, so the image is the same shape but may be a different size.Taught in 7.1 Transformations
- equation
- A statement that two expressions are equal, such as ; solving it finds the values that make it true.Taught in 2.5 Equations
- equation of a straight line
- An equation that every point on a straight line fits, usually written , where is the gradient and is the -intercept; a vertical line has the form .Taught in 3.5 Equations of linear graphs
- equilateral triangle
- A triangle with three equal sides and three equal angles of .Taught in 4.1 Geometrical terms
- equivalent fraction
- A fraction with the same value as another but different numbers, such as and , made by multiplying or dividing the numerator and denominator by the same non-zero number.Taught in 1.4 Fractions, decimals and percentages
- estimate
- A rough answer to a calculation, found by rounding each number (usually to significant figure) and working it out with the rounded values.Taught in 1.9 Estimation
- event
- One outcome or a group of outcomes, such as scoring an even number when a dice is rolled. An impossible event has no outcomes in it.Taught in 8.1 Introduction to probability
- exact trigonometric values
- The values you need to know of and for , and of for , written exactly with whole numbers, fractions and surds instead of rounded decimals.Taught in 6.3 Exact trigonometric values
- exchange rate
- The rate for changing money from one currency into another, such as euro Canadian dollars.Taught in 1.12 Rates
- expand
- Multiply out brackets by multiplying every term inside by every term outside, so becomes .Taught in 2.2 Algebraic manipulation
- expected frequency
- The number of times you expect an outcome to happen: its probability multiplied by the number of trials.Taught in 8.2 Relative and expected frequencies
- exponential decay
- An amount that is multiplied by the same number between and every step, such as each day for a fall.Taught in 1.17 Exponential growth and decay
- exponential growth
- An amount that is multiplied by the same number greater than every step, such as each year for a rise.Taught in 1.17 Exponential growth and decay
- exponential sequence
- A sequence where you multiply by the same number each time, such as ; its nth term is , where is the first term and the number you multiply by.Taught in 2.7 Sequences
- expression
- A group of numbers, letters and operations with no equals sign, such as .Taught in 2.1 Introduction to algebra
- exterior angle
- The angle between one side of a polygon and the next side extended past the vertex; at a vertex that is not reflex, the interior and exterior angles add up to .Taught in 4.6 Angles
F
- face
- One flat surface of a solid; two faces meet at an edge.Taught in 4.1 Geometrical terms
- factor
- A positive whole number that divides another exactly, with no remainder: and are the factors of .Taught in 1.1 Types of number
- factorise
- Write an expression as a product of factors, the reverse of expanding; fully factorised means no bracket can be factorised any further, as in .Taught in 2.2 Algebraic manipulation
- fair
- Describes a dice, coin or spinner on which each face, side or section is equally likely to come up.Taught in 8.2 Relative and expected frequencies
- formula
- A rule, in letters or words, that shows how to work out one quantity from others, such as for the area of a rectangle.Taught in 2.1 Introduction to algebra
- fraction
- A part of a whole, written : the denominator (never ) is how many equal parts the whole is split into, and the numerator is how many of them you take.Taught in 1.4 Fractions, decimals and percentages
- fractional index
- An index that is a fraction, which means a root: for , and , so .Taught in 1.7 Indices I
- frequency
- The number of times a value or category occurs in a set of data.Taught in 9.1 Classifying statistical data
- frequency density
- The frequency of a class divided by its class width; it is the height of the class's bar on a histogram.Taught in 9.7 Histograms
- frequency table
- A table that lists each value, category or class with its frequency; the frequencies add up to the total number of data values.Taught in 9.1 Classifying statistical data
- frustum
- The part of a cone or pyramid that is left when the top is cut off parallel to the base.Taught in 4.1 Geometrical terms
- function
- A rule that turns each input number into exactly one output number, such as .Taught in 2.10 Graphs of functions
- function notation
- Writing a function as , so that means the output when the input is .Taught in 2.13 Functions
G
- gradient
- How steep a straight line is: the change in divided by the change in between two points on it, negative when the line slopes down from left to right.Taught in 3.3 Gradient of linear graphs
- gradient of a curve
- How steep a curve is at one point, equal to the gradient of the tangent drawn at that point.Taught in 2.12 Differentiation
- grouped frequency table
- A frequency table that shows how many values fall in each class interval, instead of how often each single value occurs.Taught in 9.3 Averages and measures of spread
H
- hemisphere
- Half of a sphere, with one flat circular face and one curved surface.Taught in 4.1 Geometrical terms
- highest common factor
- The largest number that is a factor of each of two or more numbers, written HCF; the HCF of and is .Taught in 1.1 Types of number
- histogram
- A diagram of grouped data drawn as touching bars, where the area of each bar is proportional to the frequency of its class; its vertical axis is frequency density.Taught in 9.7 Histograms
- hypotenuse
- The side of a right-angled triangle opposite the right angle; it is always the longest side.Taught in 6.1 Pythagoras’ theorem
I
- image
- The shape you get after a transformation; the shape you started with is the object, and the image of is often labelled .Taught in 7.1 Transformations
- improper fraction
- A fraction whose numerator is equal to or bigger than its denominator, such as , so it is worth or more and can be written as a whole or mixed number.Taught in 1.4 Fractions, decimals and percentages
- index
- The small raised number in a power, also called the power or exponent, which, when it is a positive whole number, says how many copies of the base to multiply: in the index is .Taught in 1.7 Indices I
- inequality
- A statement that compares two quantities using (less than), (greater than), (at most), (at least) or (not equal), such as .Taught in 1.5 Ordering
- integer
- A whole number that is positive, negative or zero, such as , or .Taught in 1.1 Types of number
- interior angle
- The angle inside a polygon at one of its vertices.Taught in 4.6 Angles
- interquartile range
- The upper quartile minus the lower quartile: the spread of the middle half of the data.Taught in 9.3 Averages and measures of spread
- intersection
- The intersection of sets and , written , is the set of elements that are in both and .Taught in 1.2 Sets
- inverse function
- The function that undoes , taking each output of back to its input.Taught in 2.13 Functions
- inverse proportion
- Two quantities are in inverse proportion when for a fixed number , so multiplying one by a number divides the other by that number and their product stays the same.Taught in 2.8 Proportion
- irrational number
- A number that cannot be written as a fraction of two integers, such as or ; its decimal goes on forever without repeating.Taught in 1.1 Types of number
- isosceles triangle
- A triangle with two equal sides, where the two angles opposite those sides are also equal.Taught in 4.1 Geometrical terms
K
- kite
- A quadrilateral with two pairs of equal sides, where the two sides in each pair are next to each other.Taught in 4.1 Geometrical terms
L
- like terms
- Terms with exactly the same letters raised to the same powers, such as and ; only their coefficients can differ.Taught in 2.2 Algebraic manipulation
- line of best fit
- A single straight line, drawn by eye with a ruler, that follows the trend of the points on a scatter diagram, with about as many points on each side of it.Taught in 9.5 Scatter diagrams
- line of symmetry
- A line that splits a shape into two halves that are mirror images, so folding along it makes the halves fit exactly; also called a mirror line.Taught in 4.5 Symmetry
- line segment
- The part of a straight line between two end points, so it has a definite length.Taught in 3.4 Length and midpoint
- linear equation
- An equation in which the unknown appears only to the power , such as .Taught in 2.5 Equations
- linear graph
- The straight-line graph of a linear equation such as , drawn by plotting points from a table of values and joining them with a ruler.Taught in 3.2 Drawing linear graphs
- linear inequality
- An inequality in which the unknown appears only to the power , such as ; you solve it like a linear equation, but reverse the sign if you multiply or divide both sides by a negative number.Taught in 2.6 Inequalities
- linear sequence
- A sequence that goes up or down by the same amount each time, such as ; its nth term looks like .Taught in 2.7 Sequences
- lower bound
- The smallest value that a rounded value could have been before rounding; for a calculation, the limit its answer cannot go below.Taught in 1.10 Limits of accuracy
- lowest common multiple
- The smallest number that is a multiple of each of two or more numbers, written LCM; the LCM of and is .Taught in 1.1 Types of number
M
- magnitude of a vector
- The length of a vector, written with modulus signs such as ; for a column vector with components and it is .Taught in 7.3 Magnitude of a vector
- map scale
- A ratio that links map and real distances: cm on the map stands for cm in real life.Taught in 1.11 Ratio and proportion
- mean
- The total of all the values divided by the number of values.Taught in 9.3 Averages and measures of spread
- measure of spread
- A number that shows how spread out the data are, such as the range or the interquartile range.Taught in 9.3 Averages and measures of spread
- median
- The middle value when the data are in order; with an even number of values, it is halfway between the two middle values.Taught in 9.3 Averages and measures of spread
- metric units
- The units built on powers of : mm, cm, m and km for length; g and kg for mass; ml and litres for capacity; and squared or cubed length units, such as and , for area and volume.Taught in 5.1 Units of measure
- midpoint
- The point exactly halfway between the two ends of a line segment, found by averaging their coordinates; for a class interval, the value halfway between its two ends.Taught in 3.4 Length and midpoint
- mixed number
- A whole number and a proper fraction written together, such as , which means .Taught in 1.4 Fractions, decimals and percentages
- modal class
- The class interval with the highest frequency, when all the classes have the same width.Taught in 9.3 Averages and measures of spread
- mode
- The value that occurs most often in a data set; there can be more than one mode, or none.Taught in 9.3 Averages and measures of spread
- multiple
- The result of multiplying a number by a positive whole number: are multiples of .Taught in 1.1 Types of number
N
- natural number
- A positive whole number used for counting: Some books include as well.Taught in 1.1 Types of number
- negative index
- An index below zero, which means the reciprocal of the positive power: for , so .Taught in 1.7 Indices I
- negative number
- A number less than zero, written with a minus sign, such as or ; on a number line it lies to the left of .Taught in 1.6 The four operations
- negative reciprocal
- The negative reciprocal of a non-zero number is , found by turning the number upside down as a fraction and changing its sign, so the negative reciprocal of is .Taught in 3.7 Perpendicular lines
- net
- A flat shape that folds along its edges to make a solid, with each face of the solid appearing on it once.Taught in 4.2 Geometrical constructions
- nth term
- A formula in that gives any term of a sequence from its position ; for , the 10th term is .Taught in 2.7 Sequences
O
- obtuse angle
- An angle between and .Taught in 4.1 Geometrical terms
- opposite side
- In a right-angled triangle, the side directly across from the angle you are working with; it does not touch that angle.Taught in 6.2 Right-angled triangles
- order of operations
- The agreed order for working out a calculation: brackets, then indices, then division and multiplication from left to right, then addition and subtraction from left to right (BIDMAS).Taught in 1.6 The four operations
- origin
- The point , where the -axis and the -axis cross.Taught in 3.1 Coordinates
- outcome
- One possible result of an experiment, such as scoring when a dice is rolled.Taught in 8.1 Introduction to probability
P
- parabola
- The U-shaped or upside-down U-shaped curve of a quadratic such as , symmetrical about a vertical line through its lowest or highest point.Taught in 2.10 Graphs of functions
- parallel
- Parallel lines go in the same direction and stay the same distance apart, so they never meet; on a grid, parallel lines that are not vertical have equal gradients.Taught in 4.1 Geometrical terms
- parallelogram
- A quadrilateral with two pairs of parallel sides, whose opposite sides are equal and opposite angles are equal.Taught in 4.1 Geometrical terms
- percentage
- An amount out of , written with the % sign, so means or .Taught in 1.4 Fractions, decimals and percentages
- percentage decrease
- The decrease in an amount written as a percentage of the original amount: .Taught in 1.13 Percentages
- percentage increase
- The increase in an amount written as a percentage of the original amount: . Increases and decreases are both percentage changes.Taught in 1.13 Percentages
- percentile
- The th percentile is the value with of the data at or below it, so the th percentile has of the values at or below it.Taught in 9.6 Cumulative frequency diagrams
- perimeter
- The total distance around the outside edge of a flat shape, measured in units of length such as cm or m.Taught in 5.2 Area and perimeter
- perpendicular
- Perpendicular lines meet or cross at a right angle, .Taught in 4.1 Geometrical terms
- perpendicular bisector
- The line that cuts a line segment into two equal halves and crosses it at right angles; every point on it is the same distance from both ends.Taught in 4.1 Geometrical terms
- perpendicular height
- The height of a shape measured at right angles to its base, not along a slanting side; in a triangle with an obtuse angle it can fall outside the shape, meeting the base extended.Taught in 5.2 Area and perimeter
- pi
- The number , the circumference of any circle divided by its diameter; an answer 'in terms of ' keeps as a symbol, such as .Taught in 5.3 Circles, arcs and sectors
- pictogram
- A chart that shows frequencies with a repeated symbol, with a key saying how many items one whole symbol stands for.Taught in 9.4 Statistical charts and diagrams
- pie chart
- A circle cut into sectors, one for each category, where each sector's angle is proportional to its frequency, so the angles add up to .Taught in 9.4 Statistical charts and diagrams
- plane
- A flat surface that goes on for ever in every direction, such as the surface that a flat face of a solid lies in.Taught in 4.1 Geometrical terms
- plane of symmetry
- A flat slice that divides a solid into two halves that are mirror images of each other.Taught in 4.5 Symmetry
- polygon
- A flat, closed shape with straight sides, such as a pentagon ( sides), hexagon (), octagon () or decagon (), which is regular if all its sides and angles are equal and irregular if not.Taught in 4.1 Geometrical terms
- position vector
- The vector from the origin to a point: the position vector of is , often written .Taught in 7.4 Vector geometry
- prime factor
- A factor of a number that is also a prime number; the prime factors of are and , and .Taught in 1.1 Types of number
- prime number
- A natural number with exactly two factors, and itself, such as , , or ; is not prime.Taught in 1.1 Types of number
- principal
- The amount of money first invested or borrowed, before any interest is added.Taught in 1.13 Percentages
- prism
- A solid with flat faces and the same cross-section all the way through, named after that cross-section, such as a triangular prism.Taught in 4.1 Geometrical terms
- probability
- A number from to that measures how likely an event is, written as a fraction, a decimal or a percentage.Taught in 8.1 Introduction to probability
- probability scale
- A line from (impossible) to (certain), with (even chance) in the middle, on which probabilities are marked.Taught in 8.1 Introduction to probability
- profit and loss
- The difference between the selling price and the cost price: a profit if the item sells for more than it cost, a loss if it sells for less; as a percentage it is compared with the cost price.Taught in 1.13 Percentages
- proper fraction
- A fraction whose numerator is smaller than its denominator, such as , so it is worth less than .Taught in 1.4 Fractions, decimals and percentages
- proportion
- Two ratios that are equal, such as ; working in proportion means changing every amount by the same multiplier.Taught in 1.11 Ratio and proportion
- pyramid
- A solid with a flat base and triangular faces that meet at one vertex at the top.Taught in 4.1 Geometrical terms
- Pythagoras' theorem
- In a right-angled triangle, the square of the hypotenuse equals the sum of the squares of the other two sides: .Taught in 6.1 Pythagoras’ theorem
Q
- quadratic equation
- An equation that can be written as with , so is the highest power of .Taught in 2.5 Equations
- quadratic expression
- An expression whose highest power of the variable is , such as .Taught in 2.2 Algebraic manipulation
- quadratic formula
- The formula , which gives the solutions of when .Taught in 2.5 Equations
- quadratic sequence
- A sequence whose second differences (the gaps between the gaps) are all the same and not zero; its nth term has as the highest power, as in .Taught in 2.7 Sequences
- quadrilateral
- A flat shape with four straight sides, whose four angles add up to .Taught in 4.1 Geometrical terms
- quartile
- The lower quartile is the median of the lower half of the ordered data and the upper quartile is the median of the upper half, so with the median they cut the data into four equal parts.Taught in 9.3 Averages and measures of spread
R
- radius
- The distance from the centre of a circle to any point on the circle, or a line joining them; the plural is radii.Taught in 4.1 Geometrical terms
- range of a data set
- The largest value minus the smallest value, which shows how spread out the data are (the range of a function is a different idea).Taught in 9.3 Averages and measures of spread
- range of a function
- The set of output values a function gives from its domain; not the same as the range of a set of data.Taught in 2.13 Functions
- rate
- The amount of one quantity for each one unit of another quantity, such as dollars per hour or litres per minute.Taught in 1.12 Rates
- rate of change
- How much one quantity changes for each one unit of another, such as km per hour; on a straight-line graph it is the gradient.Taught in 2.9 Graphs in practical situations
- ratio
- A comparison of amounts of the same kind, written , meaning there are of the first for every of the second.Taught in 1.11 Ratio and proportion
- rational number
- A number that can be written as a fraction of two integers with , such as , or .Taught in 1.1 Types of number
- rationalising the denominator
- Rewriting a fraction so that its denominator has no surd, by multiplying the top and bottom by the same number, such as .Taught in 1.18 Surds
- reciprocal
- The number for a number , which multiplies by to give : the reciprocal of is .Taught in 1.1 Types of number
- recurring decimal
- A decimal in which one digit or a block of digits repeats forever, such as ; dots over the first and last digits of the block (or a bar over the whole block) show what repeats.Taught in 1.4 Fractions, decimals and percentages
- reflection
- A transformation that flips a shape in a mirror line: each point moves straight across the line, at right angles to it, to the same distance on the other side.Taught in 7.1 Transformations
- reflex angle
- An angle between and .Taught in 4.1 Geometrical terms
- regular polygon
- A polygon whose sides are all equal and whose angles are all equal.Taught in 4.6 Angles
- relative frequency
- The number of times an outcome happens in an experiment divided by the total number of trials; it is used as an estimate of the probability.Taught in 8.2 Relative and expected frequencies
- reverse percentage
- Finding the original amount from the amount after a percentage change, by dividing the new amount by the multiplier, such as after a increase.Taught in 1.13 Percentages
- rhombus
- A quadrilateral with four equal sides, whose opposite sides are parallel and opposite angles are equal.Taught in 4.1 Geometrical terms
- right angle
- An angle of exactly , a quarter turn, marked on diagrams with a small square.Taught in 4.1 Geometrical terms
- right-angled triangle
- A triangle with one angle of .Taught in 4.1 Geometrical terms
- root
- A value of that makes an equation true; on a graph, an value where the curve crosses or touches the -axis.Taught in 2.10 Graphs of functions
- rotation
- A transformation that turns a shape about a fixed point, the centre, through an angle, clockwise or anticlockwise.Taught in 7.1 Transformations
- rotational symmetry
- A shape has rotational symmetry if it fits onto itself after a turn of more than but less than about its centre; its order is the number of times it fits onto itself in one full turn.Taught in 4.5 Symmetry
- rounding
- Replacing a number with a simpler value close to it, such as to the nearest , to a number of decimal places or to a number of significant figures.Taught in 1.9 Estimation
- rules of indices
- The rules for powers of the same base, also called the laws of indices: , and .Taught in 1.7 Indices I
S
- sample space diagram
- A table that shows every possible outcome of two combined events, with one event along the top and the other down the side.Taught in 8.3 Probability of combined events
- scalar
- A single number, such as or , that multiplies a vector: it stretches, shrinks or reverses the vector but has no direction of its own.Taught in 7.2 Vectors in two dimensions
- scale drawing
- An accurate drawing in which every real length is divided by the same number, given by the scale, so shapes and angles stay the same.Taught in 4.3 Scale drawings
- scale factor
- The number every length is multiplied by to get from one similar shape to the other, found as a new length divided by the matching old length.Taught in 4.4 Similarity
- scalene triangle
- A triangle with no equal sides and no equal angles.Taught in 4.1 Geometrical terms
- scatter diagram
- A graph of paired data, where each pair of values is plotted as one cross, with one variable on each axis, so you can see whether the two are linked.Taught in 9.5 Scatter diagrams
- sector
- The region of a circle between two radii and the arc joining their ends, like a slice of pizza.Taught in 4.1 Geometrical terms
- sector area
- The area of a sector of a circle: the fraction of the circle's area, where is the sector angle at the centre.Taught in 5.3 Circles, arcs and sectors
- segment
- The region of a circle between a chord and an arc.Taught in 4.1 Geometrical terms
- semicircle
- Half of a circle, cut off by a diameter.Taught in 4.1 Geometrical terms
- sequence
- A list of numbers in order, made by a rule, such as Taught in 2.7 Sequences
- set
- A set is a collection of objects, called its elements, usually written inside curly brackets, such as .Taught in 1.2 Sets
- significant figure
- A digit of a number counted from its first non-zero digit (zeros that only fill places at the end of a whole number don't count), so has three significant figures: , and .Taught in 1.9 Estimation
- similar shapes
- Shapes that are the same shape but may be different sizes: their angles are equal and every pair of corresponding sides is in the same ratio.Taught in 4.4 Similarity
- simple interest
- Interest worked out on the principal only, so it is the same every year: for a rate of per year over years.Taught in 1.13 Percentages
- simplify
- Rewrite an expression in its simplest form, usually by collecting like terms so each letter and power appears only once.Taught in 2.2 Algebraic manipulation
- simultaneous equations
- Two equations with the same unknowns that must both be true at once, so you solve them together.Taught in 2.5 Equations
- sine
- In a right-angled triangle, the sine of an angle is the opposite side divided by the hypotenuse, written . A calculator or the sine graph gives it for any angle, such as .Taught in 6.2 Right-angled triangles
- sine rule
- In any triangle, each side divided by the sine of the angle across from it gives the same value: ; when it is used to find an angle, the angle may be acute or obtuse.Taught in 6.5 Non-right-angled triangles
- slant height
- The distance from the top point of a cone down its sloping side to the edge of the base; on a pyramid, it is the height of a triangular face, measured at right angles to that face's base edge.Taught in 5.4 Surface area and volume
- speed
- The distance travelled per unit of time, so speed distance time, in units such as km/h or m/s.Taught in 1.12 Rates
- speed-time graph
- A graph with time across and speed up: its gradient is the acceleration and the area under it is the distance travelled.Taught in 2.9 Graphs in practical situations
- sphere
- A perfectly round solid, like a ball, where every point on the surface is the same distance from the centre.Taught in 4.1 Geometrical terms
- square number
- A positive whole number multiplied by itself, such as , , or ; , and is its square root.Taught in 1.1 Types of number
- square root
- A number that gives when you square it; every positive number has two, such as and for , and means the positive one, .Taught in 1.3 Powers and roots
- standard form
- A way of writing a number as , where and is an integer, used for very large and very small numbers.Taught in 1.8 Standard form
- stationary point
- A point on a curve where the gradient is zero, so and the tangent is horizontal; it can be a maximum or a minimum.Taught in 2.12 Differentiation
- stem-and-leaf diagram
- A diagram that lists data in order by splitting each value into a stem (its first digits) and a leaf (its last digit), with a key showing how to read an entry.Taught in 9.4 Statistical charts and diagrams
- subject of a formula
- The letter on its own on one side of a formula, such as in .Taught in 2.5 Equations
- subset
- Set is a subset of set , written , when every element of is also an element of .Taught in 1.2 Sets
- substitution
- Replacing each letter in an expression or formula with a given number, then working out the value.Taught in 2.1 Introduction to algebra
- surd
- A root that cannot be written as a whole number or a fraction, such as , left as a root to keep it exact; it is simplest when the number under the root has no square factor except , as in .Taught in 1.18 Surds
- surface area
- The total area of all the faces and curved surfaces of a solid, measured in square units such as ; the curved surface area of a cylinder or cone counts only the curved part, not the flat circles.Taught in 5.4 Surface area and volume
T
- table of values
- A table of chosen values with the value a rule gives for each, used to plot the points of a graph.Taught in 2.10 Graphs of functions
- tangent
- A straight line that touches a circle at exactly one point, or, for a curve, the straight line that just touches it at a point and is as steep as the curve there.Taught in 4.1 Geometrical terms
- tangent and radius angle
- The angle between a tangent and the radius drawn to its point of contact; it is always .Taught in 4.7 Circle theorems I
- tangent ratio
- In a right-angled triangle, the tangent of an angle is the opposite side divided by the adjacent side, written . A calculator or the tangent graph gives it for any angle except , and so on. It is not the same as a tangent line to a circle or curve.Taught in 6.2 Right-angled triangles
- tangents from an external point
- The two tangents you can draw to a circle from one point outside it; the distances from that point to the two points of contact are equal.Taught in 4.8 Circle theorems II
- term
- One part of an expression, split off by a or sign that is not inside brackets, with that sign included; the terms of are , and . Each number in a sequence is also called a term.Taught in 2.1 Introduction to algebra
- term-to-term rule
- The rule that gets each term of a sequence from the term before it, such as "add " or "divide by ".Taught in 2.7 Sequences
- time zone
- A region of the world where clocks all show the same local time; a place hours ahead of another has clocks showing hours later.Taught in 1.15 Time
- transformation
- A rule that moves a shape or changes its size, such as a reflection, rotation, translation or enlargement.Taught in 7.1 Transformations
- translation
- A transformation that slides every point of a shape the same distance in the same direction, given by a column vector.Taught in 7.1 Transformations
- trapezium
- A quadrilateral with one pair of parallel sides, where the other two sides are not parallel.Taught in 4.1 Geometrical terms
- travel graph
- A graph of a journey, with time across and distance from the start up; it is also called a distance–time graph.Taught in 2.9 Graphs in practical situations
- tree diagram
- A diagram with a column of branches for each stage. Each outcome is written at the end of its branch and its probability beside the branch; multiply along a path to find its probability.Taught in 8.3 Probability of combined events
- trigonometric equation
- An equation with an unknown angle inside , or , such as ; solving it means finding every angle in the given range that makes it true.Taught in 6.4 Trigonometric functions
- turning point
- A point where a curve changes from going down to going up (a minimum) or from going up to going down (a maximum).Taught in 2.11 Sketching curves
- two-way table
- A table that sorts data by two features at once, one down the side and one across the top, so each cell counts the items that have both.Taught in 9.1 Classifying statistical data
U
- union
- The union of sets and , written , is the set of elements in or or both.Taught in 1.2 Sets
- universal set
- The universal set, , is the set of every element being considered in a question, drawn as the rectangle in a Venn diagram.Taught in 1.2 Sets
- upper bound
- The value that a rounded value must stay below, because values from it upwards round up to the next value; for a calculation, the limit its answer cannot go above.Taught in 1.10 Limits of accuracy
V
- variable
- A letter, such as or , that stands for a number which can change or take many values.Taught in 2.1 Introduction to algebra
- vector
- A quantity with both a size and a direction, such as a move on a grid; it is often written as a column vector.Taught in 7.1 Transformations
- Venn diagram
- A Venn diagram shows the universal set as a rectangle and each set as a circle inside it, with overlaps for elements the sets share.Taught in 1.2 Sets
- vertex
- A corner of a shape or solid, where sides or edges meet; the plural is vertices.Taught in 4.1 Geometrical terms
- vertically opposite angles
- The pair of angles opposite each other where two straight lines cross; they are always equal.Taught in 4.6 Angles
- volume
- The amount of space inside a solid, measured in cubic units such as or .Taught in 5.4 Surface area and volume
W
- with replacement
- Picking an item and putting it back before the next pick, so each pick has the same probabilities.Taught in 8.3 Probability of combined events
- without replacement
- Picking an item and not putting it back, so there is one item fewer and the probabilities change for the next pick.Taught in 8.3 Probability of combined events
Y
- y-intercept
- The value of where a line crosses the -axis; for it is , and the line meets the -axis at the point .Taught in 3.5 Equations of linear graphs